From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1752104AbdBTJjA (ORCPT <rfc822;w@1wt.eu>);
        Mon, 20 Feb 2017 04:39:00 -0500
Received: from lelnx194.ext.ti.com ([198.47.27.80]:40403 "EHLO
        lelnx194.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1751068AbdBTJi6 (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Mon, 20 Feb 2017 04:38:58 -0500
Subject: Re: [PATCH 4/4] ARM: dts: da850-evm: add the UI expander node
To: Bartosz Golaszewski <bgolaszewski@baylibre.com>,
        David Lechner <david@lechnology.com>,
        Kevin Hilman <khilman@baylibre.com>,
        Michael Turquette <mturquette@baylibre.com>,
        Patrick Titiano <ptitiano@baylibre.com>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
        Russell King <linux@armlinux.org.uk>
References: <1487268932-6469-1-git-send-email-bgolaszewski@baylibre.com>
 <1487268932-6469-5-git-send-email-bgolaszewski@baylibre.com>
CC: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>
From: Sekhar Nori <nsekhar@ti.com>
Message-ID: <5f194c6d-0937-bac2-31cd-2f1658f68d0d@ti.com>
Date: Mon, 20 Feb 2017 15:06:44 +0530
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101
 Thunderbird/45.7.0
MIME-Version: 1.0
In-Reply-To: <1487268932-6469-5-git-send-email-bgolaszewski@baylibre.com>
Content-Type: text/plain; charset="windows-1252"
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

On Thursday 16 February 2017 11:45 PM, Bartosz Golaszewski wrote:
> If we're using the UI board and want vpif capture, we need to select
> the video capture functionality by driving the sel_c pin low on the
> tca6416 expander and sel_a & sel_b pins high. Do it statically by
> hogging relevant GPIOs in the device tree.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/boot/dts/da850-evm.dts | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index b549861..a90c764 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -9,6 +9,7 @@
>   */
>  /dts-v1/;
>  #include "da850.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>  
>  / {
>  	compatible = "ti,da850-evm", "ti,da850";
> @@ -78,7 +79,33 @@
>  				DRVDD-supply = <&vbat>;
>  				DVDD-supply = <&vbat>;
>  			};

> +			ui_expander: tca6416@20 {

This should be called:

			tca6416: gpio@20 {

in keeping with ePAPR 1.1 generic node names recommendation.

> +				compatible = "ti,tca6416";
> +				reg = <0x20>;
> +				gpio-controller;
> +				#gpio-cells = <2>;
>  
> +				sel_a {
> +					gpio-hog;
> +					gpios = <7 GPIO_ACTIVE_HIGH>;
> +					output-high;
> +					line-name = "sel_a";
> +				};
> +
> +				sel_b {
> +					gpio-hog;
> +					gpios = <6 GPIO_ACTIVE_HIGH>;
> +					output-high;
> +					line-name = "sel_b";
> +				};
> +
> +				sel_c {
> +					gpio-hog;
> +					gpios = <5 GPIO_ACTIVE_HIGH>;
> +					output-low;
> +					line-name = "sel_c";

I think this is better handled by using an enable-gpios property in vpif
capture device-tree node. So in the vpif capture node you would have:

	enable-gpios =  <&tca6416 7 GPIO_ACTIVE_HIGH
			 &tca6416 6 GPIO_ACTIVE_HIGH
			 &tca6416 5 GPIO_ACTIVE_LOW>;

and in the vpif capture driver, you would request each of these gpios
using: devm_gpiod_get_array_optional(.., .., GPIOD_OUT_HIGH);

Thanks,
Sekhar