From: Joshua Clayton <stillcompiling@gmail.com>
To: Moritz Fischer <moritz.fischer@ettus.com>
Cc: Alan Tull <atull@opensource.altera.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Russell King <linux@armlinux.org.uk>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 5/5] fpga manager: cyclone-ps-spi: make delay variable
Date: Fri, 28 Oct 2016 12:49:08 -0700 [thread overview]
Message-ID: <5f349105-8567-0baf-fbda-71aca35f0c39@gmail.com> (raw)
In-Reply-To: <20161028174142.GA18325@live.com>
Hi Moritz,
Thanks for the review.
On 10/28/2016 10:41 AM, Moritz Fischer wrote:
> Hi Joshua,
>
> looks good to me; however, I think since you're adding initial support,
> I'd squash this together with [3/5].
I agree. I didn't want to squash it in before putting it up for review, though.
>
> On Fri, Oct 28, 2016 at 09:56:42AM -0700, Joshua Clayton wrote:
>> The status pin may not show ready in the time described in the
>> Altetera manual. check the value several times before giving up
> s/Altetera/Altera
Thanks. I'll fix this. And it will go away when it gets squashed.
>> For the hardware I am working on, the status pin takes 250 us,
>> 5 times as long as described by Altera.
>>
>> Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
>> ---
>> drivers/fpga/cyclone-ps-spi.c | 13 ++++++++-----
>> 1 file changed, 8 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/fpga/cyclone-ps-spi.c b/drivers/fpga/cyclone-ps-spi.c
>> index 4b70d5c..c368223 100644
>> --- a/drivers/fpga/cyclone-ps-spi.c
>> +++ b/drivers/fpga/cyclone-ps-spi.c
>> @@ -20,6 +20,7 @@
>>
>> #define FPGA_RESET_TIME 50 /* time in usecs to trigger FPGA config */
>> -#define FPGA_MIN_DELAY 250 /* min usecs to wait for config status */
>> +#define FPGA_MIN_DELAY 50 /* min usecs to wait for config status */
>> +#define FPGA_MAX_DELAY 1000 /* max usecs to wait for config status */
>>
>> struct cyclonespi_conf {
>> struct gpio_desc *config;
>> @@ -42,6 +43,7 @@ static int cyclonespi_write_init(struct fpga_manager *mgr, u32 flags,
>> const char *buf, size_t count)
>> {
>> struct cyclonespi_conf *conf = (struct cyclonespi_conf *)mgr->priv;
>> + int i;
>>
>> if (flags & FPGA_MGR_PARTIAL_RECONFIG) {
>> dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
>> @@ -56,13 +58,14 @@ static int cyclonespi_write_init(struct fpga_manager *mgr, u32 flags,
>> }
>>
>> gpiod_set_value(conf->config, 1);
>> - usleep_range(FPGA_MIN_DELAY, FPGA_MIN_DELAY + 20);
>> - if (gpiod_get_value(conf->status) == 0) {
>> - dev_err(&mgr->dev, "Status pin not ready.\n");
>> - return -EIO;
>> + for (i = 0; i < (FPGA_MAX_DELAY / FPGA_MIN_DELAY); i++) {
>> + usleep_range(FPGA_MIN_DELAY, FPGA_MIN_DELAY + 20);
>> + if (gpiod_get_value(conf->status))
>> + return 0;
>> }
>>
>> - return 0;
>> + dev_err(&mgr->dev, "Status pin not ready.\n");
>> + return -EIO;
>> }
>>
>> static void rev_buf(void *buf, size_t len)
>> --
>> 2.7.4
>>
> Cheers,
>
> Moritz
Joshua
prev parent reply other threads:[~2016-10-28 19:49 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-28 16:56 [PATCH v2 0/4] Altera Cyclone Passive Serial SPI FPGA Manager Joshua Clayton
2016-10-28 16:56 ` [PATCH v2 1/5] lib: add bitrev8x4() Joshua Clayton
2016-10-28 18:50 ` kbuild test robot
2016-10-28 16:56 ` [PATCH v2 2/5] doc: dt: add cyclone-spi binding document Joshua Clayton
2016-10-31 6:16 ` Rob Herring
2016-10-28 16:56 ` [PATCH v2 3/5] fpga manager: Add cyclone-ps-spi driver for Altera FPGAs Joshua Clayton
2016-10-28 18:55 ` kbuild test robot
2016-10-28 19:26 ` kbuild test robot
2016-10-28 20:41 ` kbuild test robot
2016-10-28 21:05 ` Joshua Clayton
2016-10-28 16:56 ` [PATCH v2 4/5] ARM: dts: imx6q-evi: support cyclonespi Joshua Clayton
2016-10-28 16:56 ` [PATCH v2 5/5] fpga manager: cyclone-ps-spi: make delay variable Joshua Clayton
2016-10-28 17:41 ` Moritz Fischer
2016-10-28 19:49 ` Joshua Clayton [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5f349105-8567-0baf-fbda-71aca35f0c39@gmail.com \
--to=stillcompiling@gmail.com \
--cc=atull@opensource.altera.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=moritz.fischer@ettus.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome