From: Marek Vasut <marek.vasut@gmail.com>
To: Philipp Zabel <p.zabel@pengutronix.de>, Lee Jones <lee.jones@linaro.org>
Cc: linux-kernel@vger.kernel.org, kernel@pengutronix.de,
Marek Vasut <marek.vasut+renesas@gmail.com>,
Mark Brown <broonie@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: Re: [PATCH] regulator: da9063: fix DT probing with constraints
Date: Fri, 31 Aug 2018 15:09:39 +0200 [thread overview]
Message-ID: <5f3b9c9c-27ae-cfc3-07df-04c01c313ddd@gmail.com> (raw)
In-Reply-To: <20180831123402.9494-1-p.zabel@pengutronix.de>
On 08/31/2018 02:34 PM, Philipp Zabel wrote:
> Commit 1c892e38ce59 ("regulator: da9063: Handle less LDOs on DA9063L")
> reordered the da9063_regulator_info[] array, but not the DA9063_ID_*
> regulator ids and not the da9063_matches[] array, because ids are used
> as indices in the array initializer. This mismatch between regulator id
> and da9063_regulator_info[] array index causes the driver probe to fail
> because constraints from DT are not applied to the correct regulator:
>
> da9063 0-0058: Device detected (chip-ID: 0x61, var-ID: 0x50)
> DA9063_BMEM: Bringing 900000uV into 3300000-3300000uV
> DA9063_LDO9: Bringing 3300000uV into 2500000-2500000uV
> DA9063_LDO1: Bringing 900000uV into 3300000-3300000uV
> DA9063_LDO1: failed to apply 3300000-3300000uV constraint(-22)
>
> This patch reorders the DA9063_ID_* as apparently intended, and with
> them the entries in the da90630_matches[] array.
>
> Fixes: 1c892e38ce59 ("regulator: da9063: Handle less LDOs on DA9063L")
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Lee Jones <lee.jones@linaro.org>
Thanks
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
> ---
> include/linux/mfd/da9063/pdata.h | 16 +++++++++-------
> 1 file changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/include/linux/mfd/da9063/pdata.h b/include/linux/mfd/da9063/pdata.h
> index 8a125701ef7b..50bed4f89c1a 100644
> --- a/include/linux/mfd/da9063/pdata.h
> +++ b/include/linux/mfd/da9063/pdata.h
> @@ -21,7 +21,7 @@
> /*
> * Regulator configuration
> */
> -/* DA9063 regulator IDs */
> +/* DA9063 and DA9063L regulator IDs */
> enum {
> /* BUCKs */
> DA9063_ID_BCORE1,
> @@ -37,18 +37,20 @@ enum {
> DA9063_ID_BMEM_BIO_MERGED,
> /* When two BUCKs are merged, they cannot be reused separately */
>
> - /* LDOs */
> + /* LDOs on both DA9063 and DA9063L */
> + DA9063_ID_LDO3,
> + DA9063_ID_LDO7,
> + DA9063_ID_LDO8,
> + DA9063_ID_LDO9,
> + DA9063_ID_LDO11,
> +
> + /* DA9063-only LDOs */
> DA9063_ID_LDO1,
> DA9063_ID_LDO2,
> - DA9063_ID_LDO3,
> DA9063_ID_LDO4,
> DA9063_ID_LDO5,
> DA9063_ID_LDO6,
> - DA9063_ID_LDO7,
> - DA9063_ID_LDO8,
> - DA9063_ID_LDO9,
> DA9063_ID_LDO10,
> - DA9063_ID_LDO11,
> };
>
> /* Regulators platform data */
>
--
Best regards,
Marek Vasut
next prev parent reply other threads:[~2018-08-31 13:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-31 12:34 Philipp Zabel
2018-08-31 12:37 ` Geert Uytterhoeven
2018-08-31 13:09 ` Marek Vasut [this message]
2018-09-10 15:56 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5f3b9c9c-27ae-cfc3-07df-04c01c313ddd@gmail.com \
--to=marek.vasut@gmail.com \
--cc=broonie@kernel.org \
--cc=geert+renesas@glider.be \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marek.vasut+renesas@gmail.com \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®