From: "jiale yao" <19888972804@163.com>
To: "Rameshkumar Sundaram" <rameshkumar.sundaram@oss.qualcomm.com>
Cc: "Jeff Johnson" <jjohnson@kernel.org>,
"Bhagavathi Perumal S" <quic_bperumal@quicinc.com>,
"Balamurugan Selvarajan" <quic_bselvara@quicinc.com>,
"Baochen Qiang" <quic_bqiang@quicinc.com>,
"Wen Gong" <quic_wgong@quicinc.com>,
"Carl Huang" <quic_cjhuang@quicinc.com>,
linux-wireless@vger.kernel.org, ath12k@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re:Re:Re: [PATCH 4/5] wifi: ath12k: avoid IDR mutation during pending mgmt TX cleanup
Date: Sat, 3 Oct 2026 17:23:57 +0800 (CST) [thread overview]
Message-ID: <5fb79006.12d7.1a10113cca9.Coremail.19888972804@163.com> (raw)
In-Reply-To: <77a815e.77f1.1a0e71f6167.Coremail.19888972804@163.com>
At 2026-09-28 16:26:28, "jiale yao" <19888972804@163.com> wrote:
>At 2026-09-28 13:49:54, "Rameshkumar Sundaram" <rameshkumar.sundaram@oss.qualcomm.com> wrote:
>>On 9/26/2026 9:18 PM, Jiale Yao wrote:
>>> ath12k_mac_tx_mgmt_pending_free() is passed as an idr_for_each()
>>> callback and removes the current entry from txmgmt_idr. This can
>>> invalidate the radix-tree iterator retained by idr_for_each().
>>>
>>> Both callers destroy the IDR immediately after the walk, so removing
>>> each entry in the callback is unnecessary. Split skb release from IDR
>>> removal and let the callback release the supplied skb without updating
>>> the IDR. The following idr_destroy() tears down the IDR itself.
>>>
>>> Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
>>> Signed-off-by: Jiale Yao <yaojiale02@163.com>
>>> ---
>>> drivers/net/wireless/ath/ath12k/mac.c | 25 +++++++++++++++----------
>>> 1 file changed, 15 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
>>> index 99bf5cf79d10..7695b21149d1 100644
>>> --- a/drivers/net/wireless/ath/ath12k/mac.c
>>> +++ b/drivers/net/wireless/ath/ath12k/mac.c
>>> @@ -9166,18 +9166,11 @@ static void ath12k_mgmt_over_wmi_tx_drop(struct ath12k *ar, struct sk_buff *skb)
>>> wake_up(&ar->txmgmt_empty_waitq);
>>> }
>>>
>>> -static void ath12k_mac_tx_mgmt_free(struct ath12k *ar, int buf_id)
>>> +static void ath12k_mac_tx_mgmt_free_skb(struct ath12k *ar,
>>> + struct sk_buff *msdu)
>>> {
>>> - struct sk_buff *msdu;
>>> struct ieee80211_tx_info *info;
>>>
>>> - spin_lock_bh(&ar->txmgmt_idr_lock);
>>> - msdu = idr_remove(&ar->txmgmt_idr, buf_id);
>>> - spin_unlock_bh(&ar->txmgmt_idr_lock);
>>> -
>>> - if (!msdu)
>>> - return;
>>> -
>>> dma_unmap_single(ar->ab->dev, ATH12K_SKB_CB(msdu)->paddr, msdu->len,
>>> DMA_TO_DEVICE);
>>>
>>> @@ -9187,11 +9180,23 @@ static void ath12k_mac_tx_mgmt_free(struct ath12k *ar, int buf_id)
>>> ath12k_mgmt_over_wmi_tx_drop(ar, msdu);
>>> }
>>>
>>> +static void ath12k_mac_tx_mgmt_free(struct ath12k *ar, int buf_id)
>>> +{
>>> + struct sk_buff *msdu;
>>> +
>>> + spin_lock_bh(&ar->txmgmt_idr_lock);
>>> + msdu = idr_remove(&ar->txmgmt_idr, buf_id);
>>> + spin_unlock_bh(&ar->txmgmt_idr_lock);
>>> +
>>> + if (msdu)
>>> + ath12k_mac_tx_mgmt_free_skb(ar, msdu);
>>> +}
>>> +
>>> int ath12k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx)
>>> {
>>> struct ath12k *ar = ctx;
>>>
>>> - ath12k_mac_tx_mgmt_free(ar, buf_id);
>>> + ath12k_mac_tx_mgmt_free_skb(ar, skb);
>>
>>this now keeps the freed skbs in the idr for the whole time
>>idr_for_each() runs as opposed to previous implementation which removed
>>the idr entry as well which looked safe.
>
>Thanks for the review.
>
>The original issue is the same as the one fixed by commit c38b1e19485a
>("firmware: arm_scmi: Avoid IDR updates while cleaning channels").
>ath12k_mac_tx_mgmt_pending_free() is called from idr_for_each(), and
>ath12k_mac_tx_mgmt_free() removes the current entry from that same IDR
>before the iterator advances. This can invalidate the iterator state.
>
>You are right that my patch leaves freed skb pointers in the IDR until
>idr_destroy(), which is undesirable.
>
>I will send a v2 using idr_for_each_entry(), which performs a fresh
>idr_get_next() lookup for each iteration. The entry will then be removed
>from the IDR before its skb is freed, avoiding both the invalid iterator
>state and stale skb pointers.
v2 in https://lore.kernel.org/all/20261003092104.520135-1-yaojiale02@163.com/
>
>Thanks,
>Jiale
>
>
>>
>>
>>>
>>> return 0;
>>> }
>>
>>
>>--
>>Ramesh
next prev parent reply other threads:[~2026-10-03 9:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-26 15:48 [PATCH 0/5] wifi: ath: avoid IDR mutation while iterating Jiale Yao
2026-09-26 15:48 ` [PATCH 1/5] wifi: ath10k: avoid IDR mutation during TX cleanup Jiale Yao
2026-09-26 15:48 ` [PATCH 2/5] wifi: ath11k: avoid IDR mutation during pending mgmt " Jiale Yao
2026-09-29 14:01 ` Jeff Johnson
2026-09-26 15:48 ` [PATCH 3/5] wifi: ath11k: avoid IDR mutation during vif " Jiale Yao
2026-09-26 15:48 ` [PATCH 4/5] wifi: ath12k: avoid IDR mutation during pending " Jiale Yao
2026-09-28 5:49 ` Rameshkumar Sundaram
2026-09-28 8:26 ` jiale yao
2026-09-29 13:53 ` Jeff Johnson
2026-10-03 9:23 ` jiale yao [this message]
2026-09-26 15:48 ` [PATCH 5/5] wifi: ath12k: avoid IDR mutation during vif " Jiale Yao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5fb79006.12d7.1a10113cca9.Coremail.19888972804@163.com \
--to=19888972804@163.com \
--cc=ath12k@lists.infradead.org \
--cc=jjohnson@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_bperumal@quicinc.com \
--cc=quic_bqiang@quicinc.com \
--cc=quic_bselvara@quicinc.com \
--cc=quic_cjhuang@quicinc.com \
--cc=quic_wgong@quicinc.com \
--cc=rameshkumar.sundaram@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®