mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Johan Hovold <johan+linaro@kernel.org>, Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
Date: Sat, 12 Nov 2022 10:43:14 +0300	[thread overview]
Message-ID: <5fd7a56f-db12-deb3-753a-22867526d90b@linaro.org> (raw)
In-Reply-To: <20221111085643.9478-18-johan+linaro@kernel.org>

On 11/11/2022 11:56, Johan Hovold wrote:
> It does not really make any sense to keep separate configuration
> structures for the USB and DP parts of the same PHY so merge them.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>   drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
>   1 file changed, 57 insertions(+), 125 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index b27d1821116c..249912b75964 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -798,10 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
>   
>   struct qmp_phy;
>   
> -/* struct qmp_phy_cfg - per-PHY initialization config */
>   struct qmp_phy_cfg {
> -	/* phy-type - PCIE/UFS/USB */
> -	unsigned int type;
>   	int lanes;

int lanes doesn't really make sense here in my opinion. It should be 
usb_lanes and dp_lanes.

>   
>   	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> @@ -864,11 +861,6 @@ struct qmp_phy_cfg {
>   
>   };
>   
> -struct qmp_phy_combo_cfg {
> -	const struct qmp_phy_cfg *usb_cfg;
> -	const struct qmp_phy_cfg *dp_cfg;
> -};
> -
>   /**
>    * struct qmp_phy - per-lane phy descriptor
>    *
> @@ -1008,8 +1000,7 @@ static const char * const sc7180_usb3phy_reset_l[] = {
>   	"phy",
>   };
>   
> -static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> -	.type			= PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
>   	.lanes			= 2,
>   
>   	.serdes_tbl		= qmp_v3_usb3_serdes_tbl,
> @@ -1020,20 +1011,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
>   	.rx_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
>   	.pcs_tbl		= qmp_v3_usb3_pcs_tbl,
>   	.pcs_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> -	.clk_list		= qmp_v3_phy_clk_l,
> -	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
> -	.reset_list		= sc7180_usb3phy_reset_l,
> -	.num_resets		= ARRAY_SIZE(sc7180_usb3phy_reset_l),
> -	.vreg_list		= qmp_phy_vreg_l,
> -	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> -	.regs			= qmp_v3_usb3phy_regs_layout,
> -
> -	.has_pwrdn_delay	= true,
> -};
> -
> -static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> -	.type			= PHY_TYPE_DP,
> -	.lanes			= 2,
>   
>   	.dp_serdes_tbl		= qmp_v3_dp_serdes_tbl,
>   	.dp_serdes_tbl_num	= ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> @@ -1058,15 +1035,19 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
>   	.configure_dp_tx	= qcom_qmp_v3_phy_configure_dp_tx,
>   	.configure_dp_phy	= qcom_qmp_v3_phy_configure_dp_phy,
>   	.calibrate_dp_phy	= qcom_qmp_v3_dp_phy_calibrate,
> -};
>   
> -static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
> -	.usb_cfg		= &sc7180_usb3phy_cfg,
> -	.dp_cfg			= &sc7180_dpphy_cfg,
> +	.clk_list		= qmp_v3_phy_clk_l,
> +	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
> +	.reset_list		= sc7180_usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(sc7180_usb3phy_reset_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= qmp_v3_usb3phy_regs_layout,
> +
> +	.has_pwrdn_delay	= true,
>   };
>   
> -static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
> -	.type			= PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
>   	.lanes			= 2,
>   
>   	.serdes_tbl		= qmp_v3_usb3_serdes_tbl,
> @@ -1077,25 +1058,11 @@ static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
>   	.rx_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
>   	.pcs_tbl		= qmp_v3_usb3_pcs_tbl,
>   	.pcs_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> -	.clk_list		= qmp_v3_phy_clk_l,
> -	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
> -	.reset_list		= msm8996_usb3phy_reset_l,
> -	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
> -	.vreg_list		= qmp_phy_vreg_l,
> -	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> -	.regs			= qmp_v3_usb3phy_regs_layout,
> -
> -	.has_pwrdn_delay	= true,
> -};
>   
> -static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
> -	.type			= PHY_TYPE_DP,
> -	.lanes			= 2,
> -
> -	.serdes_tbl		= qmp_v3_dp_serdes_tbl,
> -	.serdes_tbl_num		= ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> -	.tx_tbl			= qmp_v3_dp_tx_tbl,
> -	.tx_tbl_num		= ARRAY_SIZE(qmp_v3_dp_tx_tbl),
> +	.dp_serdes_tbl		= qmp_v3_dp_serdes_tbl,
> +	.dp_serdes_tbl_num	= ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> +	.dp_tx_tbl		= qmp_v3_dp_tx_tbl,
> +	.dp_tx_tbl_num		= ARRAY_SIZE(qmp_v3_dp_tx_tbl),
>   
>   	.serdes_tbl_rbr		= qmp_v3_dp_serdes_tbl_rbr,
>   	.serdes_tbl_rbr_num	= ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
> @@ -1115,15 +1082,18 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
>   	.configure_dp_tx	= qcom_qmp_v3_phy_configure_dp_tx,
>   	.configure_dp_phy	= qcom_qmp_v3_phy_configure_dp_phy,
>   	.calibrate_dp_phy	= qcom_qmp_v3_dp_phy_calibrate,
> -};
>   
> -static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
> -	.usb_cfg                = &sdm845_usb3phy_cfg,
> -	.dp_cfg                 = &sdm845_dpphy_cfg,
> -};
> +	.clk_list		= qmp_v3_phy_clk_l,
> +	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
> +	.reset_list		= msm8996_usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= qmp_v3_usb3phy_regs_layout,
>   
> -static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> -	.type			= PHY_TYPE_USB3,
> +	.has_pwrdn_delay	= true,
> +};
> +static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
>   	.lanes			= 2,
>   
>   	.serdes_tbl		= sm8150_usb3_serdes_tbl,
> @@ -1136,21 +1106,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
>   	.pcs_tbl_num		= ARRAY_SIZE(sm8150_usb3_pcs_tbl),
>   	.pcs_usb_tbl		= sm8150_usb3_pcs_usb_tbl,
>   	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),
> -	.clk_list		= qmp_v4_phy_clk_l,
> -	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
> -	.reset_list		= msm8996_usb3phy_reset_l,
> -	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
> -	.vreg_list		= qmp_phy_vreg_l,
> -	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> -	.regs			= qmp_v4_usb3phy_regs_layout,
> -	.pcs_usb_offset		= 0x300,
> -
> -	.has_pwrdn_delay	= true,
> -};
> -
> -static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> -	.type			= PHY_TYPE_DP,
> -	.lanes			= 2,
>   
>   	.dp_serdes_tbl		= qmp_v4_dp_serdes_tbl,
>   	.dp_serdes_tbl_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> @@ -1175,15 +1130,20 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
>   	.configure_dp_tx	= qcom_qmp_v4_phy_configure_dp_tx,
>   	.configure_dp_phy	= qcom_qmp_v4_phy_configure_dp_phy,
>   	.calibrate_dp_phy	= qcom_qmp_v4_dp_phy_calibrate,
> -};
>   
> -static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
> -	.usb_cfg		= &sm8150_usb3phy_cfg,
> -	.dp_cfg			= &sc8180x_dpphy_cfg,
> +	.clk_list		= qmp_v4_phy_clk_l,
> +	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
> +	.reset_list		= msm8996_usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= qmp_v4_usb3phy_regs_layout,
> +	.pcs_usb_offset		= 0x300,
> +
> +	.has_pwrdn_delay	= true,
>   };
>   
> -static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
> -	.type			= PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
>   	.lanes			= 2,
>   
>   	.serdes_tbl		= sc8280xp_usb43dp_serdes_tbl,
> @@ -1194,19 +1154,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
>   	.rx_tbl_num		= ARRAY_SIZE(sc8280xp_usb43dp_rx_tbl),
>   	.pcs_tbl		= sc8280xp_usb43dp_pcs_tbl,
>   	.pcs_tbl_num		= ARRAY_SIZE(sc8280xp_usb43dp_pcs_tbl),
> -	.clk_list		= qmp_v4_phy_clk_l,
> -	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
> -	.reset_list		= msm8996_usb3phy_reset_l,
> -	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
> -	.vreg_list		= qmp_phy_vreg_l,
> -	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> -	.regs			= qmp_v4_usb3phy_regs_layout,
> -	.pcs_usb_offset		= 0x300,
> -};
> -
> -static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
> -	.type			= PHY_TYPE_DP,
> -	.lanes			= 2,
>   
>   	.dp_serdes_tbl		= qmp_v5_dp_serdes_tbl,
>   	.dp_serdes_tbl_num	= ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
> @@ -1231,15 +1178,18 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
>   	.configure_dp_tx	= qcom_qmp_v4_phy_configure_dp_tx,
>   	.configure_dp_phy	= qcom_qmp_v5_phy_configure_dp_phy,
>   	.calibrate_dp_phy	= qcom_qmp_v4_dp_phy_calibrate,
> -};
>   
> -static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_cfg = {
> -	.usb_cfg		= &sc8280xp_usb43dp_usb_cfg,
> -	.dp_cfg			= &sc8280xp_usb43dp_dp_cfg,
> +	.clk_list		= qmp_v4_phy_clk_l,
> +	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
> +	.reset_list		= msm8996_usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= qmp_v4_usb3phy_regs_layout,
> +	.pcs_usb_offset		= 0x300,
>   };
>   
> -static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> -	.type			= PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
>   	.lanes			= 2,
>   
>   	.serdes_tbl		= sm8150_usb3_serdes_tbl,
> @@ -1252,21 +1202,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
>   	.pcs_tbl_num		= ARRAY_SIZE(sm8250_usb3_pcs_tbl),
>   	.pcs_usb_tbl		= sm8250_usb3_pcs_usb_tbl,
>   	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl),
> -	.clk_list		= qmp_v4_sm8250_usbphy_clk_l,
> -	.num_clks		= ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> -	.reset_list		= msm8996_usb3phy_reset_l,
> -	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
> -	.vreg_list		= qmp_phy_vreg_l,
> -	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> -	.regs			= qmp_v4_usb3phy_regs_layout,
> -	.pcs_usb_offset		= 0x300,
> -
> -	.has_pwrdn_delay	= true,
> -};
> -
> -static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> -	.type			= PHY_TYPE_DP,
> -	.lanes			= 2,
>   
>   	.dp_serdes_tbl		= qmp_v4_dp_serdes_tbl,
>   	.dp_serdes_tbl_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> @@ -1291,11 +1226,17 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
>   	.configure_dp_tx	= qcom_qmp_v4_phy_configure_dp_tx,
>   	.configure_dp_phy	= qcom_qmp_v4_phy_configure_dp_phy,
>   	.calibrate_dp_phy	= qcom_qmp_v4_dp_phy_calibrate,
> -};
>   
> -static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
> -	.usb_cfg		= &sm8250_usb3phy_cfg,
> -	.dp_cfg			= &sm8250_dpphy_cfg,
> +	.clk_list		= qmp_v4_sm8250_usbphy_clk_l,
> +	.num_clks		= ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> +	.reset_list		= msm8996_usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= qmp_v4_usb3phy_regs_layout,
> +	.pcs_usb_offset		= 0x300,
> +
> +	.has_pwrdn_delay	= true,
>   };
>   
>   static void qmp_combo_configure_lane(void __iomem *base,
> @@ -2720,10 +2661,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
>   	void __iomem *serdes;
>   	void __iomem *usb_serdes;
>   	void __iomem *dp_serdes = NULL;
> -	const struct qmp_phy_combo_cfg *combo_cfg = NULL;
>   	const struct qmp_phy_cfg *cfg = NULL;
> -	const struct qmp_phy_cfg *usb_cfg = NULL;
> -	const struct qmp_phy_cfg *dp_cfg = NULL;
>   	int num, id, expected_phys;
>   	int ret;
>   
> @@ -2734,13 +2672,10 @@ static int qmp_combo_probe(struct platform_device *pdev)
>   	qmp->dev = dev;
>   	dev_set_drvdata(dev, qmp);
>   
> -	combo_cfg = of_device_get_match_data(dev);
> -	if (!combo_cfg)
> +	cfg = of_device_get_match_data(dev);
> +	if (!cfg)
>   		return -EINVAL;
>   
> -	usb_cfg = combo_cfg->usb_cfg;
> -	cfg = usb_cfg; /* Setup clks and regulators */
> -
>   	usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
>   	if (IS_ERR(serdes))
>   		return PTR_ERR(serdes);
> @@ -2753,7 +2688,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
>   	if (IS_ERR(dp_serdes))
>   		return PTR_ERR(dp_serdes);
>   
> -	dp_cfg = combo_cfg->dp_cfg;
>   	expected_phys = 2;
>   
>   	mutex_init(&qmp->phy_mutex);
> @@ -2792,7 +2726,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
>   	id = 0;
>   	for_each_available_child_of_node(dev->of_node, child) {
>   		if (of_node_name_eq(child, "dp-phy")) {
> -			cfg = dp_cfg;
>   			serdes = dp_serdes;
>   
>   			/* Create per-lane phy */
> @@ -2810,7 +2743,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
>   				goto err_node_put;
>   			}
>   		} else if (of_node_name_eq(child, "usb3-phy")) {
> -			cfg = usb_cfg;
>   			serdes = usb_serdes;
>   
>   			/* Create per-lane phy */

-- 
With best wishes
Dmitry


  reply	other threads:[~2022-11-12  7:43 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-11  8:56 [PATCH 00/22] phy: qcom-qmp-combo: preparatory cleanups (set 2/3) Johan Hovold
2022-11-11  8:56 ` [PATCH 01/22] phy: qcom-qmp-combo: sort device-id table Johan Hovold
2022-11-12  6:18   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 02/22] phy: qcom-qmp-combo: move " Johan Hovold
2022-11-12  6:18   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 03/22] phy: qcom-qmp-combo: move pm ops Johan Hovold
2022-11-12  6:19   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 04/22] phy: qcom-qmp-combo: rename PHY ops structures Johan Hovold
2022-11-12  6:19   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 05/22] phy: qcom-qmp-combo: drop unused DP PHY mode op Johan Hovold
2022-11-12  6:19   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 06/22] phy: qcom-qmp-combo: rename USB PHY ops Johan Hovold
2022-11-12  6:20   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 07/22] phy: qcom-qmp-combo: drop unnecessary debug message Johan Hovold
2022-11-12  6:20   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 08/22] phy: qcom-qmp-combo: separate USB and DP init ops Johan Hovold
2022-11-12  6:21   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 09/22] phy: qcom-qmp-combo: rename DP PHY ops Johan Hovold
2022-11-12  6:21   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 10/22] phy: qcom-qmp-combo: separate USB and DP power-on ops Johan Hovold
2022-11-12  7:32   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 11/22] phy: qcom-qmp-combo: clean up serdes initialisation Johan Hovold
2022-11-12  7:33   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 12/22] phy: qcom-qmp-combo: separate USB and DP devicetree parsing Johan Hovold
2022-11-12  7:50   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 13/22] phy: qcom-qmp-combo: add dedicated DP iomem pointers Johan Hovold
2022-11-12  7:36   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 14/22] phy: qcom-qmp-combo: clean up DP configurations Johan Hovold
2022-11-12  7:32   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 15/22] phy: qcom-qmp-combo: rename sc8280xp config Johan Hovold
2022-11-12  7:33   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables Johan Hovold
2022-11-12  7:39   ` Dmitry Baryshkov
2022-11-14  8:38     ` Johan Hovold
2022-11-14  9:49       ` Dmitry Baryshkov
2022-11-14  9:50       ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations Johan Hovold
2022-11-12  7:43   ` Dmitry Baryshkov [this message]
2022-11-14  8:54     ` Johan Hovold
2022-11-14 10:10       ` Dmitry Baryshkov
2022-11-14 10:57         ` Johan Hovold
2022-11-14 10:11   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 18/22] phy: qcom-qmp-combo: merge driver data Johan Hovold
2022-11-12  7:46   ` Dmitry Baryshkov
2022-11-14  9:01     ` Johan Hovold
2022-11-14  9:22       ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 19/22] phy: qcom-qmp-combo: clean up device-tree parsing Johan Hovold
2022-11-12  7:48   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 20/22] phy: qcom-qmp-combo: clean up probe initialisation Johan Hovold
2022-11-12  7:48   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 21/22] phy: qcom-qmp-combo: clean up PHY init Johan Hovold
2022-11-12  7:49   ` Dmitry Baryshkov
2022-11-11  8:56 ` [PATCH 22/22] phy: qcom-qmp-combo: clean up DP callback names Johan Hovold
2022-11-12  7:49   ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5fd7a56f-db12-deb3-753a-22867526d90b@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=johan+linaro@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®