From: "Bryan O'Sullivan" <bos@pathscale.com>
To: akpm@osdl.org, rdreier@cisco.com, mst@mellanox.co.il
Cc: openib-general@openib.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org
Subject: [PATCH 6 of 39] IB/ipath - Allow diags on any unit
Date: Thu, 29 Jun 2006 14:40:57 -0700 [thread overview]
Message-ID: <600ceb6aeb8cba0f0d3a.1151617257@eng-12.pathscale.com> (raw)
In-Reply-To: <patchbomb.1151617251@eng-12.pathscale.com>
There is no longer a /dev/ipath_diag file; instead, there's
/dev/ipath_diag0, 1, etc.
It's still not possible to have diags run on more than one unit at a time,
but that's easy to fix at some point.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
diff -r e4f29a4e0c0f -r 600ceb6aeb8c drivers/infiniband/hw/ipath/ipath_diag.c
--- a/drivers/infiniband/hw/ipath/ipath_diag.c Thu Jun 29 14:33:25 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_diag.c Thu Jun 29 14:33:25 2006 -0700
@@ -67,18 +67,20 @@ static struct file_operations diag_file_
.release = ipath_diag_release
};
-static struct cdev *diag_cdev;
-static struct class_device *diag_class_dev;
-
-int ipath_diag_init(void)
-{
- return ipath_cdev_init(IPATH_DIAG_MINOR, "ipath_diag",
- &diag_file_ops, &diag_cdev, &diag_class_dev);
-}
-
-void ipath_diag_cleanup(void)
-{
- ipath_cdev_cleanup(&diag_cdev, &diag_class_dev);
+int ipath_diag_add(struct ipath_devdata *dd)
+{
+ char name[16];
+
+ snprintf(name, sizeof(name), "ipath_diag%d", dd->ipath_unit);
+
+ return ipath_cdev_init(IPATH_DIAG_MINOR_BASE + dd->ipath_unit, name,
+ &diag_file_ops, &dd->diag_cdev,
+ &dd->diag_class_dev);
+}
+
+void ipath_diag_remove(struct ipath_devdata *dd)
+{
+ ipath_cdev_cleanup(&dd->diag_cdev, &dd->diag_class_dev);
}
/**
@@ -102,8 +104,7 @@ static int ipath_read_umem64(struct ipat
int ret;
/* not very efficient, but it works for now */
- if (reg_addr < dd->ipath_kregbase ||
- reg_end > dd->ipath_kregend) {
+ if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
ret = -EINVAL;
goto bail;
}
@@ -140,8 +141,7 @@ static int ipath_write_umem64(struct ipa
int ret;
/* not very efficient, but it works for now */
- if (reg_addr < dd->ipath_kregbase ||
- reg_end > dd->ipath_kregend) {
+ if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
ret = -EINVAL;
goto bail;
}
@@ -240,59 +240,45 @@ bail:
static int ipath_diag_open(struct inode *in, struct file *fp)
{
+ int unit = iminor(in) - IPATH_DIAG_MINOR_BASE;
struct ipath_devdata *dd;
- int unit = 0; /* XXX this is bogus */
- unsigned long flags;
- int ret;
-
- dd = ipath_lookup(unit);
+ int ret;
mutex_lock(&ipath_mutex);
- spin_lock_irqsave(&ipath_devs_lock, flags);
if (ipath_diag_inuse) {
ret = -EBUSY;
goto bail;
}
- list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
- /*
- * we need at least one infinipath device to be present
- * (don't use INITTED, because we want to be able to open
- * even if device is in freeze mode, which cleared INITTED).
- * There is a small amount of risk to this, which is why we
- * also verify kregbase is set.
- */
-
- if (!(dd->ipath_flags & IPATH_PRESENT) ||
- !dd->ipath_kregbase)
- continue;
-
- ipath_diag_inuse = 1;
- diag_set_link = 0;
- ret = 0;
- goto bail;
- }
-
- ret = -ENODEV;
-
-bail:
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
+ dd = ipath_lookup(unit);
+
+ if (dd == NULL || !(dd->ipath_flags & IPATH_PRESENT) ||
+ !dd->ipath_kregbase) {
+ ret = -ENODEV;
+ goto bail;
+ }
+
+ fp->private_data = dd;
+ ipath_diag_inuse = 1;
+ diag_set_link = 0;
+ ret = 0;
/* Only expose a way to reset the device if we
make it into diag mode. */
- if (ret == 0)
- ipath_expose_reset(&dd->pcidev->dev);
-
+ ipath_expose_reset(&dd->pcidev->dev);
+
+bail:
mutex_unlock(&ipath_mutex);
return ret;
}
-static int ipath_diag_release(struct inode *i, struct file *f)
+static int ipath_diag_release(struct inode *in, struct file *fp)
{
mutex_lock(&ipath_mutex);
ipath_diag_inuse = 0;
+ fp->private_data = NULL;
mutex_unlock(&ipath_mutex);
return 0;
}
@@ -300,16 +286,9 @@ static ssize_t ipath_diag_read(struct fi
static ssize_t ipath_diag_read(struct file *fp, char __user *data,
size_t count, loff_t *off)
{
- int unit = 0; /* XXX provide for reads on other units some day */
- struct ipath_devdata *dd;
+ struct ipath_devdata *dd = fp->private_data;
void __iomem *kreg_base;
ssize_t ret;
-
- dd = ipath_lookup(unit);
- if (!dd) {
- ret = -ENODEV;
- goto bail;
- }
kreg_base = dd->ipath_kregbase;
@@ -329,23 +308,16 @@ static ssize_t ipath_diag_read(struct fi
ret = count;
}
-bail:
return ret;
}
static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
size_t count, loff_t *off)
{
- int unit = 0; /* XXX this is bogus */
- struct ipath_devdata *dd;
+ struct ipath_devdata *dd = fp->private_data;
void __iomem *kreg_base;
ssize_t ret;
- dd = ipath_lookup(unit);
- if (!dd) {
- ret = -ENODEV;
- goto bail;
- }
kreg_base = dd->ipath_kregbase;
if (count == 0)
@@ -364,6 +336,5 @@ static ssize_t ipath_diag_write(struct f
ret = count;
}
-bail:
- return ret;
-}
+ return ret;
+}
diff -r e4f29a4e0c0f -r 600ceb6aeb8c drivers/infiniband/hw/ipath/ipath_driver.c
--- a/drivers/infiniband/hw/ipath/ipath_driver.c Thu Jun 29 14:33:25 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c Thu Jun 29 14:33:25 2006 -0700
@@ -546,6 +546,7 @@ static int __devinit ipath_init_one(stru
ipath_device_create_group(&pdev->dev, dd);
ipathfs_add_device(dd);
ipath_user_add(dd);
+ ipath_diag_add(dd);
ipath_layer_add(dd);
goto bail;
@@ -578,8 +579,9 @@ static void __devexit ipath_remove_one(s
return;
dd = pci_get_drvdata(pdev);
- ipath_layer_del(dd);
- ipath_user_del(dd);
+ ipath_layer_remove(dd);
+ ipath_diag_remove(dd);
+ ipath_user_remove(dd);
ipathfs_remove_device(dd);
ipath_device_remove_group(&pdev->dev, dd);
ipath_cdbg(VERBOSE, "Releasing pci memory regions, dd %p, "
diff -r e4f29a4e0c0f -r 600ceb6aeb8c drivers/infiniband/hw/ipath/ipath_file_ops.c
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c Thu Jun 29 14:33:25 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c Thu Jun 29 14:33:25 2006 -0700
@@ -1443,16 +1443,16 @@ done:
static int ipath_open(struct inode *in, struct file *fp)
{
- int ret, minor;
+ int ret, user_minor;
mutex_lock(&ipath_mutex);
- minor = iminor(in);
+ user_minor = iminor(in) - IPATH_USER_MINOR_BASE;
ipath_cdbg(VERBOSE, "open on dev %lx (minor %d)\n",
- (long)in->i_rdev, minor);
-
- if (minor)
- ret = find_free_port(minor - 1, fp);
+ (long)in->i_rdev, user_minor);
+
+ if (user_minor)
+ ret = find_free_port(user_minor - 1, fp);
else
ret = find_best_unit(fp);
@@ -1860,19 +1860,12 @@ int ipath_user_add(struct ipath_devdata
"error %d\n", -ret);
goto bail;
}
- ret = ipath_diag_init();
- if (ret < 0) {
- ipath_dev_err(dd, "Unable to set up diag support: "
- "error %d\n", -ret);
- goto bail_sma;
- }
-
ret = init_cdev(0, "ipath", &ipath_file_ops, &wildcard_cdev,
&wildcard_class_dev);
if (ret < 0) {
ipath_dev_err(dd, "Could not create wildcard "
"minor: error %d\n", -ret);
- goto bail_diag;
+ goto bail_sma;
}
atomic_set(&user_setup, 1);
@@ -1881,31 +1874,28 @@ int ipath_user_add(struct ipath_devdata
snprintf(name, sizeof(name), "ipath%d", dd->ipath_unit);
ret = init_cdev(dd->ipath_unit + 1, name, &ipath_file_ops,
- &dd->cdev, &dd->class_dev);
+ &dd->user_cdev, &dd->user_class_dev);
if (ret < 0)
ipath_dev_err(dd, "Could not create user minor %d, %s\n",
dd->ipath_unit + 1, name);
goto bail;
-bail_diag:
- ipath_diag_cleanup();
bail_sma:
user_cleanup();
bail:
return ret;
}
-void ipath_user_del(struct ipath_devdata *dd)
-{
- cleanup_cdev(&dd->cdev, &dd->class_dev);
+void ipath_user_remove(struct ipath_devdata *dd)
+{
+ cleanup_cdev(&dd->user_cdev, &dd->user_class_dev);
if (atomic_dec_return(&user_count) == 0) {
if (atomic_read(&user_setup) == 0)
goto bail;
cleanup_cdev(&wildcard_cdev, &wildcard_class_dev);
- ipath_diag_cleanup();
user_cleanup();
atomic_set(&user_setup, 0);
diff -r e4f29a4e0c0f -r 600ceb6aeb8c drivers/infiniband/hw/ipath/ipath_kernel.h
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h Thu Jun 29 14:33:25 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h Thu Jun 29 14:33:25 2006 -0700
@@ -355,8 +355,10 @@ struct ipath_devdata {
char *ipath_freezemsg;
/* pci access data structure */
struct pci_dev *pcidev;
- struct cdev *cdev;
- struct class_device *class_dev;
+ struct cdev *user_cdev;
+ struct cdev *diag_cdev;
+ struct class_device *user_class_dev;
+ struct class_device *diag_class_dev;
/* timer used to prevent stats overflow, error throttling, etc. */
struct timer_list ipath_stats_timer;
/* check for stale messages in rcv queue */
@@ -538,7 +540,7 @@ extern int __ipath_verbs_rcv(struct ipat
extern int __ipath_verbs_rcv(struct ipath_devdata *, void *, void *, u32);
void ipath_layer_add(struct ipath_devdata *);
-void ipath_layer_del(struct ipath_devdata *);
+void ipath_layer_remove(struct ipath_devdata *);
int ipath_init_chip(struct ipath_devdata *, int);
int ipath_enable_wc(struct ipath_devdata *dd);
@@ -552,14 +554,14 @@ void ipath_cdev_cleanup(struct cdev **cd
void ipath_cdev_cleanup(struct cdev **cdevp,
struct class_device **class_devp);
-int ipath_diag_init(void);
-void ipath_diag_cleanup(void);
+int ipath_diag_add(struct ipath_devdata *);
+void ipath_diag_remove(struct ipath_devdata *);
void ipath_diag_bringup_link(struct ipath_devdata *);
extern wait_queue_head_t ipath_sma_state_wait;
int ipath_user_add(struct ipath_devdata *dd);
-void ipath_user_del(struct ipath_devdata *dd);
+void ipath_user_remove(struct ipath_devdata *dd);
struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, gfp_t);
@@ -843,9 +845,10 @@ extern struct mutex ipath_mutex;
#define IPATH_DRV_NAME "ipath_core"
#define IPATH_MAJOR 233
+#define IPATH_USER_MINOR_BASE 0
#define IPATH_SMA_MINOR 128
-#define IPATH_DIAG_MINOR 129
-#define IPATH_NMINORS 130
+#define IPATH_DIAG_MINOR_BASE 129
+#define IPATH_NMINORS 255
#define ipath_dev_err(dd,fmt,...) \
do { \
diff -r e4f29a4e0c0f -r 600ceb6aeb8c drivers/infiniband/hw/ipath/ipath_layer.c
--- a/drivers/infiniband/hw/ipath/ipath_layer.c Thu Jun 29 14:33:25 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_layer.c Thu Jun 29 14:33:25 2006 -0700
@@ -404,7 +404,7 @@ void ipath_layer_add(struct ipath_devdat
mutex_unlock(&ipath_layer_mutex);
}
-void ipath_layer_del(struct ipath_devdata *dd)
+void ipath_layer_remove(struct ipath_devdata *dd)
{
mutex_lock(&ipath_layer_mutex);
next prev parent reply other threads:[~2006-06-29 22:04 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-29 21:40 [PATCH 0 of 39] ipath - bug fixes, performance enhancements, and portability improvements Bryan O'Sullivan
2006-06-29 21:40 ` [PATCH 1 of 39] IB/ipath - Name zero counter offsets so it's clear they aren't counters Bryan O'Sullivan
2006-06-29 21:40 ` [PATCH 2 of 39] IB/ipath - update copyrights and other strings to reflect new company name Bryan O'Sullivan
2006-06-29 21:40 ` [PATCH 3 of 39] IB/ipath - Share more common code between RC and UC protocols Bryan O'Sullivan
2006-06-29 21:40 ` [PATCH 4 of 39] IB/ipath - fix an indenting problem Bryan O'Sullivan
2006-06-29 21:40 ` [PATCH 5 of 39] IB/ipath - fix shared receive queues for RC Bryan O'Sullivan
2006-06-29 21:40 ` Bryan O'Sullivan [this message]
2006-06-29 21:40 ` [PATCH 7 of 39] IB/ipath - update some comments and fix typos Bryan O'Sullivan
2006-06-29 21:40 ` [PATCH 8 of 39] IB/ipath - remove some duplicate code Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 9 of 39] IB/ipath - don't allow resources to be created with illegal values Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 10 of 39] IB/ipath - fix some memory leaks on failure paths Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 11 of 39] IB/ipath - return an error for unknown multicast GID Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 12 of 39] IB/ipath - report correct device identification information in /sys Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 13 of 39] IB/ipath - enforce device resource limits Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 14 of 39] IB/ipath - removed unused field ipath_kregvirt from struct ipath_devdata Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 15 of 39] IB/ipath - print better debug info when handling 32/64-bit DMA mask problems Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 16 of 39] IB/ipath - enable freeze mode when shutting down device Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 17 of 39] IB/ipath - use more appropriate gfp flags Bryan O'Sullivan
2006-06-30 0:02 ` Andrew Morton
2006-06-29 21:41 ` [PATCH 18 of 39] IB/ipath - use vmalloc to allocate struct ipath_devdata Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 19 of 39] IB/ipath - memory management cleanups Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 20 of 39] IB/ipath - reduce overhead on receive interrupts Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 21 of 39] IB/ipath - fixed bug 9776 for real. The problem was that I was updating Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 22 of 39] IB/ipath - fix lost interrupts on HT-400 Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 23 of 39] IB/ipath - disallow send of invalid packet sizes over UD Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 24 of 39] IB/ipath - don't confuse the max message size with the MTU Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 25 of 39] IB/ipath - removed redundant statements Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 26 of 39] IB/ipath - check for valid LID and multicast LIDs Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 27 of 39] IB/ipath - fixes to performance get counters for IB compliance Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 28 of 39] IB/ipath - Fixes a bug where our delay for EEPROM no longer works due to compiler reordering Bryan O'Sullivan
2006-06-30 0:07 ` Andrew Morton
2006-06-30 21:08 ` Roland Dreier
2006-06-29 21:41 ` [PATCH 29 of 39] IB/ipath - RC receive interrupt performance changes Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 30 of 39] IB/ipath - purge sps_lid and sps_mlid arrays Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 31 of 39] IB/ipath - drop the "stats" sysfs attribute group Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 32 of 39] IB/ipath - support more models of InfiniPath hardware Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 33 of 39] IB/ipath - read/write correct sizes through diag interface Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 34 of 39] IB/ipath - fix a bug that results in addresses near 0 being written via DMA Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 35 of 39] IB/ipath - remove some #if 0 code related to lockable memory Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 36 of 39] IB/ipath - Ignore receive queue size if SRQ is specified Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 37 of 39] IB/ipath - namespace cleanup: replace ips with ipath Bryan O'Sullivan
2006-06-29 21:41 ` [PATCH 38 of 39] IB/ipath - More changes to support InfiniPath on PowerPC 970 systems Bryan O'Sullivan
2006-06-29 21:53 ` David Miller
2006-06-29 22:01 ` Bryan O'Sullivan
2006-06-29 22:04 ` David Miller
2006-07-03 22:25 ` Anton Blanchard
2006-07-04 4:55 ` Michael S. Tsirkin
2006-07-06 22:37 ` Benjamin Herrenschmidt
2006-07-06 23:34 ` Bryan O'Sullivan
2006-07-06 23:39 ` Benjamin Herrenschmidt
2006-06-29 21:41 ` [PATCH 39 of 39] IB/ipath - use streaming copy in RDMA interrupt handler to reduce packet loss Bryan O'Sullivan
2006-06-29 21:50 ` David Miller
2006-06-29 21:59 ` Bryan O'Sullivan
2006-06-29 22:03 ` David Miller
2006-06-29 23:34 ` Bryan O'Sullivan
2006-06-29 23:46 ` David Miller
2006-06-29 23:55 ` [openib-general] " Ralph Campbell
2006-06-30 0:28 ` Rick Jones
2006-06-30 0:32 ` David Miller
2006-06-30 0:44 ` Rick Jones
2006-06-30 0:47 ` David Miller
2006-06-30 16:31 ` [PATCH 0 of 39] ipath - bug fixes, performance enhancements,and portability improvements Michael S. Tsirkin
2006-06-30 17:00 ` Bryan O'Sullivan
2006-07-01 19:43 ` [PATCH 0 of 39] ipath - bug fixes, performanceenhancements,and " Michael S. Tsirkin
2006-07-01 22:35 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=600ceb6aeb8cba0f0d3a.1151617257@eng-12.pathscale.com \
--to=bos@pathscale.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mst@mellanox.co.il \
--cc=netdev@vger.kernel.org \
--cc=openib-general@openib.org \
--cc=rdreier@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome