Re: [PATCHv2 00/10] Nokia N950 basic display support

[Tomi Valkeinen <tomi.valkeinen@ti.com>]

[-- Attachment #1.1: Type: text/plain, Size: 1727 bytes --]

On 20/03/17 13:29, Tomi Valkeinen wrote:
> Hi,
> 
> On 05/03/17 01:50, Sebastian Reichel wrote:
>> Hi,
>>
>> Some of you may remember, that I sent a series for the N950 display
>> some time ago. N950 has command mode DSI panel, so the main part of
>> the patchset takes care of adding manual display update support in
>> omapdrm.
>>
>> The N950 also requires display rotation (the panel is mounted vertically
>> and bottom-up) and offset. The required bits will be sent separately.
>>
>> The patchset is based on 2d62e0768d3c, which is the current commit
>> torvald's master branch points to. I tested the patches on N950
>> with kernel console (fbcon), Tomi's kmstest and Xorg from Debian sid.
>>
>> Rough changelog, most of that work was done by Tony (thanks!)
>>
>>  * lots of patches dropped for now
>>  * rebased to current omapdrm interface
>>  * added OMAP4 support
>>  * misc. cleanup
> 
> I haven't been able to go through this series with time, but looking at
> the patches, there were multiple places where I felt quite uneasy with
> the changes. It didn't help that many of the patches did not have
> descriptions.
> 
> So as an RFC series, it's quite nice and shows that the manual update
> can be gotten to work. But I'm not ready to apply this until the patches
> touching the omapdrm enable, disable and commit sequences are split up
> into smaller patches with proper descriptions.

I made a quick test on my OMAP4 SDP (it has similar panel to N950), and
I did get a picture on the LCD, and kmstest --flip works. It's tearing,
though, and the fps is ~80, so apparently TE signal is not used for
synchronization here. I think nobody is calling the enable_te().

 Tomi


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]