From: Dan Carpenter <dan.carpenter@linaro.org>
To: "Benoît Sevens" <bsevens@google.com>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
wangdicheng <wangdicheng@kylinos.cn>,
Manuel Barrio Linares <mbarriolinares@gmail.com>,
Lianqin Hu <hulianqin@vivo.com>,
Shen Lichuan <shenlichuan@vivo.com>,
Cyan Nyan <cyan.vtb@gmail.com>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel-janitors@vger.kernel.org
Subject: [PATCH] ALSA: usb-audio: Fix a DMA to stack memory bug
Date: Mon, 2 Dec 2024 15:57:54 +0300 [thread overview]
Message-ID: <60e3aa09-039d-46d2-934c-6f123026c2eb@stanley.mountain> (raw)
The usb_get_descriptor() function does DMA so we're not allowed
to use a stack buffer for that. Doing DMA to the stack is not portable
all architectures. Move the "new_device_descriptor" from being stored
on the stack and allocate it with kmalloc() instead.
Fixes: b909df18ce2a ("ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices")
Cc: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
---
sound/usb/quirks.c | 42 +++++++++++++++++++++++++++---------------
1 file changed, 27 insertions(+), 15 deletions(-)
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 8bc959b60be3..7c9d352864da 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -555,7 +555,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
{
struct usb_host_config *config = dev->actconfig;
- struct usb_device_descriptor new_device_descriptor;
+ struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL;
int err;
if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
@@ -566,15 +566,19 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac
0x10, 0x43, 0x0001, 0x000a, NULL, 0);
if (err < 0)
dev_dbg(&dev->dev, "error sending boot message: %d\n", err);
+
+ new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL);
+ if (!new_device_descriptor)
+ return -ENOMEM;
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &new_device_descriptor, sizeof(new_device_descriptor));
+ new_device_descriptor, sizeof(*new_device_descriptor));
if (err < 0)
dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
- if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+ if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations)
dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
- new_device_descriptor.bNumConfigurations);
+ new_device_descriptor->bNumConfigurations);
else
- memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
+ memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor));
err = usb_reset_configuration(dev);
if (err < 0)
dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
@@ -906,7 +910,7 @@ static void mbox2_setup_48_24_magic(struct usb_device *dev)
static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
{
struct usb_host_config *config = dev->actconfig;
- struct usb_device_descriptor new_device_descriptor;
+ struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL;
int err;
u8 bootresponse[0x12];
int fwsize;
@@ -941,15 +945,19 @@ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
dev_dbg(&dev->dev, "device initialised!\n");
+ new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL);
+ if (!new_device_descriptor)
+ return -ENOMEM;
+
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &new_device_descriptor, sizeof(new_device_descriptor));
+ new_device_descriptor, sizeof(*new_device_descriptor));
if (err < 0)
dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
- if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+ if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations)
dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
- new_device_descriptor.bNumConfigurations);
+ new_device_descriptor->bNumConfigurations);
else
- memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
+ memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor));
err = usb_reset_configuration(dev);
if (err < 0)
@@ -1259,7 +1267,7 @@ static void mbox3_setup_defaults(struct usb_device *dev)
static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
{
struct usb_host_config *config = dev->actconfig;
- struct usb_device_descriptor new_device_descriptor;
+ struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL;
int err;
int descriptor_size;
@@ -1272,15 +1280,19 @@ static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
dev_dbg(&dev->dev, "MBOX3: device initialised!\n");
+ new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL);
+ if (!new_device_descriptor)
+ return -ENOMEM;
+
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &new_device_descriptor, sizeof(new_device_descriptor));
+ new_device_descriptor, sizeof(*new_device_descriptor));
if (err < 0)
dev_dbg(&dev->dev, "MBOX3: error usb_get_descriptor: %d\n", err);
- if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+ if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations)
dev_dbg(&dev->dev, "MBOX3: error too large bNumConfigurations: %d\n",
- new_device_descriptor.bNumConfigurations);
+ new_device_descriptor->bNumConfigurations);
else
- memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
+ memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor));
err = usb_reset_configuration(dev);
if (err < 0)
--
2.45.2
next reply other threads:[~2024-12-02 12:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-02 12:57 Dan Carpenter [this message]
2024-12-02 15:05 ` Benoît Sevens
2024-12-02 15:31 ` Takashi Iwai
2024-12-02 15:43 ` Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=60e3aa09-039d-46d2-934c-6f123026c2eb@stanley.mountain \
--to=dan.carpenter@linaro.org \
--cc=bsevens@google.com \
--cc=cyan.vtb@gmail.com \
--cc=hulianqin@vivo.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=mbarriolinares@gmail.com \
--cc=perex@perex.cz \
--cc=shenlichuan@vivo.com \
--cc=tiwai@suse.com \
--cc=wangdicheng@kylinos.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®