mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: David Daney <david.daney@cavium.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 2/7] genirq: Add handle_fasteoi_{level,edge}_irq flow handlers.
Date: Fri, 18 Aug 2017 10:28:05 +0100	[thread overview]
Message-ID: <6100c1d2-537e-7cb0-0f38-18c0f6b78aa6@arm.com> (raw)
In-Reply-To: <1503017616-3252-3-git-send-email-david.daney@cavium.com>

On 18/08/17 01:53, David Daney wrote:
> Follow-on patch for gpio-thunderx uses a irqdomain hierarchy which
> requires slightly different flow handlers, add them to chip.c which
> contains most of the other flow handlers.  Make these conditionally
> compiled based on CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS.
> 
> Signed-off-by: David Daney <david.daney@cavium.com>

Nit: $SUBJECT doesn't reflect the new function names.

> ---
>  include/linux/irq.h |   2 +
>  kernel/irq/Kconfig  |   4 ++
>  kernel/irq/chip.c   | 106 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 112 insertions(+)
> 
> diff --git a/include/linux/irq.h b/include/linux/irq.h
> index d2d54379..d4728bf 100644
> --- a/include/linux/irq.h
> +++ b/include/linux/irq.h
> @@ -568,6 +568,8 @@ static inline int irq_set_parent(int irq, int parent_irq)
>  extern int irq_chip_pm_get(struct irq_data *data);
>  extern int irq_chip_pm_put(struct irq_data *data);
>  #ifdef	CONFIG_IRQ_DOMAIN_HIERARCHY
> +extern void handle_fasteoi_ack_irq(struct irq_desc *desc);
> +extern void handle_fasteoi_mask_irq(struct irq_desc *desc);
>  extern void irq_chip_enable_parent(struct irq_data *data);
>  extern void irq_chip_disable_parent(struct irq_data *data);
>  extern void irq_chip_ack_parent(struct irq_data *data);
> diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
> index 27c4e77..aada687 100644
> --- a/kernel/irq/Kconfig
> +++ b/kernel/irq/Kconfig
> @@ -68,6 +68,10 @@ config IRQ_DOMAIN_HIERARCHY
>  	bool
>  	select IRQ_DOMAIN
>  
> +# Support for hierarchical fasteoi+edge and fasteoi+level handlers
> +config IRQ_FASTEOI_HIERARCHY_HANDLERS
> +	bool
> +
>  # Generic IRQ IPI support
>  config GENERIC_IRQ_IPI
>  	bool
> diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
> index 6514f07..2395898 100644
> --- a/kernel/irq/chip.c
> +++ b/kernel/irq/chip.c
> @@ -1092,6 +1092,112 @@ void irq_cpu_offline(void)
>  }
>  
>  #ifdef	CONFIG_IRQ_DOMAIN_HIERARCHY
> +
> +#ifdef CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS
> +/**
> + *	handle_fasteoi_ack_irq - irq handler for edge hierarchy
> + *	stacked on transparent controllers
> + *
> + *	@desc:	the interrupt description structure for this irq
> + *
> + *	Like handle_fasteoi_irq(), but for use with hierarchy where
> + *	the irq_chip also needs to have its ->irq_ack() function
> + *	called.
> + */
> +void handle_fasteoi_ack_irq(struct irq_desc *desc)
> +{
> +	struct irq_chip *chip = desc->irq_data.chip;
> +
> +	raw_spin_lock(&desc->lock);
> +
> +	if (!irq_may_run(desc))
> +		goto out;
> +
> +	desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
> +
> +	/*
> +	 * If its disabled or no action available
> +	 * then mask it and get out of here:
> +	 */
> +	if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
> +		desc->istate |= IRQS_PENDING;
> +		mask_irq(desc);
> +		goto out;
> +	}
> +
> +	kstat_incr_irqs_this_cpu(desc);
> +	if (desc->istate & IRQS_ONESHOT)
> +		mask_irq(desc);
> +
> +	/* Start handling the irq */
> +	desc->irq_data.chip->irq_ack(&desc->irq_data);
> +
> +	preflow_handler(desc);
> +	handle_irq_event(desc);
> +
> +	cond_unmask_eoi_irq(desc, chip);
> +
> +	raw_spin_unlock(&desc->lock);
> +	return;
> +out:
> +	if (!(chip->flags & IRQCHIP_EOI_IF_HANDLED))
> +		chip->irq_eoi(&desc->irq_data);
> +	raw_spin_unlock(&desc->lock);
> +}
> +EXPORT_SYMBOL_GPL(handle_fasteoi_ack_irq);
> +
> +/**
> + *	handle_fasteoi_mask_irq - irq handler for level hierarchy
> + *	stacked on transparent controllers
> + *
> + *	@desc:	the interrupt description structure for this irq
> + *
> + *	Like handle_fasteoi_irq(), but for use with hierarchy where
> + *	the irq_chip also needs to have its ->irq_mask_ack() function
> + *	called.
> + */
> +void handle_fasteoi_mask_irq(struct irq_desc *desc)
> +{
> +	struct irq_chip *chip = desc->irq_data.chip;
> +
> +	raw_spin_lock(&desc->lock);
> +	mask_ack_irq(desc);
> +
> +	if (!irq_may_run(desc))
> +		goto out;
> +
> +	desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
> +
> +	/*
> +	 * If its disabled or no action available
> +	 * then mask it and get out of here:
> +	 */
> +	if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
> +		desc->istate |= IRQS_PENDING;
> +		mask_irq(desc);
> +		goto out;
> +	}
> +
> +	kstat_incr_irqs_this_cpu(desc);
> +	if (desc->istate & IRQS_ONESHOT)
> +		mask_irq(desc);
> +
> +	preflow_handler(desc);
> +	handle_irq_event(desc);
> +
> +	cond_unmask_eoi_irq(desc, chip);
> +
> +	raw_spin_unlock(&desc->lock);
> +	return;
> +out:
> +	if (!(chip->flags & IRQCHIP_EOI_IF_HANDLED))
> +		chip->irq_eoi(&desc->irq_data);
> +	raw_spin_unlock(&desc->lock);
> +}
> +EXPORT_SYMBOL_GPL(handle_fasteoi_mask_irq);
> +
> +#endif /* CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS */
> +
>  /**
>   * irq_chip_enable_parent - Enable the parent interrupt (defaults to unmask if
>   * NULL)
> 

Acked-by: Marc Zyngier <marc.zyngier@arm.com>

	M.
-- 
Jazz is not dead. It just smells funny...

  parent reply	other threads:[~2017-08-18  9:28 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-18  0:53 [PATCH v8 0/7] genirq/gpio: Add driver for ThunderX and OCTEON-TX SoCs David Daney
2017-08-18  0:53 ` [PATCH v8 1/7] genirq: Export more irq_chip_*_parent() functions David Daney
2017-08-18  9:27   ` [tip:irq/core] " tip-bot for David Daney
2017-08-18  0:53 ` [PATCH v8 2/7] genirq: Add handle_fasteoi_{level,edge}_irq flow handlers David Daney
2017-08-18  9:28   ` [tip:irq/core] " tip-bot for David Daney
2017-08-18  9:28   ` Marc Zyngier [this message]
2017-08-18  9:32     ` [PATCH v8 2/7] " Thomas Gleixner
2017-08-18  0:53 ` [PATCH v8 3/7] irqdomain: Factor out code to add and remove items to and from the revmap David Daney
2017-08-18  9:15   ` Marc Zyngier
2017-08-18  9:28   ` [tip:irq/core] " tip-bot for David Daney
2017-08-18  0:53 ` [PATCH v8 4/7] irqdomain: Check for NULL function pointer in irq_domain_free_irqs_hierarchy() David Daney
2017-08-18  9:16   ` Marc Zyngier
2017-08-18  9:28   ` [tip:irq/core] " tip-bot for David Daney
2017-08-18  0:53 ` [PATCH v8 5/7] irqdomain: Add irq_domain_{push,pop}_irq() functions David Daney
2017-08-18  9:17   ` Marc Zyngier
2017-08-18  9:29   ` [tip:irq/core] " tip-bot for David Daney
2017-08-18  0:53 ` [PATCH v8 6/7] gpio: Add gpio driver support for ThunderX and OCTEON-TX David Daney
2017-08-22 12:29   ` Linus Walleij
2017-08-18  0:53 ` [PATCH v8 7/7] MAINTAINERS: Add entry for THUNDERX GPIO Driver David Daney
2017-08-22 12:30   ` Linus Walleij
2017-08-18  9:24 ` [PATCH v8 0/7] genirq/gpio: Add driver for ThunderX and OCTEON-TX SoCs Thomas Gleixner
2017-08-18 18:07   ` David Daney
2017-08-20  9:36     ` Thomas Gleixner
2017-08-22 12:32     ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6100c1d2-537e-7cb0-0f38-18c0f6b78aa6@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=david.daney@cavium.com \
    --cc=gnurou@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®