From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934331AbYD1Oyp (ORCPT ); Mon, 28 Apr 2008 10:54:45 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S934538AbYD1OyU (ORCPT ); Mon, 28 Apr 2008 10:54:20 -0400 Received: from fg-out-1718.google.com ([72.14.220.155]:30542 "EHLO fg-out-1718.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934102AbYD1OyR (ORCPT ); Mon, 28 Apr 2008 10:54:17 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=abwJUR7RIX/kayJaS4LhXjT+7TVOyGmP1Yl95Tjhm3pysGT4tssg1JBmYSV3eYigdccIbTHOC+ldzvnZ+rHVwzqBNcSeKSo8MEsXg1qtZp0bvZVhMyT9tHWrF+iq05FlH0MjyDh9DFy91a65hcYArJMSUNtvH4yag9CTkWzvDEg= Message-ID: <6101e8c40804280754r68e84ee1r8ba4984007fdcfeb@mail.gmail.com> Date: Mon, 28 Apr 2008 16:54:14 +0200 From: "Oliver Pinter" To: "Gabor Gombas" Subject: Re: Solid freezes with 2.6.25 Cc: linux-kernel@vger.kernel.org, "Ingo Molnar" , "Thomas Gleixner" In-Reply-To: <20080428142935.GQ14074@boogie.lpds.sztaki.hu> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <20080428142935.GQ14074@boogie.lpds.sztaki.hu> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org [add CC] On 4/28/08, Gabor Gombas wrote: > Hi, > > I'm seeing solid freezes with 2.6.25. 2.6.24.x works fine, 2.6.25 never > had an uptime longer than 4-6 hours so far. netconsole captured the > following: > > NMI Watchdog detected LOCKUP on CPU 1 > CPU 1 > Modules linked in: edd netconsole configfs i915 radeon drm rfcomm l2cap > bluetooth xfrm_user xfrm4_tunnel tunnel4 ipcomp esp4 aead ah4 nfsd lockd > nfs_acl auth_rpcgss sunrpc exportfs ipt_ULOG microcode ipt_REJECT > nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp ipt_LOG xt_limit > iptable_filter ip_tables x_tables deflate zlib_deflate zlib_inflate ctr > twofish twofish_common camellia serpent blowfish des_generic cbc aes_x86_64 > aes_generic xcbc sha256_generic sha1_generic md5 crypto_null af_key fuse > dm_crypt crypto_blkcipher dm_snapshot dm_mirror dm_mod coretemp w83627ehf > hwmon_vid snd_hda_intel snd_pcm 8250_pnp snd_timer 8250 sg snd 8139too > serial_core video r8169 snd_page_alloc usbhid i2c_i801 sr_mod iTCO_wdt > floppy cdrom [last unloaded: netconsole] > Pid: 2535, comm: postgres Not tainted 2.6.25 #11 > RIP: 0010:[] [] > hpet_rtc_interrupt+0x11a/0x2fd > RSP: 0000:ffff81012fc77ec8 EFLAGS: 00200097 > RAX: 0000000000000000 RBX: 0000000000200002 RCX: 0000000000000000 > RDX: 000000000000c6c6 RSI: 0000000000200002 RDI: ffffffff80655ef8 > RBP: 000000010011144c R08: ffffffffff5fc128 R09: 0000000000000000 > R10: 0000000000200046 R11: 0000000000000000 R12: 00000000000000a6 > R13: ffff81012fcf8800 R14: 0000000000000000 R15: 0000000000000000 > FS: 0000000000000000(0000) GS:ffff81012fc0f480(0063) knlGS:00000000f7f228e0 > CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 > CR2: 00000000f1559000 CR3: 0000000128cd8000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process postgres (pid: 2535, threadinfo ffff810128d18000, task > ffff81012cbb6930) > Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > ffffffff00000000 0000000000000001 ffffffff806432c0 ffff81012fe25bc0 > 0000000000000000 0000000000000000 0000000000000008 ffffffff8025d6d0 > Call Trace: > [] ? handle_IRQ_event+0x25/0x53 > [] ? handle_edge_irq+0xdd/0x11c > [] ? call_softirq+0x1c/0x28 > [] ? do_IRQ+0xf1/0x15f > [] ? ret_from_intr+0x0/0xa > > > Code: a0 28 00 bf 0a 00 00 00 48 89 c3 e8 73 6b ff ff 48 89 de 41 88 c4 48 > c7 c7 f8 5e 65 80 e8 14 a1 28 00 45 84 e4 78 04 eb 12 f3 90 <48> 8b 05 25 1e > 3e 00 48 29 e8 48 83 f8 04 76 ee 48 c7 c7 f8 5e > ---[ end trace 8625c90c6582673f ]--- > Kernel panic - not syncing: Aiee, killing interrupt handler! > > Also, I have these messages in syslog: > > Apr 28 13:13:31 boogie kernel: rtc: lost 157 interrupts > Apr 28 13:13:32 boogie kernel: rtc: lost 37 interrupts > Apr 28 13:25:37 boogie kernel: rtc: lost 60 interrupts > > More info about the machine is attached. I've also seen similar hangs with > 2.6.25-rc6 on an nforce4/Athlon64 box but I'm reluctant to re-test there > because RAID rebuild takes too long. > > Gabor > > dmesg: > ====== > > Initializing cgroup subsys cpuset > Linux version 2.6.25 (gombasg@boogie) (gcc version 4.2.3 (Debian 4.2.3-3)) > #11 SMP Mon Apr 28 10:41:10 CEST 2008 > Command line: BOOT_IMAGE=l2625 ro root=900 video=intelfb:1280x1024-16@60 > resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2 single > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000cf2ac000 (usable) > BIOS-e820: 00000000cf2ac000 - 00000000cf2ef000 (ACPI NVS) > BIOS-e820: 00000000cf2ef000 - 00000000cf3c7000 (reserved) > BIOS-e820: 00000000cf3c7000 - 00000000cf3d7000 (ACPI NVS) > BIOS-e820: 00000000cf3d7000 - 00000000cf453000 (reserved) > BIOS-e820: 00000000cf453000 - 00000000cf459000 (ACPI data) > BIOS-e820: 00000000cf459000 - 00000000cf45a000 (ACPI NVS) > BIOS-e820: 00000000cf45a000 - 00000000cf45c000 (ACPI data) > BIOS-e820: 00000000cf45c000 - 00000000cf45d000 (ACPI NVS) > BIOS-e820: 00000000cf45d000 - 00000000cf45e000 (reserved) > BIOS-e820: 00000000cf45e000 - 00000000cf463000 (ACPI NVS) > BIOS-e820: 00000000cf463000 - 00000000cf472000 (reserved) > BIOS-e820: 00000000cf472000 - 00000000cf600000 (usable) > BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) > BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved) > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > BIOS-e820: 0000000100000000 - 0000000130000000 (usable) > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 848556) 1 entries of 256 used > Entering add_active_range(0, 849010, 849408) 2 entries of 256 used > Entering add_active_range(0, 1048576, 1245184) 3 entries of 256 used > end_pfn_map = 1245184 > DMI 2.4 present. > ACPI: RSDP 000F03C0, 0024 (r2 INTEL) > ACPI: XSDT CF45AF10, 0044 (r1 INTEL DG31PR 6222004 MSFT 10013) > ACPI: FACP CF458D90, 00F4 (r4 INTEL DG31PR 6222004 MSFT 10013) > ACPI: DSDT CF453010, 4D33 (r1 INTEL DG31PR 0 INTL 20051117) > ACPI: FACS CF459F40, 0040 > ACPI: APIC CF458F10, 006C (r2 INTEL DG31PR 6222004 MSFT 10013) > ACPI: HPET CF461D10, 0038 (r1 INTEL ICH7HPET 6222004 AMI. 1) > ACPI: MCFG CF461C10, 003C (r1 INTEL DG31PR 6222004 MSFT 97) > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 848556) 1 entries of 256 used > Entering add_active_range(0, 849010, 849408) 2 entries of 256 used > Entering add_active_range(0, 1048576, 1245184) 3 entries of 256 used > early res: 0 [0-fff] BIOS data page > early res: 1 [6000-7fff] SMP_TRAMPOLINE > early res: 2 [200000-6bc61b] TEXT DATA BSS > early res: 3 [9fc00-a0bff] EBDA > early res: 4 [8000-dfff] PGTABLE > [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 > [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 > [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 > [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 > [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 > [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 > [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 > [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 > [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 > [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 > [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 > [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 > [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 > [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 > [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 > [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 > [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 > [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 > [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 > [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 > [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 > [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0 > [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0 > [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0 > [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0 > [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0 > [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0 > [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0 > [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0 > [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0 > [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0 > [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0 > [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0 > [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0 > [ffffe20004400000-ffffe200045fffff] PMD ->ffff810009a00000 on node 0 > [ffffe20004600000-ffffe200047fffff] PMD ->ffff810009e00000 on node 0 > [ffffe20004800000-ffffe200049fffff] PMD ->ffff81000a200000 on node 0 > [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff81000a600000 on node 0 > Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1245184 > Movable zone start PFN for each node > early_node_map[4] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 848556 > 0: 849010 -> 849408 > 0: 1048576 -> 1245184 > On node 0 totalpages: 1045465 > DMA zone: 64 pages used for memmap > DMA zone: 1224 pages reserved > DMA zone: 2711 pages, LIFO batch:0 > DMA32 zone: 16320 pages used for memmap > DMA32 zone: 828538 pages, LIFO batch:31 > Normal zone: 3072 pages used for memmap > Normal zone: 193536 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x408 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 (Bootup-CPU) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) > ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 0, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to flat > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at d0000000 (gap: cf600000:2f71c000) > SMP: Allowing 4 CPUs, 2 hotplug CPUs > PERCPU: Allocating 34112 bytes of per cpu data > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1024785 > Kernel command line: BOOT_IMAGE=l2625 ro root=900 > video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 > nmi_watchdog=2 single > audit: enabled (after initialization) > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > TSC calibrated against PM_TIMER > time.c: Detected 2199.955 MHz processor. > Console: colour VGA+ 80x50 > console [tty0] enabled > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Checking aperture... > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > Placing software IO TLB between 0xae21000 - 0xee21000 > Memory: 4025872k/4980736k available (2717k kernel code, 155356k reserved, > 1280k data, 248k init) > CPA: page pool initialized 1 of 1 pages preallocated > SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 > hpet clockevent registered > Calibrating delay using timer specific routine.. 4403.20 BogoMIPS > (lpj=8806400) > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > Initializing cgroup subsys memory > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU0: Thermal monitoring enabled (TM2) > using mwait in idle threads. > ACPI: Core revision 20070126 > Using local APIC timer interrupts. > APIC timer calibration result 12499744 > Detected 12.499 MHz APIC timer. > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 4399.88 BogoMIPS > (lpj=8799778) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Thermal monitoring enabled (TM2) > Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > Brought up 2 CPUs > Testing NMI watchdog ... OK. > CPU0 attaching sched-domain: > domain 0: span 3 > groups: 1 2 > CPU1 attaching sched-domain: > domain 0: span 3 > groups: 2 1 > net_namespace: 1016 bytes > xor: automatically using best checksumming function: generic_sse > generic_sse: 8072.000 MB/sec > xor: using function: generic_sse (8072.000 MB/sec) > NET: Registered protocol family 16 > No dock devices found. > ACPI: bus type pci registered > PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved > PCI: Not using MMCONFIG. > PCI: Using configuration type 1 > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: BIOS _OSI(Linux) query ignored > ACPI: DMI System Vendor: > ACPI: DMI Product Name: > ACPI: DMI Product Version: > ACPI: DMI Board Name: DG31PR > ACPI: DMI BIOS Vendor: Intel Corp. > ACPI: DMI BIOS Date: 02/27/2008 > ACPI: Please send DMI info above to linux-acpi@vger.kernel.org > ACPI: If "acpi_osi=Linux" works better, please notify > linux-acpi@vger.kernel.org > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > PCI-GART: No AMD northbridge found. > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 64-bit timers, 14318180 Hz > ACPI: RTC can wake from S4 > system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved > system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved > system 00:02: ioport range 0x400-0x47f has been reserved > system 00:02: ioport range 0x1180-0x119f has been reserved > system 00:02: ioport range 0x500-0x53f has been reserved > system 00:02: iomem range 0xfec00000-0xfecfffff has been reserved > system 00:02: iomem range 0xfee00000-0xfee0ffff could not be reserved > system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved > system 00:02: iomem range 0xffb00000-0xffcfffff could not be reserved > system 00:02: iomem range 0xfc800000-0xfc800fff has been reserved > system 00:02: iomem range 0xfed20000-0xfed7ffff has been reserved > system 00:02: iomem range 0xffe00000-0xffffffff could not be reserved > system 00:03: ioport range 0x290-0x29f has been reserved > system 00:0a: ioport range 0x4d0-0x4d1 has been reserved > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.1 > IO window: e000-efff > MEM window: 0xff800000-0xff8fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: d000-dfff > MEM window: 0xff700000-0xff7fffff > PREFETCH window: disabled. > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > audit: initializing netlink socket (enabled) > type=2000 audit(1209386619.444:1): initialized > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > SELinux: Registering netfilter hooks > async_tx: api initialized (sync-only) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci 0000:00:02.0: Boot video device > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00:1c.0:pcie02] > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.1:pcie00] > Allocate Port Service[0000:00:1c.1:pcie02] > input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Sleep Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 > ACPI: Sleep Button (CM) [SLPB] > input: Power Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 > ACPI: Power Button (CM) [PWRB] > ACPI: SSDT CF45EC10, 02CC (r1 AMI IST 1 MSFT 3000001) > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: ACPI0007:00 is registered as cooling_device0 > ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: ACPI0007:01 is registered as cooling_device1 > hpet_resources: 0xfed00000 is busy > Linux agpgart interface v0.103 > agpgart: Detected an Intel G33 Chipset. > agpgart: Detected 7164K stolen memory. > Switched to high resolution mode on CPU 1 > Switched to high resolution mode on CPU 0 > agpgart: AGP aperture is 256M @ 0xd0000000 > Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 > seconds). > Hangcheck: Using get_cycles(). > intelfb: Framebuffer driver for Intel(R) > 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets > intelfb: Version 0.9.4 > Driver 'sd' needs updating - please use bus_type methods > ata_piix 0000:00:1f.1: version 2.12 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1f.1 to 64 > scsi0 : ata_piix > scsi1 : ata_piix > ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14 > ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15 > ata1.00: ATAPI: ASUS DRW-1814BL, 1.13, max UDMA/66 > ata1.00: configured for UDMA/66 > ata2: port disabled. ignoring. > scsi 0:0:0:0: CD-ROM ASUS DRW-1814BL 1.13 PQ: 0 ANSI: 5 > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > scsi2 : ata_piix > scsi3 : ata_piix > ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 17 > ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 17 > ata3.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133 > ata3.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata3.00: configured for UDMA/133 > ata4.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133 > ata4.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata4.00: configured for UDMA/133 > scsi 2:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5 > sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB) > sd 2:0:0:0: [sda] Write Protect is off > sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB) > sd 2:0:0:0: [sda] Write Protect is off > sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > sda: sda1 sda2 sda3 < sda5 > > sd 2:0:0:0: [sda] Attached SCSI disk > scsi 3:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5 > sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB) > sd 3:0:0:0: [sdb] Write Protect is off > sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB) > sd 3:0:0:0: [sdb] Write Protect is off > sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > sdb: sdb1 sdb2 sdb3 < sdb5 > > sd 3:0:0:0: [sdb] Attached SCSI disk > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff984000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 > PNP: PS/2 appears to have AUX port disabled, if this is incorrect please > boot with i8042.nopnp > serio: i8042 KBD port at 0x60,0x64 irq 1 > mice: PS/2 mouse device common for all mice > usb 1-2: new high speed USB device using ehci_hcd and address 3 > rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one year, y3k > i2c /dev entries driver > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > md: raid10 personality registered for level 10 > input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input3 > raid6: int64x1 2069 MB/s > usb 1-2: configuration #1 chosen from 1 choice > hub 1-2:1.0: USB hub found > hub 1-2:1.0: 4 ports detected > raid6: int64x2 2606 MB/s > raid6: int64x4 2493 MB/s > raid6: int64x8 2015 MB/s > raid6: sse2x1 3509 MB/s > raid6: sse2x2 3917 MB/s > usb 2-1: new low speed USB device using uhci_hcd and address 2 > raid6: sse2x4 6646 MB/s > raid6: using algorithm sse2x4 (6646 MB/s) > md: raid6 personality registered for level 6 > md: raid5 personality registered for level 5 > md: raid4 personality registered for level 4 > EDAC MC: Ver: 2.1.0 Apr 25 2008 > cpuidle: using governor ladder > cpuidle: using governor menu > TCP cubic registered > NET: Registered protocol family 1 > Marking TSC unstable due to TSC halts in idle > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > NET: Registered protocol family 17 > registered taskstats version 1 > rtc_cmos 00:08: setting system clock to 2008-04-28 12:43:41 UTC (1209386621) > md: Autodetecting RAID arrays. > md: invalid raid superblock magic on sda5 > md: sda5 does not have a valid v0.90 superblock, not importing! > usb 2-1: configuration #1 chosen from 1 choice > md: invalid raid superblock magic on sdb5 > md: sdb5 does not have a valid v0.90 superblock, not importing! > md: Scanned 4 and added 2 devices. > md: autorun ... > md: considering sdb1 ... > md: adding sdb1 ... > md: adding sda1 ... > md: created md0 > md: bind > md: bind > md: running: > raid1: raid set md0 active with 2 out of 2 mirrors > md: ... autorun DONE. > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 248k freed > SELinux:8192 avtab hash slots allocated. Num of rules:71699 > SELinux:8192 avtab hash slots allocated. Num of rules:71699 > security: 7 users, 7 roles, 1457 types, 61 bools > security: 69 classes, 71699 rules > SELinux: Completing initialization. > SELinux: Setting up existing superblocks. > SELinux: initialized (dev md0, type ext3), uses xattr > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > SELinux: initialized (dev devpts, type devpts), uses transition SIDs > SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses > genfs_contexts > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs > SELinux: initialized (dev proc, type proc), uses genfs_contexts > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > SELinux: policy loaded with handle_unknown=deny > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 > r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > eth0: RTL8168b/8111b at 0xffffc20000020000, 00:1c:c0:34:06:c9, XID 38500000 > IRQ 380 > udev: renamed network interface eth0 to mobo > ACPI Exception (video-1613): AE_NOT_FOUND, Evaluating _DOD [20070126] > input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input4 > FDC 0 is a post-1991 82077 > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) > iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > Driver 'sr' needs updating - please use bus_type methods > sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 0:0:0:0: Attached scsi CD-ROM sr0 > 8139too Fast Ethernet driver 0.9.28 > ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21 > eth0: RealTek RTL8139 at 0xffffc20000022000, 00:c1:28:01:d5:f6, IRQ 21 > eth0: Identified 8139 chip type 'RTL-8139C' > sr 0:0:0:0: Attached scsi generic sg0 type 5 > sd 2:0:0:0: Attached scsi generic sg1 type 0 > sd 3:0:0:0: Attached scsi generic sg2 type 0 > ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) > udev: renamed network interface eth0 to rtl > input: Logitech USB RECEIVER as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5 > input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1 > usbcore: registered new interface driver usbhid > drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > printk: 21 messages suppressed. > Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k > Adding 2008116k swap on /dev/sdb2. Priority:-2 extents:1 across:2008116k > EXT3 FS on md0, internal journal > w83627ehf: Found W83627DHG chip at 0x290 > coretemp coretemp.0: Using relative temperature scale! > coretemp coretemp.1: Using relative temperature scale! > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: > dm-devel@redhat.com > md: md3 stopped. > md: bind > md: bind > md: md3: raid array is not clean -- starting background reconstruction > raid1: raid set md3 active with 2 out of 2 mirrors > md: resync of RAID array md3 > md: minimum _guaranteed_ speed: 1000 KB/sec/disk. > md: using maximum available idle IO bandwidth (but not more than 200000 > KB/sec) for resync. > md: using 128k window, over a total of 240235840 blocks. > md: resuming resync of md3 from checkpoint. > fuse init (API version 7.9) > SELinux: initialized (dev fusectl, type fusectl), not configured for > labeling > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-0, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: initialized (dev dm-0, type ext3), uses xattr > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: initialized (dev dm-1, type ext3), uses xattr > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-2, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: initialized (dev dm-2, type ext3), uses xattr > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: initialized (dev dm-3, type ext3), uses xattr > printk: 129 messages suppressed. > NET: Registered protocol family 15 > printk: 15 messages suppressed. > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > r8169: mobo: link up > r8169: mobo: link up > rtl: link down > ADDRCONF(NETDEV_UP): rtl: link is not ready > printk: 111 messages suppressed. > ttyS1: LSR safety check engaged! > ttyS1: LSR safety check engaged! > > lspci -vvvnn: > ============= > > 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM > Controller [8086:29c0] (rev 02) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Capabilities: [e0] Vendor Specific Information > Kernel driver in use: agpgart-intel > > 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI > Express Root Port [8086:29c1] (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000] > Capabilities: [80] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable+ > Address: fee0300c Data: 4159 > Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, > L1 <8us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- > ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Off, PwrInd On, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Kernel driver in use: pcieport-driver > > 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 > Express Integrated Graphics Controller [8086:29c2] (rev 02) > Subsystem: Intel Corporation 82G33/G31 Express Integrated Graphics > Controller [8086:29c2] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at ff900000 (32-bit, non-prefetchable) [size=512K] > Region 1: I/O ports at f140 [size=8] > Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] > Region 3: Memory at ff600000 (32-bit, non-prefetchable) [size=1M] > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > Address: 00000000 Data: 0000 > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High > Definition Audio Controller [8086:27d8] (rev 01) > Subsystem: Intel Corporation Device [8086:d608] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at ff980000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, > L1 <1us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- > ABWMgmt- > Kernel driver in use: HDA Intel > Kernel modules: snd-hda-intel > > 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI > Express Port 1 [8086:27d0] (rev 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 > unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 > <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- > ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ > Slot # 1, PowerLimit 10.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable+ > Address: fee0300c Data: 4161 > Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI > Express Port 1 [8086:27d0] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: pcieport-driver > > 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI > Express Port 2 [8086:27d2] (rev 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: ff800000-ff8fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 > unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, > L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- > ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ > Slot # 2, PowerLimit 10.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable+ > Address: fee0300c Data: 4169 > Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI > Express Port 2 [8086:27d2] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: pcieport-driver > > 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #1 [8086:27c8] (rev 01) > Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 > [8086:27c8] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 4: I/O ports at f080 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #2 [8086:27c9] (rev 01) > Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 > [8086:27c9] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 4: I/O ports at f060 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #3 [8086:27ca] (rev 01) > Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 > [8086:27ca] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 4: I/O ports at f040 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #4 [8086:27cb] (rev 01) > Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 > [8086:27cb] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin D routed to IRQ 16 > Region 4: I/O ports at f020 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 > EHCI Controller [8086:27cc] (rev 01) (prog-if 20) > Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller > [8086:27cc] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at ff984000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Kernel driver in use: ehci_hcd > > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] > (rev e1) (prog-if 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: ff700000-ff7fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Subsystem: Gammagraphx, Inc. Device [0000:0000] > > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC > Interface Bridge [8086:27b8] (rev 01) > Subsystem: Intel Corporation Device [8086:544e] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Capabilities: [e0] Vendor Specific Information > Kernel modules: iTCO_wdt > > 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE > Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) > Subsystem: Intel Corporation 82801G (ICH7 Family) IDE Controller > [8086:27df] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at f0f0 [size=16] > Kernel driver in use: ata_piix > > 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) > SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP > PriO]) > Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE > Controller [8086:27c0] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin B routed to IRQ 17 > Region 0: I/O ports at f0e0 [size=8] > Region 1: I/O ports at f0d0 [size=4] > Region 2: I/O ports at f0c0 [size=8] > Region 3: I/O ports at f0b0 [size=4] > Region 4: I/O ports at f0a0 [size=16] > Capabilities: [70] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ata_piix > > 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus > Controller [8086:27da] (rev 01) > Subsystem: Intel Corporation Device [8086:d608] > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin B routed to IRQ 17 > Region 4: I/O ports at f000 [size=32] > Kernel driver in use: i801_smbus > Kernel modules: i2c-i801 > > 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) > Subsystem: Intel Corporation Device [8086:d608] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 380 > Region 0: I/O ports at e000 [size=256] > Region 2: Memory at ff820000 (64-bit, non-prefetchable) [size=4K] > Expansion ROM at ff800000 [disabled] [size=128K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0-,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [48] Vital Product Data > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 > Enable+ > Address: 00000000fee0300c Data: 4189 > Capabilities: [60] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, L1 > unlimited > ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 4096 bytes > DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, > L1 unlimited > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- > ABWMgmt- > Capabilities: [84] Vendor Specific Information > Kernel driver in use: r8169 > Kernel modules: r8169 > > 04:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) > Subsystem: Compex Device [11f6:8139] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (8000ns min, 16000ns max) > Interrupt: pin A routed to IRQ 21 > Region 0: I/O ports at d000 [size=256] > Region 1: Memory at ff700000 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0-,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: 8139too > Kernel modules: 8139too > > > -- > --------------------------------------------------------- > MTA SZTAKI Computer and Automation Research Institute > Hungarian Academy of Sciences > --------------------------------------------------------- > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > -- Thanks, Oliver