Re: 2.6.19-rc4-mm2

["Andrew Wade" <andrew.j.wade@gmail.com>]

On 11/6/06, Richardson, Charlotte <Charlotte.Richardson@stratus.com> wrote:
> What's the device id of your VC1?

I presume lscpi -n -v will tell you what you need to know. I don't know
how to read the output myself:

0000:01:00.0 0300: 1002:5157
        Subsystem: 1002:013a
        Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 16
        Memory at d8000000 (32-bit, prefetchable) [size=128M]
        I/O ports at d800 [size=256]
        Memory at d7000000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at d7fe0000 [disabled] [size=128K]
        Capabilities: [58] AGP version 2.0
        Capabilities: [50] Power Management version 2

My card is a dual-head card, but I'm only using one head. On that head, if
I switch to virtual console 1, everything is fine, but if I switch to any
other vitual console, the display is "garbled": each row of pixels is offset
from the row before, producing interlaced "ghost" images.

I hope this helps; feel free to ask further questions.

-ajw