From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To: Brian Norris <briannorris@chromium.org>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Lin Huang <hl@rock-chips.com>, Heiko Stuebner <heiko@sntech.de>,
Derek Basehore <dbasehore@chromium.org>,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Rob Herring <robh@kernel.org>
Subject: Re: [PATCH v3 04/15] dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds
Date: Tue, 8 Mar 2022 19:09:11 +0100 [thread overview]
Message-ID: <612d1ee6-aa25-20f8-081a-e6cdfeeafce0@canonical.com> (raw)
In-Reply-To: <20220307160918.v3.4.I01c6a2b2db578136686b42d463af985cfdff2fd9@changeid>
On 08/03/2022 01:09, Brian Norris wrote:
> It's inefficient to use the same number of cycles for all OPPs, since
> lower frequencies make for longer idle times. Let's specify the idle
> time instead, so software can pick the optimal number of cycles on its
> own.
>
> NB: these bindings aren't used anywhere yet.
>
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>
> Changes in v3:
> * Add Reviewed-by
>
> Changes in v2:
> * New patch
>
> .../bindings/devfreq/rk3399_dmc.yaml | 50 +++++++++++++++++--
> 1 file changed, 45 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml
> index 2904ae4115f3..6a33a7b44741 100644
> --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml
> +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml
> @@ -56,42 +56,52 @@ properties:
> being used.
>
> rockchip,pd_idle:
> + deprecated: true
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Configure the PD_IDLE value. Defines the power-down idle period in which
> memories are placed into power-down mode if bus is idle for PD_IDLE DFI
> clock cycles.
> + See also rockchip,pd-idle-ns.
>
> rockchip,sr_idle:
> + deprecated: true
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Configure the SR_IDLE value. Defines the self-refresh idle period in
> which memories are placed into self-refresh mode if bus is idle for
> SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock).
> Default value is "0".
> + See also rockchip,sr-idle-ns.
>
> rockchip,sr_mc_gate_idle:
> + deprecated: true
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Defines the memory self-refresh and controller clock gating idle period.
> Memories are placed into self-refresh mode and memory controller clock
> arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock
> cycles.
> + See also rockchip,sr-mc-gate-idle-ns.
>
> rockchip,srpd_lite_idle:
> + deprecated: true
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Defines the self-refresh power down idle period in which memories are
> placed into self-refresh power down mode if bus is idle for
> srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4
> only.
> + See also rockchip,srpd-lite-idle-ns.
>
> rockchip,standby_idle:
> + deprecated: true
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Defines the standby idle period in which memories are placed into
> self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
> if bus is idle for standby_idle * DFI clock cycles.
> + See also rockchip,standby-idle-ns.
>
> rockchip,dram_dll_dis_freq:
> deprecated: true
> @@ -260,6 +270,36 @@ properties:
> When the DRAM type is LPDDR4, this parameter defines the PHY side ODT
> strength. Default value is 60.
>
> + rockchip,pd-idle-ns:
> + description:
> + Configure the PD_IDLE value in nanoseconds. Defines the power-down idle
> + period in which memories are placed into power-down mode if bus is idle
> + for PD_IDLE nanoseconds.
> +
> + rockchip,sr-idle-ns:
> + description:
> + Configure the SR_IDLE value in nanoseconds. Defines the self-refresh idle
> + period in which memories are placed into self-refresh mode if bus is idle
> + for SR_IDLE nanoseconds. Default value is "0".
Use "default: 0".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Best regards,
Krzysztof
next prev parent reply other threads:[~2022-03-08 18:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-08 0:09 [PATCH v3 00/15] rk3399: Clean up and enable DDR DVFS Brian Norris
2022-03-08 0:09 ` [PATCH v3 01/15] dt-bindings: devfreq: rk3399_dmc: Convert to YAML Brian Norris
2022-03-08 18:03 ` Krzysztof Kozlowski
2022-03-08 19:06 ` Brian Norris
2022-03-08 0:09 ` [PATCH v3 02/15] dt-bindings: devfreq: rk3399_dmc: Deprecate unused/redundant properties Brian Norris
2022-03-08 18:04 ` Krzysztof Kozlowski
2022-03-08 0:09 ` [PATCH v3 03/15] dt-bindings: devfreq: rk3399_dmc: Fix Hz units Brian Norris
2022-03-08 18:05 ` Krzysztof Kozlowski
2022-03-08 0:09 ` [PATCH v3 04/15] dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds Brian Norris
2022-03-08 18:09 ` Krzysztof Kozlowski [this message]
2022-03-08 0:09 ` [PATCH v3 05/15] dt-bindings: devfreq: rk3399_dmc: Add more disable-freq properties Brian Norris
2022-03-08 18:10 ` Krzysztof Kozlowski
2022-03-08 0:09 ` [PATCH v3 06/15] PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props Brian Norris
2022-03-08 0:09 ` [PATCH v3 07/15] PM / devfreq: rk3399_dmc: Drop excess timing properties Brian Norris
2022-03-08 0:09 ` [PATCH v3 08/15] PM / devfreq: rk3399_dmc: Use bitfield macro definitions for ODT_PD Brian Norris
2022-03-08 0:09 ` [PATCH v3 09/15] PM / devfreq: rk3399_dmc: Support new disable-freq properties Brian Norris
2022-03-08 0:09 ` [PATCH v3 10/15] PM / devfreq: rk3399_dmc: Support new *-ns properties Brian Norris
2022-03-08 0:09 ` [PATCH v3 11/15] arm64: dts: rk3399: Add dfi and dmc nodes Brian Norris
2022-03-08 0:09 ` [PATCH v3 12/15] arm64: dts: rockchip: Enable dmc and dfi nodes on gru Brian Norris
2022-03-08 0:09 ` [PATCH v3 13/15] PM / devfreq: rk3399_dmc: Disable edev on remove() Brian Norris
2022-03-08 0:09 ` [PATCH v3 14/15] PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table() Brian Norris
2022-03-08 0:09 ` [PATCH v3 15/15] PM / devfreq: rk3399_dmc: Avoid static (reused) profile Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=612d1ee6-aa25-20f8-081a-e6cdfeeafce0@canonical.com \
--to=krzysztof.kozlowski@canonical.com \
--cc=briannorris@chromium.org \
--cc=cw00.choi@samsung.com \
--cc=dbasehore@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=hl@rock-chips.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=myungjoo.ham@samsung.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®