mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nick Terrell <terrelln@fb.com>
To: Chao Yu <yuchao0@huawei.com>
Cc: Nick Terrell <nickrterrell@gmail.com>,
	"linux-f2fs-devel@lists.sourceforge.net" 
	<linux-f2fs-devel@lists.sourceforge.net>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Kernel Team <Kernel-team@fb.com>, Chris Mason <clm@fb.com>,
	Petr Malat <oss@malat.biz>, Johannes Weiner <jweiner@fb.com>,
	Niket Agarwal <niketa@fb.com>, Yann Collet <cyan@fb.com>
Subject: Re: [PATCH 6/9] f2fs: zstd: Switch to the zstd-1.4.6 API
Date: Fri, 18 Sep 2020 05:39:18 +0000	[thread overview]
Message-ID: <6137F1A4-770E-421D-9B76-1E47A86DC38E@fb.com> (raw)
In-Reply-To: <a8b6e21d-fb51-1a50-8f2a-045f3a496c12@huawei.com>



> On Sep 17, 2020, at 6:47 PM, Chao Yu <yuchao0@huawei.com> wrote:
> 
> On 2020/9/18 3:34, Nick Terrell wrote:
>>> On Sep 17, 2020, at 11:00 AM, Nick Terrell <terrelln@fb.com> wrote:
>>> 
>>> 
>>> 
>>>> On Sep 16, 2020, at 11:31 PM, Chao Yu <yuchao0@huawei.com> wrote:
>>>> 
>>>> Hi Nick,
>>>> 
>>>> On 2020/9/17 2:39, Nick Terrell wrote:
>>>>>> On Sep 15, 2020, at 11:31 PM, Chao Yu <yuchao0@huawei.com> wrote:
>>>>>> 
>>>>>> Hi Nick,
>>>>>> 
>>>>>> remove not related mailing list.
>>>>>> 
>>>>>> On 2020/9/16 11:43, Nick Terrell wrote:
>>>>>>> From: Nick Terrell <terrelln@fb.com>
>>>>>>> Move away from the compatibility wrapper to the zstd-1.4.6 API. This
>>>>>>> code is more efficient because it uses the single-pass API instead of
>>>>>>> the streaming API. The streaming API is not necessary because the whole
>>>>>>> input and output buffers are available. This saves memory because we
>>>>>>> don't need to allocate a buffer for the window. It is also more
>>>>>>> efficient because it saves unnecessary memcpy calls.
>>>>>>> I've had problems testing this code because I see data truncation before
>>>>>>> and after this patchset. Help testing this patch would be much
>>>>>>> appreciated.
>>>>>> 
>>>>>> Can you please explain more about data truncation? I'm a little confused...
>>>>>> 
>>>>>> Do you mean that f2fs doesn't allocate enough memory for zstd compression,
>>>>>> so that compression is not finished actually, the compressed data is truncated
>>>>>> at dst buffer?
>>>>> Hi Chao,
>>>>> I’ve tested F2FS using a benchmark I adapted from testing BtrFS [0]. It is possible
>>>>> that the script I’m using is buggy or is exposing an edge case in F2FS. The files
>>>>> that I copy to F2FS and compress end up truncated with a hole at the end.
>>>> 
>>>> Thanks for your explanation. :)
>>>> 
>>>>> It is based off of upstream commit ab29a807a7.
>>>>> E.g. the end of the copied file looks like this, but the original file has non-zero data
>>>>> In the end. Until the hole at the end the file is correct.
>>>>> od dickens | tail -n 5
>>>>>> 46667760 067502 066167 020056 040440 020163 023511 006555 060412
>>>>>> 46670000 000000 000000 000000 000000 000000 000000 000000 000000
>>>>>> *
>>>>>> 46703060 000000 000000 000000 000000 000000 000000 000000
>>>>>> 46703076
>>>>> [0] https://gist.github.com/terrelln/7dd2919937dfbdb8e839e4ad11c81db4
>>>> 
>>>> Shouldn't we just get sha1 value by flitering sha1sum output?
>>>> 
>>>>               asha=`sha1sum $BENCHMARK_DIR/$file |awk {'print $1'}`
>>>>               bsha=`sha1sum $MP/$i/$file |awk {'print $1'}`
>>> 
>>> Probably, but it was just a quick one-off script.
>> Ah, never mind, you are right.
>>>> I can't reproduce this issue by using simple data sample, could you share
>>>> that 'dickens' file or other smaller-sized sample if you have?
>>> 
>>> The /tmp/silesia directory in the example is populated with all the files from
>>> this website. It is a popular data compression benchmark corpus. You can
>>> click on the “total” link to download a zip archive of all the files.
>>> 
>>> https://urldefense.proofpoint.com/v2/url?u=http-3A__sun.aei.polsl.pl_-7Esdeor_index.php-3Fpage-3Dsilesia&d=DwIDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=HQM5IQdWOB8WaMoii2dYTw&m=-bYa7TavRodl96xy65hjVIkt5HdMldv4LOCRHJf12n8&s=mdX82rCzyHO-Q3KGJ5b94mqDKcDh1IWEqEWfuqw7P3I&e= 
>>> -Nick
>> I’ve spent some time minimizing the test case. This script [0] is the minimized
>> test case that doesn’t require any input files, it builds its own.
>> Several observations:
>> * The input file needs to be 7700481 bytes large, smaller files don’t trigger the bug.
>> * You have to `chattr +c` the file after copying it otherwise the bug doesn’t occur.
>> * After `chattr +c` you have to unmount and remount the filesystem to trigger the bug.
>> I’ve reproduced on v5.9-rc5 (856deb866d16e). I’ve also reproduced on my host machine
>> running 5.8.5-arch1-1.
>> [0] https://gist.github.com/terrelln/4bba325abdfa3a6f014e9911ac92a185
> 
> Ah, I got it.
> 
> Step of enabling compressed inode is not correct, we should touch an empty file, and
> then use 'chattr +c' on that file to enable compression, otherwise the race condition
> could be complicated to handle. So we need below diff to disallow setting compression
> flag on an non-empty file:

Yup, that did the trick. After that change I was able to successfully test F2FS. I found
a bug in my compatibility wrappers, so I’m going to be sending a V2 that fixes it.

I’ll include these numbers in my next commit message, but with these changes F2FS
decompression memory usage drops from 1.4 MB to 160 KB. Decompression speeds
up 20% in total from the entire series, and compression speeds up 8%.

Thanks for the help debugging,
Nick

> diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
> index 8a422400e824..b462db7898fd 100644
> --- a/fs/f2fs/file.c
> +++ b/fs/f2fs/file.c
> @@ -1836,6 +1836,8 @@ static int f2fs_setflags_common(struct inode *inode, u32 iflags, u32 mask)
> 		if (iflags & F2FS_COMPR_FL) {
> 			if (!f2fs_may_compress(inode))
> 				return -EINVAL;
> +			if (get_dirty_pages(inode) || fi->i_compr_blocks)
> +				return  -EINVAL;
> 
> 			set_compress_context(inode);
> 		}
> 
> Could you adjust your script and retest?
> 
> touch $DST_FILE
> chattr +c $DST_FILE
> cp $SRC_FILE $DST_FILE
> 
> Thanks,
> 
>> Best,
>> Nick
>>>> Thanks,
>>>> 
>>>>> Best,
>>>>> Nick
>>>>>> Thanks,
>>>>>> 
>>>>>>> Signed-off-by: Nick Terrell <terrelln@fb.com>
>>>>>>> ---
>>>>>>> fs/f2fs/compress.c | 102 +++++++++++++++++----------------------------
>>>>>>> 1 file changed, 38 insertions(+), 64 deletions(-)
>>>>>>> diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
>>>>>>> index e056f3a2b404..b79efce81651 100644
>>>>>>> --- a/fs/f2fs/compress.c
>>>>>>> +++ b/fs/f2fs/compress.c
>>>>>>> @@ -11,7 +11,8 @@
>>>>>>> #include <linux/backing-dev.h>
>>>>>>> #include <linux/lzo.h>
>>>>>>> #include <linux/lz4.h>
>>>>>>> -#include <linux/zstd_compat.h>
>>>>>>> +#include <linux/zstd.h>
>>>>>>> +#include <linux/zstd_errors.h>
>>>>>>>   #include "f2fs.h"
>>>>>>> #include "node.h"
>>>>>>> @@ -298,21 +299,21 @@ static const struct f2fs_compress_ops f2fs_lz4_ops = {
>>>>>>> static int zstd_init_compress_ctx(struct compress_ctx *cc)
>>>>>>> {
>>>>>>> 	ZSTD_parameters params;
>>>>>>> -	ZSTD_CStream *stream;
>>>>>>> +	ZSTD_CCtx *ctx;
>>>>>>> 	void *workspace;
>>>>>>> 	unsigned int workspace_size;
>>>>>>>   	params = ZSTD_getParams(F2FS_ZSTD_DEFAULT_CLEVEL, cc->rlen, 0);
>>>>>>> -	workspace_size = ZSTD_CStreamWorkspaceBound(params.cParams);
>>>>>>> +	workspace_size = ZSTD_estimateCCtxSize_usingCParams(params.cParams);
>>>>>>>   	workspace = f2fs_kvmalloc(F2FS_I_SB(cc->inode),
>>>>>>> 					workspace_size, GFP_NOFS);
>>>>>>> 	if (!workspace)
>>>>>>> 		return -ENOMEM;
>>>>>>> -	stream = ZSTD_initCStream(params, 0, workspace, workspace_size);
>>>>>>> -	if (!stream) {
>>>>>>> -		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_initCStream failed\n",
>>>>>>> +	ctx = ZSTD_initStaticCCtx(workspace, workspace_size);
>>>>>>> +	if (!ctx) {
>>>>>>> +		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_inittaticCStream failed\n",
>>>>>>> 				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
>>>>>>> 				__func__);
>>>>>>> 		kvfree(workspace);
>>>>>>> @@ -320,7 +321,7 @@ static int zstd_init_compress_ctx(struct compress_ctx *cc)
>>>>>>> 	}
>>>>>>>   	cc->private = workspace;
>>>>>>> -	cc->private2 = stream;
>>>>>>> +	cc->private2 = ctx;
>>>>>>>   	cc->clen = cc->rlen - PAGE_SIZE - COMPRESS_HEADER_SIZE;
>>>>>>> 	return 0;
>>>>>>> @@ -335,65 +336,48 @@ static void zstd_destroy_compress_ctx(struct compress_ctx *cc)
>>>>>>>   static int zstd_compress_pages(struct compress_ctx *cc)
>>>>>>> {
>>>>>>> -	ZSTD_CStream *stream = cc->private2;
>>>>>>> -	ZSTD_inBuffer inbuf;
>>>>>>> -	ZSTD_outBuffer outbuf;
>>>>>>> -	int src_size = cc->rlen;
>>>>>>> -	int dst_size = src_size - PAGE_SIZE - COMPRESS_HEADER_SIZE;
>>>>>>> -	int ret;
>>>>>>> -
>>>>>>> -	inbuf.pos = 0;
>>>>>>> -	inbuf.src = cc->rbuf;
>>>>>>> -	inbuf.size = src_size;
>>>>>>> -
>>>>>>> -	outbuf.pos = 0;
>>>>>>> -	outbuf.dst = cc->cbuf->cdata;
>>>>>>> -	outbuf.size = dst_size;
>>>>>>> -
>>>>>>> -	ret = ZSTD_compressStream(stream, &outbuf, &inbuf);
>>>>>>> -	if (ZSTD_isError(ret)) {
>>>>>>> -		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_compressStream failed, ret: %d\n",
>>>>>>> -				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
>>>>>>> -				__func__, ZSTD_getErrorCode(ret));
>>>>>>> -		return -EIO;
>>>>>>> -	}
>>>>>>> -
>>>>>>> -	ret = ZSTD_endStream(stream, &outbuf);
>>>>>>> +	ZSTD_CCtx *ctx = cc->private2;
>>>>>>> +	const size_t src_size = cc->rlen;
>>>>>>> +	const size_t dst_size = src_size - PAGE_SIZE - COMPRESS_HEADER_SIZE;
>>>>>>> +	ZSTD_parameters params = ZSTD_getParams(F2FS_ZSTD_DEFAULT_CLEVEL, src_size, 0);
>>>>>>> +	size_t ret;
>>>>>>> +
>>>>>>> +	ret = ZSTD_compress_advanced(
>>>>>>> +			ctx, cc->cbuf->cdata, dst_size, cc->rbuf, src_size, NULL, 0, params);
>>>>>>> 	if (ZSTD_isError(ret)) {
>>>>>>> -		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_endStream returned %d\n",
>>>>>>> +		/*
>>>>>>> +		 * there is compressed data remained in intermediate buffer due to
>>>>>>> +		 * no more space in cbuf.cdata
>>>>>>> +		 */
>>>>>>> +		if (ZSTD_getErrorCode(ret) == ZSTD_error_dstSize_tooSmall)
>>>>>>> +			return -EAGAIN;
>>>>>>> +		/* other compression errors return -EIO */
>>>>>>> +		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_compress_advanced failed, err: %s\n",
>>>>>>> 				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
>>>>>>> -				__func__, ZSTD_getErrorCode(ret));
>>>>>>> +				__func__, ZSTD_getErrorName(ret));
>>>>>>> 		return -EIO;
>>>>>>> 	}
>>>>>>> -	/*
>>>>>>> -	 * there is compressed data remained in intermediate buffer due to
>>>>>>> -	 * no more space in cbuf.cdata
>>>>>>> -	 */
>>>>>>> -	if (ret)
>>>>>>> -		return -EAGAIN;
>>>>>>> -
>>>>>>> -	cc->clen = outbuf.pos;
>>>>>>> +	cc->clen = ret;
>>>>>>> 	return 0;
>>>>>>> }
>>>>>>>   static int zstd_init_decompress_ctx(struct decompress_io_ctx *dic)
>>>>>>> {
>>>>>>> -	ZSTD_DStream *stream;
>>>>>>> +	ZSTD_DCtx *ctx;
>>>>>>> 	void *workspace;
>>>>>>> 	unsigned int workspace_size;
>>>>>>> -	workspace_size = ZSTD_DStreamWorkspaceBound(MAX_COMPRESS_WINDOW_SIZE);
>>>>>>> +	workspace_size = ZSTD_estimateDCtxSize();
>>>>>>>   	workspace = f2fs_kvmalloc(F2FS_I_SB(dic->inode),
>>>>>>> 					workspace_size, GFP_NOFS);
>>>>>>> 	if (!workspace)
>>>>>>> 		return -ENOMEM;
>>>>>>> -	stream = ZSTD_initDStream(MAX_COMPRESS_WINDOW_SIZE,
>>>>>>> -					workspace, workspace_size);
>>>>>>> -	if (!stream) {
>>>>>>> -		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_initDStream failed\n",
>>>>>>> +	ctx = ZSTD_initStaticDCtx(workspace, workspace_size);
>>>>>>> +	if (!ctx) {
>>>>>>> +		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_initStaticDCtx failed\n",
>>>>>>> 				KERN_ERR, F2FS_I_SB(dic->inode)->sb->s_id,
>>>>>>> 				__func__);
>>>>>>> 		kvfree(workspace);
>>>>>>> @@ -401,7 +385,7 @@ static int zstd_init_decompress_ctx(struct decompress_io_ctx *dic)
>>>>>>> 	}
>>>>>>>   	dic->private = workspace;
>>>>>>> -	dic->private2 = stream;
>>>>>>> +	dic->private2 = ctx;
>>>>>>>   	return 0;
>>>>>>> }
>>>>>>> @@ -415,28 +399,18 @@ static void zstd_destroy_decompress_ctx(struct decompress_io_ctx *dic)
>>>>>>>   static int zstd_decompress_pages(struct decompress_io_ctx *dic)
>>>>>>> {
>>>>>>> -	ZSTD_DStream *stream = dic->private2;
>>>>>>> -	ZSTD_inBuffer inbuf;
>>>>>>> -	ZSTD_outBuffer outbuf;
>>>>>>> -	int ret;
>>>>>>> -
>>>>>>> -	inbuf.pos = 0;
>>>>>>> -	inbuf.src = dic->cbuf->cdata;
>>>>>>> -	inbuf.size = dic->clen;
>>>>>>> -
>>>>>>> -	outbuf.pos = 0;
>>>>>>> -	outbuf.dst = dic->rbuf;
>>>>>>> -	outbuf.size = dic->rlen;
>>>>>>> +	ZSTD_DCtx *ctx = dic->private2;
>>>>>>> +	size_t ret;
>>>>>>> -	ret = ZSTD_decompressStream(stream, &outbuf, &inbuf);
>>>>>>> +	ret = ZSTD_decompressDCtx(ctx, dic->rbuf, dic->rlen, dic->cbuf->cdata, dic->clen);
>>>>>>> 	if (ZSTD_isError(ret)) {
>>>>>>> -		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_compressStream failed, ret: %d\n",
>>>>>>> +		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_decompressDCtx failed, err: %s\n",
>>>>>>> 				KERN_ERR, F2FS_I_SB(dic->inode)->sb->s_id,
>>>>>>> -				__func__, ZSTD_getErrorCode(ret));
>>>>>>> +				__func__, ZSTD_getErrorName(ret));
>>>>>>> 		return -EIO;
>>>>>>> 	}
>>>>>>> -	if (dic->rlen != outbuf.pos) {
>>>>>>> +	if (dic->rlen != ret) {
>>>>>>> 		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD invalid rlen:%zu, "
>>>>>>> 				"expected:%lu\n", KERN_ERR,
>>>>>>> 				F2FS_I_SB(dic->inode)->sb->s_id,


  parent reply	other threads:[~2020-09-18  5:52 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-16  3:42 [PATCH 0/9] Update to zstd-1.4.6 Nick Terrell
2020-09-16  3:42 ` [PATCH 1/9] lib: zstd: Add zstd compatibility wrapper Nick Terrell
2020-09-16  8:48   ` Christoph Hellwig
2020-09-16 20:21     ` Nick Terrell
2020-09-16  3:42 ` [PATCH 2/9] lib: zstd: Add decompress_sources.h for decompress_unzstd Nick Terrell
2020-09-16  3:42 ` [PATCH 3/9] lib: zstd: Upgrade to latest upstream zstd version 1.4.6 Nick Terrell
2020-09-16  8:01   ` kernel test robot
2020-09-16 20:53   ` Nick Terrell
2020-09-16 20:53     ` Nick Terrell
2020-09-16  3:42 ` [PATCH 4/9] crypto: zstd: Switch to zstd-1.4.6 API Nick Terrell
2020-09-16  8:49   ` Christoph Hellwig
2020-09-16  3:42 ` [PATCH 5/9] btrfs: zstd: Switch to the " Nick Terrell
2020-09-16  8:49   ` Christoph Hellwig
2020-09-16 14:20     ` Chris Mason
2020-09-16 14:30       ` Christoph Hellwig
2020-09-16 14:43         ` Chris Mason
2020-09-16 14:46           ` Christoph Hellwig
2020-09-16 15:01             ` Chris Mason
2020-09-16 18:27             ` Eric Biggers
2020-09-16 19:18             ` Nick Terrell
2020-09-17  1:35               ` Rik van Riel
2020-09-17 10:04                 ` Christoph Hellwig
2020-09-17 14:28                   ` Chris Mason
2020-09-17 17:57                     ` Nick Terrell
2020-09-16  3:43 ` [PATCH 6/9] f2fs: " Nick Terrell
2020-09-16  6:31   ` Chao Yu
2020-09-16 18:39     ` Nick Terrell
2020-09-16 18:39       ` Nick Terrell
2020-09-17  6:31       ` Chao Yu
2020-09-17 18:00         ` Nick Terrell
2020-09-17 19:34           ` Nick Terrell
2020-09-18  1:47             ` Chao Yu
2020-09-18  2:56               ` Eric Biggers
2020-09-18  2:58                 ` Chao Yu
2020-09-18  5:39               ` Nick Terrell [this message]
2020-09-18  1:41           ` Chao Yu
2020-09-16  3:43 ` [PATCH 7/9] squashfs: " Nick Terrell
2020-09-16  3:43 ` [PATCH 8/9] lib: unzstd: " Nick Terrell
2020-09-16  3:43 ` [PATCH 9/9] lib: zstd: Remove zstd compatibility wrapper Nick Terrell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6137F1A4-770E-421D-9B76-1E47A86DC38E@fb.com \
    --to=terrelln@fb.com \
    --cc=Kernel-team@fb.com \
    --cc=clm@fb.com \
    --cc=cyan@fb.com \
    --cc=jweiner@fb.com \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nickrterrell@gmail.com \
    --cc=niketa@fb.com \
    --cc=oss@malat.biz \
    --cc=yuchao0@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®