From: Len Brown <lenb@kernel.org>
To: linux-pm@lists.linux-foundation.org, linux-kernel@vger.kernel.org
Cc: Len Brown <len.brown@intel.com>,
x86@kernel.org, Kevin Hilman <khilman@deeprootsystems.com>,
Paul Mundt <lethal@linux-sh.org>
Subject: [PATCH 5/5] cpuidle: stop depending on pm_idle
Date: Wed, 03 Aug 2011 15:44:08 -0400 [thread overview]
Message-ID: <619b3f9e65307529dd4bbc98efe9d2f3b632646c.1312400543.git.len.brown@intel.com> (raw)
In-Reply-To: <1312400648-17636-1-git-send-email-lenb@kernel.org>
In-Reply-To: <8e24ed2af46a5d008d85bfeb128d25efc394a3fd.1312400543.git.len.brown@intel.com>
From: Len Brown <len.brown@intel.com>
cpuidle users should call cpuidle_call_idle() directly
rather than via (pm_idle)() function pointer.
Architecture may choose to continue using (pm_idle)(),
but cpuidle need not depend on it:
my_arch_cpu_idle()
...
if(cpuidle_call_idle())
pm_idle();
cc: x86@kernel.org
cc: Kevin Hilman <khilman@deeprootsystems.com>
cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Len Brown <len.brown@intel.com>
---
arch/arm/kernel/process.c | 4 +++-
arch/sh/kernel/idle.c | 6 ++++--
arch/x86/kernel/process_32.c | 4 +++-
arch/x86/kernel/process_64.c | 4 +++-
drivers/cpuidle/cpuidle.c | 38 ++++++++++++++++++--------------------
include/linux/cpuidle.h | 2 ++
6 files changed, 33 insertions(+), 25 deletions(-)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 5e1e541..d7ee0d4 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -30,6 +30,7 @@
#include <linux/uaccess.h>
#include <linux/random.h>
#include <linux/hw_breakpoint.h>
+#include <linux/cpuidle.h>
#include <asm/cacheflush.h>
#include <asm/leds.h>
@@ -196,7 +197,8 @@ void cpu_idle(void)
cpu_relax();
} else {
stop_critical_timings();
- pm_idle();
+ if (cpuidle_call_idle())
+ pm_idle();
start_critical_timings();
/*
* This will eventually be removed - pm_idle
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index 425d604..9c7099e 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -16,12 +16,13 @@
#include <linux/thread_info.h>
#include <linux/irqflags.h>
#include <linux/smp.h>
+#include <linux/cpuidle.h>
#include <asm/pgalloc.h>
#include <asm/system.h>
#include <asm/atomic.h>
#include <asm/smp.h>
-void (*pm_idle)(void) = NULL;
+static void (*pm_idle)(void);
static int hlt_counter;
@@ -100,7 +101,8 @@ void cpu_idle(void)
local_irq_disable();
/* Don't trace irqs off for idle */
stop_critical_timings();
- pm_idle();
+ if (cpuidle_call_idle())
+ pm_idle();
/*
* Sanity check to ensure that pm_idle() returns
* with IRQs enabled
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index a3d0dc5..7a3b651 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -38,6 +38,7 @@
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/kdebug.h>
+#include <linux/cpuidle.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -109,7 +110,8 @@ void cpu_idle(void)
local_irq_disable();
/* Don't trace irqs off for idle */
stop_critical_timings();
- pm_idle();
+ if (cpuidle_idle_call())
+ pm_idle();
start_critical_timings();
}
tick_nohz_restart_sched_tick();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ca6f7ab..f693e44 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -37,6 +37,7 @@
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/ftrace.h>
+#include <linux/cpuidle.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -136,7 +137,8 @@ void cpu_idle(void)
enter_idle();
/* Don't trace irqs off for idle */
stop_critical_timings();
- pm_idle();
+ if (cpuidle_idle_call())
+ pm_idle();
start_critical_timings();
/* In many cases the interrupt that ended idle
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 041df0b..d4c5423 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -25,10 +25,10 @@ DEFINE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
DEFINE_MUTEX(cpuidle_lock);
LIST_HEAD(cpuidle_detected_devices);
-static void (*pm_idle_old)(void);
static int enabled_devices;
static int off __read_mostly;
+static int initialized __read_mostly;
int cpuidle_disabled(void)
{
@@ -56,25 +56,23 @@ static int __cpuidle_register_device(struct cpuidle_device *dev);
* cpuidle_idle_call - the main idle loop
*
* NOTE: no locks or semaphores should be used here
+ * return non-zero on failure
*/
-static void cpuidle_idle_call(void)
+int cpuidle_idle_call(void)
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
struct cpuidle_state *target_state;
int next_state;
+ if (off)
+ return -ENODEV;
+
+ if (!initialized)
+ return -ENODEV;
+
/* check if the device is ready */
- if (!dev || !dev->enabled) {
- if (pm_idle_old)
- pm_idle_old();
- else
-#if defined(CONFIG_ARCH_HAS_DEFAULT_IDLE)
- default_idle();
-#else
- local_irq_enable();
-#endif
- return;
- }
+ if (!dev || !dev->enabled)
+ return -EBUSY;
#if 0
/* shows regressions, re-enable for 2.6.29 */
@@ -99,7 +97,7 @@ static void cpuidle_idle_call(void)
next_state = cpuidle_curr_governor->select(dev);
if (need_resched()) {
local_irq_enable();
- return;
+ return 0;
}
target_state = &dev->states[next_state];
@@ -124,6 +122,8 @@ static void cpuidle_idle_call(void)
/* give the governor an opportunity to reflect on the outcome */
if (cpuidle_curr_governor->reflect)
cpuidle_curr_governor->reflect(dev);
+
+ return 0;
}
/**
@@ -131,10 +131,10 @@ static void cpuidle_idle_call(void)
*/
void cpuidle_install_idle_handler(void)
{
- if (enabled_devices && (pm_idle != cpuidle_idle_call)) {
+ if (enabled_devices) {
/* Make sure all changes finished before we switch to new idle */
smp_wmb();
- pm_idle = cpuidle_idle_call;
+ initialized = 1;
}
}
@@ -143,8 +143,8 @@ void cpuidle_install_idle_handler(void)
*/
void cpuidle_uninstall_idle_handler(void)
{
- if (enabled_devices && pm_idle_old && (pm_idle != pm_idle_old)) {
- pm_idle = pm_idle_old;
+ if (enabled_devices) {
+ initialized = 0;
cpuidle_kick_cpus();
}
}
@@ -440,8 +440,6 @@ static int __init cpuidle_init(void)
if (cpuidle_disabled())
return -ENODEV;
- pm_idle_old = pm_idle;
-
ret = cpuidle_add_class_sysfs(&cpu_sysdev_class);
if (ret)
return ret;
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index b89f67d..b51629e 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -123,6 +123,7 @@ struct cpuidle_driver {
#ifdef CONFIG_CPU_IDLE
extern void disable_cpuidle(void);
+extern int cpuidle_idle_call(void);
extern int cpuidle_register_driver(struct cpuidle_driver *drv);
struct cpuidle_driver *cpuidle_get_driver(void);
@@ -137,6 +138,7 @@ extern void cpuidle_disable_device(struct cpuidle_device *dev);
#else
static inline void disable_cpuidle(void) { }
+static inline int cpuidle_idle_call(void) { return -ENODEV; }
static inline int cpuidle_register_driver(struct cpuidle_driver *drv)
{return -ENODEV; }
--
1.7.6.396.ge0613
next prev parent reply other threads:[~2011-08-03 19:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-03 19:44 idle patch queue for Linux 3.1 Len Brown
2011-08-03 19:44 ` [PATCH 1/5] mrst_pmu: driver for Intel Moorestown Power Management Unit Len Brown
2011-08-03 19:44 ` [PATCH 2/5] cpuidle: create bootparam "cpuidle.off=1" Len Brown
2011-08-03 19:44 ` [PATCH 3/5] cpuidle: replace xen access to x86 pm_idle and default_idle Len Brown
2011-08-03 22:35 ` H. Peter Anvin
2011-08-03 19:44 ` [PATCH 4/5] x86 idle: move mwait_idle_with_hints() to where it is used Len Brown
2011-08-03 22:36 ` H. Peter Anvin
2011-08-03 19:44 ` Len Brown [this message]
2011-08-03 22:36 ` [PATCH 5/5] cpuidle: stop depending on pm_idle H. Peter Anvin
[not found] ` <CAAXLqgrnRi25WM2HpHxe-R4ePrgdbVROky4+=3Jr489M7zbgUA@mail.gmail.com>
2011-08-05 9:48 ` [linux-pm] " Deepthi Dharwar
2011-08-05 12:18 ` [linux-pm] [PATCH 5/5] cpuidle: stop depending on pm_idle --build break Deepthi Dharwar
2011-08-03 23:04 ` [PATCH 1/5] mrst_pmu: driver for Intel Moorestown Power Management Unit H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=619b3f9e65307529dd4bbc98efe9d2f3b632646c.1312400543.git.len.brown@intel.com \
--to=lenb@kernel.org \
--cc=khilman@deeprootsystems.com \
--cc=len.brown@intel.com \
--cc=lethal@linux-sh.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®