From: "Jan Dittmer" <jdi@l4x.org>
To: linux-kernel@vger.kernel.org, eric.anholt@iintel.com, airlied@linux.ie
Subject: intel kms "Failed to allocate space for kernel memory manager"
Date: Sun, 11 Jan 2009 14:51:45 +0100 [thread overview]
Message-ID: <621d098f0901110551v5a05f69aqc4e06a6905989d6e@mail.gmail.com> (raw)
In-Reply-To: <621d098f0901110546p2b99a525k5de54e37fa181197@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2840 bytes --]
[ the xorg@fdo list requires subscription, so perhaps someone might forward it
there. It would be nice if those lists had a 'quiet' subscription
mode, ie. without
any mails. ]
Hi,
using the latest git checkout of the xf86 intel driver
(f1e9ca4e4fb3ddb083252aea79c67c5e5e71f29c),
xorg 1.5.3 and kernel 2.6.28 git head
(3d14bdad40315b54470cb7812293d14c8af2bf7d), both from
10/January, the inteldrmfb module correctly initializes the display to
its native mode (1440x900),
Lenovo X300, but X fails to start with the following error:
(WW) xf86AcquireGART: AGPIOC_ACQUIRE failed (Device or resource busy)
(EE) GARTInit: AGPIOC_INFO failed (Invalid argument)
(WW) intel(0): /dev/agpgart is either not available, or no memory is available
for allocation. Using pre-allocated memory only.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(EE) intel(0): Failed to allocate space for kernel memory manager
(==) intel(0): VideoRam: 7676 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(II) intel(0): Tiled allocation failed.
(II) intel(0): Attempting memory allocation with untiled buffers.
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(II) intel(0): Untiled allocation failed.
(II) intel(0): Couldn't allocate 3D memory, disabling DRI.
(II) intel(0): Attempting memory allocation with untiled buffers.
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(II) intel(0): Untiled allocation failed.
(EE) intel(0): Couldn't allocate video memory
The complete log and dmesg is attached.
Relevant xorg.conf entry:
Section "Device"
Identifier "Configured Video Device"
Option "RenderAccel" "on"
Option "XvMCSurface" "7"
Option "XvMC" "on"
Option "Legacy3D" "off"
EndSection
How can I fix this? As I said, the hardware is a Lenovo X300, GM965
graphics. Is this a kernel or xorg driver bug?
Thanks,
Jan
ps: Kernel Mode Setting severly lacks documentation...
--
Jan Dittmer <jdi@l4x.org>
[-- Attachment #2: Xorg.0.log.dysfunc --]
[-- Type: application/octet-stream, Size: 13222 bytes --]
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-1-686 i686 Debian
Current Operating System: Linux rubicon 2.6.28 #14 SMP Sat Jan 10 20:31:03 CET 2009 i686
Build Date: 11 November 2008 11:19:34PM
xorg-server 2:1.5.3-1 (jcristau@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 10 20:56:30 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) No Layout section. Using the default mouse configuration.
(==) No Layout section. Using the default keyboard configuration.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d12e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfa000000/0, 0xe0000000/0, I/O @ 0x00001800/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfa100000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.6.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.99.905, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.99.905, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "Legacy3D" "off"
(**) intel(0): Option "XvMC" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xFA000000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LEN", prod id 16500
(II) intel(0): found backlight control method /sys/class/backlight/thinkpad_screen
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "LEN", prod id 16500
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1440x900
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(++) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(WW) xf86AcquireGART: AGPIOC_ACQUIRE failed (Device or resource busy)
(EE) GARTInit: AGPIOC_INFO failed (Invalid argument)
(WW) intel(0): /dev/agpgart is either not available, or no memory is available
for allocation. Using pre-allocated memory only.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(EE) intel(0): Failed to allocate space for kernel memory manager
(==) intel(0): VideoRam: 7676 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(II) intel(0): Tiled allocation failed.
(II) intel(0): Attempting memory allocation with untiled buffers.
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(II) intel(0): Untiled allocation failed.
(II) intel(0): Couldn't allocate 3D memory, disabling DRI.
(II) intel(0): Attempting memory allocation with untiled buffers.
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(II) intel(0): Untiled allocation failed.
(EE) intel(0): Couldn't allocate video memory
Fatal server error:
AddScreen/ScreenInit failed for driver 0
[-- Attachment #3: dmesg.modeset --]
[-- Type: application/octet-stream, Size: 63089 bytes --]
[ 0.000000] Linux version 2.6.28 (jdittmer@rubicon) (gcc version 4.3.2 (Debian 4.3.2-1) ) #14 SMP Sat Jan 10 20:31:03 CET 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007d6c0000 (usable)
[ 0.000000] BIOS-e820: 000000007d6c0000 - 000000007d6cc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007d700000 - 000000007e000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7d6c0 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-d000
[ 0.000000] ACPI: RSDP 000F6A80, 0024 (r2 LENOVO)
[ 0.000000] ACPI: XSDT 7D6C0D35, 0094 (r1 LENOVO TP-7T 1021 LTP 0)
[ 0.000000] ACPI: FACP 7D6C0E00, 00F4 (r3 LENOVO TP-7T 1021 LNVO 1)
[ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204]
[ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204]
[ 0.000000] ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204]
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 7D6C11EC, A94C (r1 LENOVO TP-7T 1021 MSFT 3000000)
[ 0.000000] ACPI: FACS 7D6E4000, 0040
[ 0.000000] ACPI: SSDT 7D6C0FB4, 0238 (r1 LENOVO TP-7T 1021 MSFT 3000000)
[ 0.000000] ACPI: ECDT 7D6CBB38, 0052 (r1 LENOVO TP-7T 1021 LNVO 1)
[ 0.000000] ACPI: TCPA 7D6CBB8A, 0032 (r2 LENOVO TP-7T 1021 LNVO 1)
[ 0.000000] ACPI: APIC 7D6CBBBC, 0068 (r1 LENOVO TP-7T 1021 LNVO 1)
[ 0.000000] ACPI: MCFG 7D6CBC24, 003C (r1 LENOVO TP-7T 1021 LNVO 1)
[ 0.000000] ACPI: HPET 7D6CBC60, 0038 (r1 LENOVO TP-7T 1021 LNVO 1)
[ 0.000000] ACPI: SLIC 7D6CBDF0, 0176 (r1 LENOVO TP-7T 1021 LTP 0)
[ 0.000000] ACPI: BOOT 7D6CBF66, 0028 (r1 LENOVO TP-7T 1021 LTP 1)
[ 0.000000] ACPI: ASF! 7D6CBF8E, 0072 (r16 LENOVO TP-7T 1021 PTL 1)
[ 0.000000] ACPI: SSDT 7D6E2655, 025F (r1 LENOVO TP-7T 1021 INTL 20050513)
[ 0.000000] ACPI: SSDT 7D6E28B4, 00A6 (r1 LENOVO TP-7T 1021 INTL 20050513)
[ 0.000000] ACPI: SSDT 7D6E295A, 04F7 (r1 LENOVO TP-7T 1021 INTL 20050513)
[ 0.000000] ACPI: SSDT 7D6E2E51, 01D8 (r1 LENOVO TP-7T 1021 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1118MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00009000 - 0000ff00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000200000 - 0000e87a28] TEXT DATA BSS ==> [0000200000 - 0000e87a28]
[ 0.000000] #4 [0000e88000 - 0000e8d000] INIT_PG_TABLE ==> [0000e88000 - 0000e8d000]
[ 0.000000] #5 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f6ab0] 000f6ab0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007d6c0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007d6c0
[ 0.000000] On node 0 totalpages: 513629
[ 0.000000] free_area_init_node: node 0, pgdat c087ae00, node_mem_map c1000000
[ 0.000000] DMA zone: 60 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3937 pages, LIFO batch:0
[ 0.000000] Normal zone: 3270 pages used for memmap
[ 0.000000] Normal zone: 219960 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4196 pages used for memmap
[ 0.000000] HighMem zone: 282206 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 1347584 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 506103
[ 0.000000] Kernel command line: root=/dev/sda3 ro usbcore.autosuspend=1 thinkpad_acpi.fan_control=1 thinkpad_acpi.experimental=1 thinkpad_acpi.brightness_enable=1 thinkpad_acpi.brightness_mode=0 i915.modeset=1
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 1197.002 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000999] ... MAX_LOCK_DEPTH: 48
[ 0.000999] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000999] ... CLASSHASH_SIZE: 4096
[ 0.000999] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.000999] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.000999] ... CHAINHASH_SIZE: 8192
[ 0.000999] memory used by lock dependency info: 2591 kB
[ 0.000999] per task-struct memory footprint: 1920 bytes
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Memory: 2006996k/2054912k available (4209k kernel code, 46636k reserved, 2551k data, 1592k init, 1145608k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfff85000 - 0xfffff000 ( 488 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000999] .init : 0xc08a4000 - 0xc0a32000 (1592 kB)
[ 0.000999] .data : 0xc061c7e5 - 0xc089a650 (2551 kB)
[ 0.000999] .text : 0xc0200000 - 0xc061c7e5 (4209 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.00 BogoMIPS (lpj=1197002)
[ 0.000999] Mount-cache hash table entries: 512
[ 0.002098] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002326] CPU: L2 cache: 4096K
[ 0.002462] [ds] using core 2 configuration
[ 0.002599] CPU: Physical Processor ID: 0
[ 0.002736] CPU: Processor Core ID: 0
[ 0.002874] using mwait in idle threads.
[ 0.003032] Checking 'hlt' instruction... OK.
[ 0.008378] ACPI: Core revision 20081204
[ 0.066545] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076711] CPU0: Intel(R) Core(TM)2 Duo CPU L7100 @ 1.20GHz stepping 0b
[ 0.078968] lockdep: fixing up alternatives.
[ 0.079172] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 2393.92 BogoMIPS (lpj=1196962)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 4096K
[ 0.000999] [ds] using core 2 configuration
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.153912] CPU1: Intel(R) Core(TM)2 Duo CPU L7100 @ 1.20GHz stepping 0b
[ 0.154227] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.154976] Measured 195576 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.154976] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.155082] Brought up 2 CPUs
[ 0.155219] Total of 2 processors activated (4787.92 BogoMIPS).
[ 0.157562] khelper used greatest stack depth: 7040 bytes left
[ 0.158465] net_namespace: 1172 bytes
[ 0.159610] Time: 20:53:32 Date: 01/10/09
[ 0.160076] NET: Registered protocol family 16
[ 0.163016] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.163220] ACPI: bus type pci registered
[ 0.164037] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.164184] PCI: MCFG area at f0000000 reserved in E820
[ 0.164322] PCI: Using MMCONFIG for extended config space
[ 0.164462] PCI: Using configuration type 1 for base access
[ 0.206456] bio: create slab <bio-0> at 0
[ 0.223769] ACPI: EC: EC description table is found, configuring boot EC
[ 0.260819] ACPI: BIOS _OSI(Linux) query ignored
[ 0.268039] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.277793] ACPI: Interpreter enabled
[ 0.277932] ACPI: (supports S0 S3 S4 S5)
[ 0.278474] ACPI: Using IOAPIC for interrupt routing
[ 0.330595] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
[ 0.330739] ACPI: EC: driver started in interrupt mode
[ 0.334061] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.335230] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.336175] pci 0000:00:02.0: reg 10 64bit mmio: [0xfa000000-0xfa0fffff]
[ 0.336212] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[ 0.336233] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.336458] pci 0000:00:02.1: reg 10 64bit mmio: [0xfa100000-0xfa1fffff]
[ 0.336970] pci 0000:00:19.0: reg 10 32bit mmio: [0xfa200000-0xfa21ffff]
[ 0.337014] pci 0000:00:19.0: reg 14 32bit mmio: [0xfa225000-0xfa225fff]
[ 0.337046] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
[ 0.337274] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.337430] pci 0000:00:19.0: PME# disabled
[ 0.337797] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
[ 0.338099] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
[ 0.338370] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfa426c00-0xfa426fff]
[ 0.338624] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.338781] pci 0000:00:1a.7: PME# disabled
[ 0.339158] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfa220000-0xfa223fff]
[ 0.339433] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.339588] pci 0000:00:1b.0: PME# disabled
[ 0.340109] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.340264] pci 0000:00:1c.0: PME# disabled
[ 0.340795] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.340950] pci 0000:00:1c.1: PME# disabled
[ 0.341394] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.341549] pci 0000:00:1c.2: PME# disabled
[ 0.342078] pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
[ 0.342363] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
[ 0.342648] pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.342951] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfa427000-0xfa4273ff]
[ 0.343243] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.343398] pci 0000:00:1d.7: PME# disabled
[ 0.344221] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.344411] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.344562] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.344748] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.345144] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.345176] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.345206] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.345237] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.345269] pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f]
[ 0.345590] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57]
[ 0.345621] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47]
[ 0.345652] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f]
[ 0.345684] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43]
[ 0.345715] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
[ 0.345747] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfa426000-0xfa4267ff]
[ 0.345937] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.346019] pci 0000:00:1f.2: PME# disabled
[ 0.346297] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfa427400-0xfa4274ff]
[ 0.346407] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
[ 0.346784] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.346802] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.346835] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfa500000-0xfa5fffff]
[ 0.347326] pci 0000:03:00.0: reg 10 64bit mmio: [0xf9f00000-0xf9f01fff]
[ 0.347813] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.347987] pci 0000:03:00.0: PME# disabled
[ 0.348358] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.348377] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
[ 0.348409] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfa600000-0xfa6fffff]
[ 0.348669] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
[ 0.348688] pci 0000:00:1c.2: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 0.348719] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfa700000-0xfa7fffff]
[ 0.349125] pci 0000:00:1e.0: transparent bridge
[ 0.349429] pci_bus 0000:00: on NUMA node 0
[ 0.349452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.350200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.350463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.350721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.350979] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.385353] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.387082] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.388783] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.390507] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.392236] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.393870] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.395652] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.397373] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.399189] ACPI: Power Resource [PUBS] (on)
[ 0.402126] SCSI subsystem initialized
[ 0.402203] libata version 3.00 loaded.
[ 0.403118] usbcore: registered new interface driver usbfs
[ 0.403526] usbcore: registered new interface driver hub
[ 0.404135] usbcore: registered new device driver usb
[ 0.405152] PCI: Using ACPI for IRQ routing
[ 0.409037] Bluetooth: Core ver 2.14
[ 0.409224] NET: Registered protocol family 31
[ 0.409224] Bluetooth: HCI device and connection manager initialized
[ 0.409348] Bluetooth: HCI socket layer initialized
[ 0.411178] cfg80211: Calling CRDA to update world regulatory domain
[ 0.411256] cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition
[ 0.411323] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.412406] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.414074] Switched to high resolution mode on CPU 0
[ 0.414828] Switched to high resolution mode on CPU 1
[ 0.415066] pnp: PnP ACPI init
[ 0.415261] ACPI: bus type pnp registered
[ 0.428498] pnp: PnP ACPI: found 11 devices
[ 0.428640] ACPI: ACPI bus type pnp unregistered
[ 0.428825] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.428971] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.429126] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.429306] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.429451] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.429598] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.429743] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.429891] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.430039] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.430187] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.430365] system 00:00: iomem range 0x100000-0x7dffffff could not be reserved
[ 0.430550] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.430733] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
[ 0.430950] system 00:02: ioport range 0x164e-0x164f has been reserved
[ 0.431114] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.431291] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.431437] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.431581] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.431728] system 00:02: ioport range 0x1600-0x165f could not be reserved
[ 0.431875] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.432024] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.432173] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.432352] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.432500] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.432648] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
[ 0.470968] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.471128] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.471315] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.471472] pci 0000:00:1c.0: PREFETCH window: 0x000000fa500000-0x000000fa5fffff
[ 0.471680] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.471829] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.471988] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
[ 0.472144] pci 0000:00:1c.1: PREFETCH window: 0x000000fa600000-0x000000fa6fffff
[ 0.472374] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.472522] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.472681] pci 0000:00:1c.2: MEM window: 0xf6000000-0xf7ffffff
[ 0.472836] pci 0000:00:1c.2: PREFETCH window: 0x000000fa700000-0x000000fa7fffff
[ 0.473045] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d
[ 0.473186] pci 0000:00:1e.0: IO window: disabled
[ 0.473367] pci 0000:00:1e.0: MEM window: disabled
[ 0.473516] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.473709] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.473864] pci 0000:00:1c.0: setting latency timer to 64
[ 0.473895] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.474054] pci 0000:00:1c.1: setting latency timer to 64
[ 0.474084] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.474241] pci 0000:00:1c.2: setting latency timer to 64
[ 0.474301] pci 0000:00:1e.0: setting latency timer to 64
[ 0.474315] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.474321] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.474327] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.474333] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf5ffffff]
[ 0.474339] pci_bus 0000:02: resource 2 mem: [0xfa500000-0xfa5fffff]
[ 0.474344] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.474349] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
[ 0.474354] pci_bus 0000:03: resource 1 mem: [0xf8000000-0xf9ffffff]
[ 0.474360] pci_bus 0000:03: resource 2 mem: [0xfa600000-0xfa6fffff]
[ 0.474365] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.474370] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
[ 0.474376] pci_bus 0000:04: resource 1 mem: [0xf6000000-0xf7ffffff]
[ 0.474382] pci_bus 0000:04: resource 2 mem: [0xfa700000-0xfa7fffff]
[ 0.474387] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.474391] pci_bus 0000:0d: resource 0 mem: [0x0-0x0]
[ 0.474397] pci_bus 0000:0d: resource 1 mem: [0x0-0x0]
[ 0.474401] pci_bus 0000:0d: resource 2 mem: [0x0-0x0]
[ 0.474406] pci_bus 0000:0d: resource 3 io: [0x00-0xffff]
[ 0.474411] pci_bus 0000:0d: resource 4 mem: [0x000000-0xffffffff]
[ 0.474583] NET: Registered protocol family 2
[ 0.477673] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.479992] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.481509] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
[ 0.500234] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.500451] TCP reno registered
[ 0.501661] NET: Registered protocol family 1
[ 0.502589] Simple Boot Flag at 0x35 set to 0x1
[ 0.509612] audit: initializing netlink socket (disabled)
[ 0.509813] type=2000 audit(1231620812.509:1): initialized
[ 0.510938] highmem bounce pool size: 64 pages
[ 0.535304] NTFS driver 2.1.29 [Flags: R/O].
[ 0.536725] msgmni has been set to 1684
[ 0.538309] cryptomgr_test used greatest stack depth: 6760 bytes left
[ 0.540183] alg: No test for stdrng (krng)
[ 0.540466] alg: No test for stdrng (ansi_cprng)
[ 0.541333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.541541] io scheduler noop registered
[ 0.541724] io scheduler cfq registered (default)
[ 0.541901] pci 0000:00:02.0: Boot video device
[ 0.543158] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.544412] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.545609] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.548878] ACPI: AC Adapter [AC] (on-line)
[ 0.595023] ACPI: Battery Slot [BAT0] (battery present)
[ 0.647519] ACPI: Battery Slot [BAT1] (battery present)
[ 0.648762] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.649006] ACPI: Power Button (FF) [PWRF]
[ 0.649781] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.655480] ACPI: Lid Switch [LID]
[ 0.656109] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.656307] ACPI: Sleep Button (CM) [SLPB]
[ 0.658767] ACPI: SSDT 7D6E1B32, 0240 (r1 PmRef Cpu0Ist 100 INTL 20050513)
[ 0.663966] ACPI: SSDT 7D6E1DF7, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513)
[ 0.680350] Monitor-Mwait will be used to enter C-1 state
[ 0.680456] Monitor-Mwait will be used to enter C-2 state
[ 0.680500] Monitor-Mwait will be used to enter C-3 state
[ 0.680962] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.681949] processor ACPI_CPU:00: registered as cooling_device0
[ 0.682140] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.683718] ACPI: SSDT 7D6E1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
[ 0.688875] ACPI: SSDT 7D6E1D72, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
[ 0.697344] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.698152] processor ACPI_CPU:01: registered as cooling_device1
[ 0.698312] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.711981] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.716625] ACPI: Thermal Zone [THM0] (52 C)
[ 0.719832] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.722932] ACPI: Thermal Zone [THM1] (50 C)
[ 0.744949] Non-volatile memory driver v1.3
[ 0.746395] Linux agpgart interface v0.103
[ 0.746909] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.750226] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 0.756903] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.757620] [drm] Initialized drm 1.1.0 20060810
[ 0.758500] pci 0000:00:02.0: power state changed by ACPI to D0
[ 0.758670] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.758823] pci 0000:00:02.0: setting latency timer to 64
[ 0.984147] ------------[ cut here ]------------
[ 0.984316] WARNING: at drivers/gpu/drm/drm_crtc.c:213 drm_mode_object_get+0x36/0x8e()
[ 0.984492] Hardware name: 647814G
[ 0.984624] drm_mode_object_get called w/o mode_config lock
[ 0.984764] Modules linked in:
[ 0.984984] Pid: 1, comm: swapper Not tainted 2.6.28 #14
[ 0.985128] Call Trace:
[ 0.985297] [<c02238f8>] warn_slowpath+0x80/0xb6
[ 0.985440] [<c061b2bc>] _spin_unlock_irq+0x20/0x23
[ 0.985583] [<c0220809>] finish_task_switch+0x41/0x92
[ 0.985726] [<c061b88d>] __reacquire_kernel_lock+0x21/0x28
[ 0.985868] [<c022b75c>] lock_timer_base+0x19/0x35
[ 0.986008] [<c061b2f3>] _spin_unlock_irqrestore+0x34/0x39
[ 0.986159] [<c0240ebb>] trace_hardirqs_on_caller+0x10e/0x135
[ 0.986335] [<c022b7bc>] try_to_del_timer_sync+0x44/0x4a
[ 0.986477] [<c022b7cc>] del_timer_sync+0xa/0x14
[ 0.986616] [<c0619639>] schedule_timeout+0xa6/0xbb
[ 0.986757] [<c03d8b80>] drm_mode_object_get+0x36/0x8e
[ 0.986900] [<c03d8cac>] drm_mode_connector_update_edid_property+0xd4/0x144
[ 0.987047] [<c03e9468>] intel_ddc_get_modes+0x24/0x3c
[ 0.987188] [<c03e7c57>] intel_lvds_init+0xdd/0x26a
[ 0.987357] [<c03e6a6f>] intel_modeset_init+0x307/0x5ce
[ 0.987502] [<c03dea4f>] i915_driver_irq_postinstall+0xa8/0xac
[ 0.987646] [<c03dd967>] i915_driver_load+0x6e5/0x734
[ 0.987788] [<c03d5a1d>] drm_get_dev+0x2e9/0x383
[ 0.987928] [<c03d1921>] drm_init+0x5a/0x89
[ 0.988092] [<c08be6e1>] i915_init+0x0/0x43
[ 0.988232] [<c020112c>] _stext+0x44/0x10d
[ 0.988403] [<c025b1b8>] register_irq_proc+0x79/0x92
[ 0.988547] [<c08a4297>] kernel_init+0x101/0x14f
[ 0.988686] [<c08a4196>] kernel_init+0x0/0x14f
[ 0.988827] [<c02035f3>] kernel_thread_helper+0x7/0x10
[ 0.988981] ---[ end trace 6ffd5393b57809fa ]---
[ 0.989126] ------------[ cut here ]------------
[ 0.989289] WARNING: at drivers/gpu/drm/drm_crtc.c:213 drm_mode_object_get+0x36/0x8e()
[ 0.989469] Hardware name: 647814G
[ 0.989601] drm_mode_object_get called w/o mode_config lock
[ 0.989739] Modules linked in:
[ 0.989963] Pid: 1, comm: swapper Tainted: G W 2.6.28 #14
[ 0.990122] Call Trace:
[ 0.990283] [<c02238f8>] warn_slowpath+0x80/0xb6
[ 0.990425] [<c0223913>] warn_slowpath+0x9b/0xb6
[ 0.990567] [<c061b2bc>] _spin_unlock_irq+0x20/0x23
[ 0.990709] [<c0220809>] finish_task_switch+0x41/0x92
[ 0.990851] [<c061b88d>] __reacquire_kernel_lock+0x21/0x28
[ 0.990992] [<c022b75c>] lock_timer_base+0x19/0x35
[ 0.991135] [<c0364779>] idr_get_empty_slot+0x145/0x202
[ 0.991302] [<c03d8b80>] drm_mode_object_get+0x36/0x8e
[ 0.991446] [<c03d8d44>] drm_mode_create+0x28/0x2d
[ 0.991587] [<c03dc4a7>] drm_add_edid_modes+0x218/0x5ce
[ 0.991731] [<c03d8cac>] drm_mode_connector_update_edid_property+0xd4/0x144
[ 0.991878] [<c03e9471>] intel_ddc_get_modes+0x2d/0x3c
[ 0.992020] [<c03e7c57>] intel_lvds_init+0xdd/0x26a
[ 0.992157] [<c03e6a6f>] intel_modeset_init+0x307/0x5ce
[ 0.992321] [<c03dea4f>] i915_driver_irq_postinstall+0xa8/0xac
[ 0.992465] [<c03dd967>] i915_driver_load+0x6e5/0x734
[ 0.992608] [<c03d5a1d>] drm_get_dev+0x2e9/0x383
[ 0.992747] [<c03d1921>] drm_init+0x5a/0x89
[ 0.992886] [<c08be6e1>] i915_init+0x0/0x43
[ 0.993028] [<c020112c>] _stext+0x44/0x10d
[ 0.993168] [<c025b1b8>] register_irq_proc+0x79/0x92
[ 0.993334] [<c08a4297>] kernel_init+0x101/0x14f
[ 0.993472] [<c08a4196>] kernel_init+0x0/0x14f
[ 0.993612] [<c02035f3>] kernel_thread_helper+0x7/0x10
[ 0.993751] ---[ end trace 6ffd5393b57809fb ]---
[ 0.993894] ------------[ cut here ]------------
[ 0.994034] WARNING: at drivers/gpu/drm/drm_crtc.c:213 drm_mode_object_get+0x36/0x8e()
[ 0.994213] Hardware name: 647814G
[ 0.994372] drm_mode_object_get called w/o mode_config lock
[ 0.994512] Modules linked in:
[ 0.994737] Pid: 1, comm: swapper Tainted: G W 2.6.28 #14
[ 0.994878] Call Trace:
[ 0.995013] [<c02238f8>] warn_slowpath+0x80/0xb6
[ 0.995157] [<c0223913>] warn_slowpath+0x9b/0xb6
[ 0.995323] [<c061b2bc>] _spin_unlock_irq+0x20/0x23
[ 0.995465] [<c0220809>] finish_task_switch+0x41/0x92
[ 0.995607] [<c061b88d>] __reacquire_kernel_lock+0x21/0x28
[ 0.995752] [<c0364779>] idr_get_empty_slot+0x145/0x202
[ 0.995895] [<c03649c7>] idr_get_new_above_int+0x10/0x5a
[ 0.996039] [<c0364779>] idr_get_empty_slot+0x145/0x202
[ 0.996177] [<c03d8b80>] drm_mode_object_get+0x36/0x8e
[ 0.996343] [<c03d8d44>] drm_mode_create+0x28/0x2d
[ 0.996485] [<c03dc4a7>] drm_add_edid_modes+0x218/0x5ce
[ 0.996628] [<c03d8cac>] drm_mode_connector_update_edid_property+0xd4/0x144
[ 0.996773] [<c03e9471>] intel_ddc_get_modes+0x2d/0x3c
[ 0.996915] [<c03e7c57>] intel_lvds_init+0xdd/0x26a
[ 0.997073] [<c03e6a6f>] intel_modeset_init+0x307/0x5ce
[ 0.997215] [<c03dea4f>] i915_driver_irq_postinstall+0xa8/0xac
[ 0.997382] [<c03dd967>] i915_driver_load+0x6e5/0x734
[ 0.997522] [<c03d5a1d>] drm_get_dev+0x2e9/0x383
[ 0.997662] [<c03d1921>] drm_init+0x5a/0x89
[ 0.997802] [<c08be6e1>] i915_init+0x0/0x43
[ 0.997941] [<c020112c>] _stext+0x44/0x10d
[ 0.998105] [<c025b1b8>] register_irq_proc+0x79/0x92
[ 0.998246] [<c08a4297>] kernel_init+0x101/0x14f
[ 0.998411] [<c08a4196>] kernel_init+0x0/0x14f
[ 0.998549] [<c02035f3>] kernel_thread_helper+0x7/0x10
[ 0.998687] ---[ end trace 6ffd5393b57809fc ]---
[ 1.021132] i2c-adapter i2c-2: sendbytes: NAK bailout.
[ 1.299131] ------------[ cut here ]------------
[ 1.299295] WARNING: at drivers/gpu/drm/drm_crtc.c:213 drm_mode_object_get+0x36/0x8e()
[ 1.299479] Hardware name: 647814G
[ 1.299614] drm_mode_object_get called w/o mode_config lock
[ 1.299754] Modules linked in:
[ 1.299981] Pid: 1, comm: swapper Tainted: G W 2.6.28 #14
[ 1.300124] Call Trace:
[ 1.300285] [<c02238f8>] warn_slowpath+0x80/0xb6
[ 1.300426] [<c02207c8>] finish_task_switch+0x0/0x92
[ 1.300571] [<c061b88d>] __reacquire_kernel_lock+0x21/0x28
[ 1.300715] [<c0282c2d>] add_partial+0xe/0x44
[ 1.300855] [<c0282c2d>] add_partial+0xe/0x44
[ 1.300995] [<c061b420>] _spin_lock+0x23/0x49
[ 1.301135] [<c061b30c>] _spin_unlock+0x14/0x1c
[ 1.301300] [<c02837b0>] __slab_free+0x6b/0x274
[ 1.301442] [<c03d8c1f>] drm_mode_connector_update_edid_property+0x47/0x144
[ 1.301589] [<c03d8b80>] drm_mode_object_get+0x36/0x8e
[ 1.301733] [<c03d8cac>] drm_mode_connector_update_edid_property+0xd4/0x144
[ 1.301881] [<c03e9468>] intel_ddc_get_modes+0x24/0x3c
[ 1.302026] [<c03e79a8>] intel_lvds_get_modes+0x13/0x7c
[ 1.302170] [<c03db72a>] drm_helper_probe_single_connector_modes+0xa7/0x1d8
[ 1.302343] [<c03db882>] drm_helper_probe_connector_modes+0x27/0x4c
[ 1.302489] [<c03db8e3>] drm_helper_plugged_event+0x3c/0x272
[ 1.302633] [<c03e6c42>] intel_modeset_init+0x4da/0x5ce
[ 1.302777] [<c03dbb26>] drm_helper_initial_config+0x5/0xb
[ 1.302921] [<c03dd970>] i915_driver_load+0x6ee/0x734
[ 1.303087] [<c03d5a1d>] drm_get_dev+0x2e9/0x383
[ 1.303228] [<c03d1921>] drm_init+0x5a/0x89
[ 1.303392] [<c08be6e1>] i915_init+0x0/0x43
[ 1.303529] [<c020112c>] _stext+0x44/0x10d
[ 1.303672] [<c025b1b8>] register_irq_proc+0x79/0x92
[ 1.303815] [<c08a4297>] kernel_init+0x101/0x14f
[ 1.303956] [<c08a4196>] kernel_init+0x0/0x14f
[ 1.304111] [<c02035f3>] kernel_thread_helper+0x7/0x10
[ 1.304275] ---[ end trace 6ffd5393b57809fd ]---
[ 1.304419] ------------[ cut here ]------------
[ 1.304556] WARNING: at drivers/gpu/drm/drm_crtc.c:213 drm_mode_object_get+0x36/0x8e()
[ 1.304736] Hardware name: 647814G
[ 1.304870] drm_mode_object_get called w/o mode_config lock
[ 1.305010] Modules linked in:
[ 1.305236] Pid: 1, comm: swapper Tainted: G W 2.6.28 #14
[ 1.305392] Call Trace:
[ 1.305529] [<c02238f8>] warn_slowpath+0x80/0xb6
[ 1.305672] [<c0223913>] warn_slowpath+0x9b/0xb6
[ 1.305814] [<c02207c8>] finish_task_switch+0x0/0x92
[ 1.305955] [<c0364779>] idr_get_empty_slot+0x145/0x202
[ 1.306113] [<c03d8b80>] drm_mode_object_get+0x36/0x8e
[ 1.306279] [<c03d8d44>] drm_mode_create+0x28/0x2d
[ 1.306421] [<c03dc4a7>] drm_add_edid_modes+0x218/0x5ce
[ 1.306565] [<c03d8cac>] drm_mode_connector_update_edid_property+0xd4/0x144
[ 1.306710] [<c03e9471>] intel_ddc_get_modes+0x2d/0x3c
[ 1.306853] [<c03e79a8>] intel_lvds_get_modes+0x13/0x7c
[ 1.306997] [<c03db72a>] drm_helper_probe_single_connector_modes+0xa7/0x1d8
[ 1.307149] [<c03db882>] drm_helper_probe_connector_modes+0x27/0x4c
[ 1.307317] [<c03db8e3>] drm_helper_plugged_event+0x3c/0x272
[ 1.307461] [<c03e6c42>] intel_modeset_init+0x4da/0x5ce
[ 1.307605] [<c03dbb26>] drm_helper_initial_config+0x5/0xb
[ 1.307750] [<c03dd970>] i915_driver_load+0x6ee/0x734
[ 1.307891] [<c03d5a1d>] drm_get_dev+0x2e9/0x383
[ 1.308035] [<c03d1921>] drm_init+0x5a/0x89
[ 1.308174] [<c08be6e1>] i915_init+0x0/0x43
[ 1.308338] [<c020112c>] _stext+0x44/0x10d
[ 1.308478] [<c025b1b8>] register_irq_proc+0x79/0x92
[ 1.308620] [<c08a4297>] kernel_init+0x101/0x14f
[ 1.308761] [<c08a4196>] kernel_init+0x0/0x14f
[ 1.308902] [<c02035f3>] kernel_thread_helper+0x7/0x10
[ 1.309042] ---[ end trace 6ffd5393b57809fe ]---
[ 1.309183] ------------[ cut here ]------------
[ 1.310139] WARNING: at drivers/gpu/drm/drm_crtc.c:213 drm_mode_object_get+0x36/0x8e()
[ 1.310336] Hardware name: 647814G
[ 1.310469] drm_mode_object_get called w/o mode_config lock
[ 1.310609] Modules linked in:
[ 1.310833] Pid: 1, comm: swapper Tainted: G W 2.6.28 #14
[ 1.310975] Call Trace:
[ 1.311111] [<c02238f8>] warn_slowpath+0x80/0xb6
[ 1.311278] [<c0223913>] warn_slowpath+0x9b/0xb6
[ 1.311418] [<c02207c8>] finish_task_switch+0x0/0x92
[ 1.311561] [<c0364779>] idr_get_empty_slot+0x145/0x202
[ 1.311701] [<c03649c7>] idr_get_new_above_int+0x10/0x5a
[ 1.311844] [<c0364779>] idr_get_empty_slot+0x145/0x202
[ 1.311986] [<c03d8b80>] drm_mode_object_get+0x36/0x8e
[ 1.312125] [<c03d8d44>] drm_mode_create+0x28/0x2d
[ 1.312290] [<c03dc4a7>] drm_add_edid_modes+0x218/0x5ce
[ 1.312434] [<c03d8cac>] drm_mode_connector_update_edid_property+0xd4/0x144
[ 1.312581] [<c03e9471>] intel_ddc_get_modes+0x2d/0x3c
[ 1.312723] [<c03e79a8>] intel_lvds_get_modes+0x13/0x7c
[ 1.312868] [<c03db72a>] drm_helper_probe_single_connector_modes+0xa7/0x1d8
[ 1.313016] [<c03db882>] drm_helper_probe_connector_modes+0x27/0x4c
[ 1.313159] [<c03db8e3>] drm_helper_plugged_event+0x3c/0x272
[ 1.313324] [<c03e6c42>] intel_modeset_init+0x4da/0x5ce
[ 1.313467] [<c03dbb26>] drm_helper_initial_config+0x5/0xb
[ 1.313612] [<c03dd970>] i915_driver_load+0x6ee/0x734
[ 1.313754] [<c03d5a1d>] drm_get_dev+0x2e9/0x383
[ 1.313895] [<c03d1921>] drm_init+0x5a/0x89
[ 1.314035] [<c08be6e1>] i915_init+0x0/0x43
[ 1.314175] [<c020112c>] _stext+0x44/0x10d
[ 1.314339] [<c025b1b8>] register_irq_proc+0x79/0x92
[ 1.314481] [<c08a4297>] kernel_init+0x101/0x14f
[ 1.314621] [<c08a4196>] kernel_init+0x0/0x14f
[ 1.314762] [<c02035f3>] kernel_thread_helper+0x7/0x10
[ 1.314902] ---[ end trace 6ffd5393b57809ff ]---
[ 1.329993] ------------[ cut here ]------------
[ 1.330146] WARNING: at drivers/gpu/drm/drm_crtc.c:213 drm_mode_object_get+0x36/0x8e()
[ 1.330353] Hardware name: 647814G
[ 1.330486] drm_mode_object_get called w/o mode_config lock
[ 1.330626] Modules linked in:
[ 1.330852] Pid: 1, comm: swapper Tainted: G W 2.6.28 #14
[ 1.330990] Call Trace:
[ 1.331129] [<c02238f8>] warn_slowpath+0x80/0xb6
[ 1.331296] [<c022b169>] run_timer_softirq+0x30/0x19b
[ 1.331438] [<c022b169>] run_timer_softirq+0x30/0x19b
[ 1.331584] [<c061b2bc>] _spin_unlock_irq+0x20/0x23
[ 1.331726] [<c022b2cc>] run_timer_softirq+0x193/0x19b
[ 1.331868] [<c0227f3d>] __do_softirq+0xe2/0x13b
[ 1.332006] [<c0227e4c>] _local_bh_enable+0x7d/0x8c
[ 1.332152] [<c0369838>] trace_hardirqs_on_thunk+0xc/0x10
[ 1.332319] [<c0202e74>] restore_nocheck_notrace+0x0/0xe
[ 1.332460] [<c03d8b80>] drm_mode_object_get+0x36/0x8e
[ 1.332603] [<c03d8f67>] drm_framebuffer_init+0x16/0x4b
[ 1.332747] [<c03e6d6c>] intel_framebuffer_create+0x36/0x71
[ 1.332889] [<c03e9fa7>] intelfb_create+0x188/0x56f
[ 1.333032] [<c03ea6be>] intelfb_probe+0x330/0x50b
[ 1.333174] [<c03db84e>] drm_helper_probe_single_connector_modes+0x1cb/0x1d8
[ 1.333339] [<c03dbb0f>] drm_helper_plugged_event+0x268/0x272
[ 1.333483] [<c03dbb26>] drm_helper_initial_config+0x5/0xb
[ 1.333624] [<c03dd970>] i915_driver_load+0x6ee/0x734
[ 1.333765] [<c03d5a1d>] drm_get_dev+0x2e9/0x383
[ 1.333904] [<c03d1921>] drm_init+0x5a/0x89
[ 1.334043] [<c08be6e1>] i915_init+0x0/0x43
[ 1.334182] [<c020112c>] _stext+0x44/0x10d
[ 1.334348] [<c025b1b8>] register_irq_proc+0x79/0x92
[ 1.334491] [<c08a4297>] kernel_init+0x101/0x14f
[ 1.334631] [<c08a4196>] kernel_init+0x0/0x14f
[ 1.334765] [<c02035f3>] kernel_thread_helper+0x7/0x10
[ 1.334905] ---[ end trace 6ffd5393b5780a00 ]---
[ 1.336019] allocated 1440x900 fb: 0x007df000, bo f735fd20
[ 1.633105] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 1
[ 1.673992] [drm] LVDS-8: set mode 1440x900 d
[ 1.856584] Console: switching to colour frame buffer device 180x56
[ 1.870910] fb0: inteldrmfb frame buffer device
[ 1.871001] registered panic notifier
[ 1.871079] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 1.871306] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
[ 1.871526] intelfb: Version 0.9.6
[ 1.871680] intelfb: 00:02.0: Intel(R) 965GM, aperture size 256MB, stolen memory 7932kB
[ 1.877575] intelfb: Cannot remap FB region.
[ 1.877866] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.885081] brd: module loaded
[ 1.887756] loop: module loaded
[ 1.888051] nbd: registered device at major 43
[ 1.894282] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 1.894408] Copyright (c) 1999-2006 Intel Corporation.
[ 1.894673] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 1.894791] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.894986] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.895134] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.895370] 0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts.
[ 2.083464] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:80:6f:a5
[ 2.083613] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.083779] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: 1008ff-0ff
[ 2.084085] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
[ 2.084217] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[ 2.085719] PPP generic driver version 2.4.2
[ 2.086063] PPP Deflate Compression module registered
[ 2.086168] PPP BSD Compression module registered
[ 2.086560] PPP MPPE Compression module registered
[ 2.086659] NET: Registered protocol family 24
[ 2.086767] PPPoL2TP kernel driver, V1.0
[ 2.090465] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 2.094370] CSLIP: code copyright 1989 Regents of the University of California.
[ 2.098394] SLIP linefill/keepalive option.
[ 2.102543] tun: Universal TUN/TAP device driver, 1.6
[ 2.106745] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.111240] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 2.115671] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 2.120303] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.124955] iwlagn 0000:03:00.0: setting latency timer to 64
[ 2.125051] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 2.170893] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 2.176129] iwlagn 0000:03:00.0: PCI INT A disabled
[ 2.181199] wmaster0 (iwlagn): not using net_device_ops yet
[ 2.187240] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.187296] wlan0 (iwlagn): not using net_device_ops yet
[ 2.193767] console [netcon0] enabled
[ 2.198803] netconsole: network logging started
[ 2.204221] Loading iSCSI transport class v2.0-870.
[ 2.210119] Driver 'sd' needs updating - please use bus_type methods
[ 2.215536] Driver 'sr' needs updating - please use bus_type methods
[ 2.221244] ahci 0000:00:1f.2: version 3.0
[ 2.221286] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.226719] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
[ 2.231994] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 2.237288] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.237487] scsi0 : ahci
[ 2.243171] scsi1 : ahci
[ 2.248728] scsi2 : ahci
[ 2.254284] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
[ 2.259421] ata2: DUMMY
[ 2.264385] ata3: DUMMY
[ 2.992079] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.998294] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 2.998302] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3.003184] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.008229] ata1.00: ATA-7: SAMSUNG MCCOE64G8MPP-0VA, PS105L16, max UDMA/100
[ 3.013126] ata1.00: 125045424 sectors, multi 16: LBA48
[ 3.018868] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 3.018876] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3.023762] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.028827] ata1.00: configured for UDMA/100
[ 3.044698] ata1.00: configured for UDMA/100
[ 3.049472] ata1: EH complete
[ 3.065237] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MCCOE64G PS10 PQ: 0 ANSI: 5
[ 3.070544] sd 0:0:0:0: [sda] 125045424 512-byte hardware sectors: (64.0 GB/59.6 GiB)
[ 3.075231] sd 0:0:0:0: [sda] Write Protect is off
[ 3.079876] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.079956] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.084938] sd 0:0:0:0: [sda] 125045424 512-byte hardware sectors: (64.0 GB/59.6 GiB)
[ 3.089702] sd 0:0:0:0: [sda] Write Protect is off
[ 3.094287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.094365] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.098797] sda: sda1 sda2 sda3
[ 3.104390] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.109179] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.114042] ata_piix 0000:00:1f.1: version 2.12
[ 3.114063] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 3.118669] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.118843] scsi3 : ata_piix
[ 3.123703] scsi4 : ata_piix
[ 3.129793] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
[ 3.134254] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
[ 3.303604] ata5: port disabled. ignoring.
[ 3.304527] usbcore: registered new interface driver hwa-rc
[ 3.308953] usbcore: registered new interface driver i1480-dfu-usb
[ 3.313348] usbcore: registered new interface driver i1480u_wlp
[ 3.317917] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.322801] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 3.327038] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.331301] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.331313] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.335827] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.343948] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.343988] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfa426c00
[ 3.358053] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.362199] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.366384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.370486] usb usb1: Product: EHCI Host Controller
[ 3.374610] usb usb1: Manufacturer: Linux 2.6.28 ehci_hcd
[ 3.378760] usb usb1: SerialNumber: 0000:00:1a.7
[ 3.383129] usb usb1: configuration #1 chosen from 1 choice
[ 3.387462] hub 1-0:1.0: USB hub found
[ 3.391564] hub 1-0:1.0: 4 ports detected
[ 3.396806] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 3.400906] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.404997] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.405009] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.409484] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.417582] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.421662] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.421702] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfa427000
[ 3.436053] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.440194] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.444361] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.448470] usb usb2: Product: EHCI Host Controller
[ 3.452624] usb usb2: Manufacturer: Linux 2.6.28 ehci_hcd
[ 3.456762] usb usb2: SerialNumber: 0000:00:1d.7
[ 3.461144] usb usb2: configuration #1 chosen from 1 choice
[ 3.465390] hub 2-0:1.0: USB hub found
[ 3.469508] hub 2-0:1.0: 6 ports detected
[ 3.474216] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.478479] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.482791] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.482801] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.487315] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.491574] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 3.495820] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.499965] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.504093] usb usb3: Product: UHCI Host Controller
[ 3.508170] usb usb3: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.512225] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.516514] usb usb3: configuration #1 chosen from 1 choice
[ 3.520659] hub 3-0:1.0: USB hub found
[ 3.524614] hub 3-0:1.0: 2 ports detected
[ 3.529603] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[ 3.533542] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.537571] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.537582] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.541840] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.545913] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 3.549995] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.554039] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.558174] usb usb4: Product: UHCI Host Controller
[ 3.562216] usb usb4: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.566289] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.570544] usb usb4: configuration #1 chosen from 1 choice
[ 3.574749] hub 4-0:1.0: USB hub found
[ 3.578728] hub 4-0:1.0: 2 ports detected
[ 3.583864] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 3.587927] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.592036] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.592047] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.596437] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.600502] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[ 3.604626] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.608712] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.612765] usb usb5: Product: UHCI Host Controller
[ 3.616845] usb usb5: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.620947] usb usb5: SerialNumber: 0000:00:1d.0
[ 3.625219] usb usb5: configuration #1 chosen from 1 choice
[ 3.629448] hub 5-0:1.0: USB hub found
[ 3.633452] hub 5-0:1.0: 2 ports detected
[ 3.637919] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.642021] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.642035] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.646450] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.650633] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[ 3.654851] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.659001] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.663096] usb usb6: Product: UHCI Host Controller
[ 3.667218] usb usb6: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.671364] usb usb6: SerialNumber: 0000:00:1d.1
[ 3.675730] usb usb6: configuration #1 chosen from 1 choice
[ 3.680076] hub 6-0:1.0: USB hub found
[ 3.684154] hub 6-0:1.0: 2 ports detected
[ 3.689515] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 3.693617] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.697779] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.697790] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.702207] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.706465] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[ 3.710607] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.714722] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.718785] usb usb7: Product: UHCI Host Controller
[ 3.722842] usb usb7: Manufacturer: Linux 2.6.28 uhci_hcd
[ 3.726900] usb usb7: SerialNumber: 0000:00:1d.2
[ 3.731249] usb usb7: configuration #1 chosen from 1 choice
[ 3.735560] hub 7-0:1.0: USB hub found
[ 3.739673] hub 7-0:1.0: 2 ports detected
[ 3.744417] usbcore: registered new interface driver hwa-hc
[ 3.748666] usbcore: registered new interface driver wusb-cbaf
[ 3.752842] usbcore: registered new interface driver cdc_acm
[ 3.756859] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.761107] usbcore: registered new interface driver usblp
[ 3.765287] usbcore: registered new interface driver cdc_wdm
[ 3.769444] usbcore: registered new interface driver usbtmc
[ 3.773369] Initializing USB Mass Storage driver...
[ 3.777530] usbcore: registered new interface driver usb-storage
[ 3.781554] USB Mass Storage support registered.
[ 3.785728] usbcore: registered new interface driver libusual
[ 3.790238] usbcore: registered new interface driver usbserial
[ 3.794232] usbserial: USB Serial Driver core
[ 3.798304] USB Serial support registered for FTDI USB Serial Device
[ 3.802520] usbcore: registered new interface driver ftdi_sio
[ 3.806533] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[ 3.810688] USB Serial support registered for pl2303
[ 3.814871] usbcore: registered new interface driver pl2303
[ 3.818895] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 3.823085] USB Serial support registered for Sierra USB modem
[ 3.827279] usbcore: registered new interface driver sierra
[ 3.831318] sierra: v.1.3.2:USB Driver for Sierra Wireless USB modems
[ 3.835778] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.849536] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.853683] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.858086] mice: PS/2 mouse device common for all mice
[ 3.865584] rtc_cmos 00:07: RTC can wake from S4
[ 3.869879] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.874096] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.879054] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.883326] Bluetooth: Generic Bluetooth USB driver ver 0.4
[ 3.884566] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.891987] usbcore: registered new interface driver btusb
[ 3.897890] cpuidle: using governor ladder
[ 3.904128] cpuidle: using governor menu
[ 3.911873] usbcore: registered new interface driver hiddev
[ 3.916342] usbcore: registered new interface driver usbhid
[ 3.920663] usbhid: v2.6:USB HID core driver
[ 3.925816] thinkpad_acpi: ThinkPad ACPI Extras v0.21
[ 3.930127] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.934361] thinkpad_acpi: ThinkPad BIOS 7TET26WW (1.02a), EC 7THT15WW-1.00c
[ 3.938695] thinkpad_acpi: Lenovo ThinkPad X300, model 647814G
[ 3.944603] thinkpad_acpi: radio switch found; radios are enabled
[ 3.949224] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.953643] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.979530] Registered led device: tpacpi::thinklight
[ 3.984226] Registered led device: tpacpi::power
[ 3.988771] Registered led device: tpacpi:orange:batt
[ 3.993264] Registered led device: tpacpi:green:batt
[ 3.997641] Registered led device: tpacpi::dock_active
[ 4.002069] Registered led device: tpacpi::bay_active
[ 4.006443] Registered led device: tpacpi::dock_batt
[ 4.010765] Registered led device: tpacpi::unknown_led
[ 4.015363] Registered led device: tpacpi::standby
[ 4.024277] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 4.029475] input: ThinkPad Extra Buttons as /devices/virtual/input/input4
[ 4.035843] Advanced Linux Sound Architecture Driver Version 1.0.18a.
[ 4.041516] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.045873] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 4.050272] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.066120] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 4.189828] usb 2-5: New USB device found, idVendor=17ef, idProduct=4807
[ 4.194199] usb 2-5: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 4.198626] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
[ 4.203362] usb 2-5: configuration #1 chosen from 1 choice
[ 4.386993] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 4.413297] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
[ 4.417897] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 4.436235] ALSA device list:
[ 4.440663] #0: HDA Intel at 0xfa220000 irq 17
[ 4.445387] oprofile: using NMI interrupt.
[ 4.449816] Netfilter messages via NETLINK v0.30.
[ 4.454410] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.459812] ctnetlink v0.93: registering with nfnetlink.
[ 4.466094] IPv4 over IPv4 tunneling driver
[ 4.471869] GRE over IPv4 tunneling driver
[ 4.479249] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.483759] TCP cubic registered
[ 4.488083] Initializing XFRM netlink socket
[ 4.493532] NET: Registered protocol family 10
[ 4.500077] Clocksource tsc unstable (delta = -159527867 ns)
[ 4.511495] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.516037] IPv6 over IPv4 tunneling driver
[ 4.524383] NET: Registered protocol family 17
[ 4.528528] Bluetooth: L2CAP ver 2.11
[ 4.532642] Bluetooth: L2CAP socket layer initialized
[ 4.536784] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.540910] Bluetooth: SCO socket layer initialized
[ 4.545200] Bluetooth: RFCOMM socket layer initialized
[ 4.549310] Bluetooth: RFCOMM TTY layer initialized
[ 4.553449] Bluetooth: RFCOMM ver 1.10
[ 4.557541] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.561602] Bluetooth: BNEP filters: protocol multicast
[ 4.565636] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.570856] RPC: Registered udp transport module.
[ 4.574842] RPC: Registered tcp transport module.
[ 4.578709] lib80211: common routines for IEEE802.11 drivers
[ 4.582518] lib80211_crypt: registered algorithm 'NULL'
[ 4.584333] Using IPI No-Shortcut mode
[ 4.589121] registered taskstats version 1
[ 4.593370] Magic number: 9:181:902
[ 4.597300] block nbd2: hash matches
[ 4.604865] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 4.607254] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.609644] usb 3-1: Product: BCM2045B
[ 4.612036] usb 3-1: Manufacturer: Broadcom Corp
[ 4.614696] usb 3-1: configuration #1 chosen from 1 choice
[ 4.617850] kjournald starting. Commit interval 5 seconds
[ 4.620301] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.622900] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 4.626100] Freeing unused kernel memory: 1592k freed
[ 4.628859] Write protecting the kernel text: 4212k
[ 4.631450] Write protecting the kernel read-only data: 2124k
[ 4.708138] modprobe used greatest stack depth: 6476 bytes left
[ 4.827064] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 4.892289] mount used greatest stack depth: 6112 bytes left
[ 4.996841] usb 3-2: New USB device found, idVendor=0483, idProduct=2016
[ 5.000913] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.004952] usb 3-2: Product: Biometric Coprocessor
[ 5.008921] usb 3-2: Manufacturer: STMicroelectronics
[ 5.013093] usb 3-2: configuration #1 chosen from 1 choice
[ 5.226321] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 5.378874] usb 6-1: New USB device found, idVendor=1199, idProduct=6812
[ 5.381672] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.384522] usb 6-1: Product: Mini Card
[ 5.387328] usb 6-1: Manufacturer: Sierra Wireless, Incorporated
[ 5.390357] usb 6-1: configuration #1 chosen from 1 choice
[ 5.398893] sierra 6-1:1.0: Sierra USB modem converter detected
[ 5.402960] usb 6-1: Sierra USB modem converter now attached to ttyUSB0
[ 5.405928] usb 6-1: Sierra USB modem converter now attached to ttyUSB1
[ 5.408857] usb 6-1: Sierra USB modem converter now attached to ttyUSB2
[ 5.811356] v4l1_compat: disagrees about version of symbol struct_module
[ 5.820772] videodev: disagrees about version of symbol struct_module
[ 5.849823] v4l2_compat_ioctl32: disagrees about version of symbol struct_module
[ 5.884593] uvcvideo: disagrees about version of symbol struct_module
[ 5.887740] modprobe used greatest stack depth: 6088 bytes left
[ 5.946147] egrep used greatest stack depth: 6004 bytes left
[ 7.315991] Unable to find swap-space signature
[ 7.436973] EXT3 FS on sda3, internal journal
[ 7.900224] Unable to find swap-space signature
[ 8.877451] rc used greatest stack depth: 5928 bytes left
[ 9.675194] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 14.738960] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.746288] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.751471] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106)
[ 14.751574] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 14.777362] iwlagn loaded firmware version 228.57.2.21
[ 14.985588] Registered led device: iwl-phy0:radio
[ 14.990605] Registered led device: iwl-phy0:assoc
[ 14.995447] Registered led device: iwl-phy0:RX
[ 15.004090] Registered led device: iwl-phy0:TX
[ 15.056165] ADDRCONF(NETDEV_UP): wlan0: link is not ready
next parent reply other threads:[~2009-01-11 13:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <621d098f0901110546p2b99a525k5de54e37fa181197@mail.gmail.com>
2009-01-11 13:51 ` Jan Dittmer [this message]
2009-01-11 21:21 ` Diego Calleja
2009-01-11 21:39 ` Dave Airlie
2009-01-11 22:04 ` Diego Calleja
2009-01-12 7:42 ` Jan Dittmer
2009-01-12 8:04 ` Dave Airlie
2009-01-12 8:37 ` Jan Dittmer
2009-01-12 17:56 ` Jesse Barnes
2009-01-12 18:30 ` Diego Calleja
2009-01-12 21:19 ` Jan Dittmer
2009-01-12 21:33 ` Jan Dittmer
2009-01-12 21:53 ` Jesse Barnes
2009-01-12 22:08 ` Jan Dittmer
2009-01-12 22:29 ` Jan Dittmer
2009-01-12 23:19 ` Jesse Barnes
2009-01-12 13:03 ` Olivier Galibert
2009-01-12 17:53 ` Jesse Barnes
2009-01-12 21:32 ` Olivier Galibert
2009-01-12 21:59 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=621d098f0901110551v5a05f69aqc4e06a6905989d6e@mail.gmail.com \
--to=jdi@l4x.org \
--cc=airlied@linux.ie \
--cc=eric.anholt@iintel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®