From: "Xu, Baojun" <baojun.xu@ti.com>
To: "tiwai@suse.de" <tiwai@suse.de>
Cc: "robh+dt@kernel.org" <robh+dt@kernel.org>,
"andriy.shevchenko@linux.intel.com"
<andriy.shevchenko@linux.intel.com>,
"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
"perex@perex.cz" <perex@perex.cz>,
"pierre-louis.bossart@linux.intel.com"
<pierre-louis.bossart@linux.intel.com>,
"Lu, Kevin" <kevin-lu@ti.com>,
"Ding, Shenghao" <shenghao-ding@ti.com>,
"Navada Kanyana, Mukund" <navada@ti.com>,
"13916275206@139.com" <13916275206@139.com>,
"Hampiholi, Vallabha" <v-hampiholi@ti.com>,
"P O, Vijeth" <v-po@ti.com>,
"Holalu Yogendra, Niranjan" <niranjan.hy@ti.com>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"liam.r.girdwood@intel.com" <liam.r.girdwood@intel.com>,
"yung-chuan.liao@linux.intel.com"
<yung-chuan.liao@linux.intel.com>,
"broonie@kernel.org" <broonie@kernel.org>,
"soyer@irl.hu" <soyer@irl.hu>
Subject: Re: [PATCH v6 0/1] Add tas2781 driver for SPI.
Date: Fri, 31 May 2024 06:10:44 +0000 [thread overview]
Message-ID: <62a298a58b944ecdaa1b2842d51f3a38@ti.com> (raw)
In-Reply-To: <20240529155653.3037-1-baojun.xu@ti.com>
Hi Pierre,
Do you know any different between windows and Ubuntu on SPI inialyze?
We are testing my patch on Laptop (HP-Varcolac, SSID:103C8B92, fly-out SPI & I2S cables), no any issue with wondows, but with Linux, second speaker has no sound, it's initialyze is totally same with first AMP, and relative registers can be dumped, no problem found.
Best Regards
Jim
________________________________________
From: Xu, Baojun
Sent: 29 May 2024 23:56
To: tiwai@suse.de
Cc: robh+dt@kernel.org; andriy.shevchenko@linux.intel.com; lgirdwood@gmail.com; perex@perex.cz; pierre-louis.bossart@linux.intel.com; Lu, Kevin; Ding, Shenghao; Navada Kanyana, Mukund; 13916275206@139.com; Hampiholi, Vallabha; P O, Vijeth; Holalu Yogendra, Niranjan; alsa-devel@alsa-project.org; linux-kernel@vger.kernel.org; liam.r.girdwood@intel.com; yung-chuan.liao@linux.intel.com; Xu, Baojun; broonie@kernel.org; soyer@irl.hu
Subject: [PATCH v6 0/1] Add tas2781 driver for SPI.
This patch was used to add TAS2781 devices on SPI support in sound/pci/hda.
It use ACPI node descript about parameters of TAS2781 on SPI, it like:
Scope (_SB.PC00.SPI0)
{
Device (GSPK)
{
Name (_HID, "TXNW2781") // _HID: Hardware ID
Method (_CRS, 0, NotSerialized)
{
Name (RBUF, ResourceTemplate ()
{
SpiSerialBusV2 (...)
SpiSerialBusV2 (...)
}
}
}
}
And in platform/x86/serial-multi-instantiate.c, those spi devices will be
added into system as a single SPI device, so TAS2781 SPI driver will
probe twice for every single SPI device. And driver will also parser
mono DSP firmware binary and RCA binary for itself.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Baojun Xu (1):
ALSA: hda/tas2781: Add tas2781 hda driver based on SPI
drivers/acpi/scan.c | 1 +
.../platform/x86/serial-multi-instantiate.c | 12 +
sound/pci/hda/Kconfig | 14 +
sound/pci/hda/Makefile | 2 +
sound/pci/hda/patch_realtek.c | 13 +
sound/pci/hda/tas2781-spi.h | 148 ++
sound/pci/hda/tas2781_hda_spi.c | 1266 ++++++++++
sound/pci/hda/tas2781_spi_fwlib.c | 2101 +++++++++++++++++
8 files changed, 3557 insertions(+)
create mode 100644 sound/pci/hda/tas2781-spi.h
create mode 100644 sound/pci/hda/tas2781_hda_spi.c
create mode 100644 sound/pci/hda/tas2781_spi_fwlib.c
--
2.40.1
prev parent reply other threads:[~2024-05-31 6:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-29 15:56 Baojun Xu
2024-05-29 15:56 ` [PATCH v6 1/1] ALSA: hda/tas2781: Add tas2781 hda driver based on SPI Baojun Xu
2024-05-31 6:10 ` Xu, Baojun [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=62a298a58b944ecdaa1b2842d51f3a38@ti.com \
--to=baojun.xu@ti.com \
--cc=13916275206@139.com \
--cc=alsa-devel@alsa-project.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=broonie@kernel.org \
--cc=kevin-lu@ti.com \
--cc=lgirdwood@gmail.com \
--cc=liam.r.girdwood@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=navada@ti.com \
--cc=niranjan.hy@ti.com \
--cc=perex@perex.cz \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=robh+dt@kernel.org \
--cc=shenghao-ding@ti.com \
--cc=soyer@irl.hu \
--cc=tiwai@suse.de \
--cc=v-hampiholi@ti.com \
--cc=v-po@ti.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®