From: Hans de Goede <hdegoede@redhat.com>
To: "Samuel Čavoj" <samuel@cavoj.net>
Cc: Mark Gross <mgross@linux.intel.com>,
Corentin Chary <corentin.chary@gmail.com>,
platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] platform/x86: asus-wmi: Add support for SW_TABLET_MODE on UX360
Date: Wed, 28 Oct 2020 12:50:22 +0100 [thread overview]
Message-ID: <635f6034-9ad8-ca97-9a63-6557ecbd565e@redhat.com> (raw)
In-Reply-To: <20201020220944.1075530-1-samuel@cavoj.net>
Hi,
On 10/21/20 12:09 AM, Samuel Čavoj wrote:
> The UX360CA has a WMI device id 0x00060062, which reports whether the
> lid is flipped in tablet mode (1) or in normal laptop mode (0).
>
> Add a quirk (quirk_asus_use_lid_flip_devid) for devices on which this
> WMI device should be used to figure out the SW_TABLET_MODE state, as
> opposed to the quirk_asus_use_kbd_dock_devid.
>
> Additionally, the device needs to be queried on resume and restore
> because the firmware does not generate an event if the laptop is put to
> sleep while in tablet mode, flipped to normal mode, and later awoken.
>
> It is assumed other UX360* models have the same WMI device. As such, the
> quirk is applied to devices with DMI_MATCH(DMI_PRODUCT_NAME, "UX360").
> More devices with this feature need to be tested and added accordingly.
>
> The reason for using an allowlist via the quirk mechanism is that the new
> WMI device (0x00060062) is also present on some models which do not have
> a 360 degree hinge (at least FX503VD and GL503VD from Hans' DSTS
> collection) and therefore its presence cannot be relied on.
>
> Signed-off-by: Samuel Čavoj <samuel@cavoj.net>
> Cc: Hans de Goede <hdegoede@redhat.com>
Thank you for your patch, I've applied this patch to my review-hans
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans
As discussed I've fixed the whitespace issue; and I've also fixed
the following 2 checkpatch warnings:
ERROR: open brace '{' following function definitions go on the next line
#114: FILE: drivers/platform/x86/asus-wmi.c:414:
+static void lid_flip_tablet_mode_get_state(struct asus_wmi *asus) {
WARNING: Missing a blank line after declarations
#116: FILE: drivers/platform/x86/asus-wmi.c:416:
+ int result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_LID_FLIP);
+ if (result >= 0) {
Next time please consider doing:
git format-patch HEAD~
scripts/checkpatch.pl 0001-*.patch
Before sending out your patch.
Note it will show up in my review-hans branch once I've pushed my local
branch there, which might take a while.
Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.
Regards,
Hans
> ---
> changed v2 -> v3:
> - added check on resume from sleep and restore
> ---
> drivers/platform/x86/asus-nb-wmi.c | 15 +++++++++
> drivers/platform/x86/asus-wmi.c | 38 ++++++++++++++++++++++
> drivers/platform/x86/asus-wmi.h | 1 +
> include/linux/platform_data/x86/asus-wmi.h | 1 +
> 4 files changed, 55 insertions(+)
>
> diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
> index 1d9fbabd02fb..d41d7ad14be0 100644
> --- a/drivers/platform/x86/asus-nb-wmi.c
> +++ b/drivers/platform/x86/asus-nb-wmi.c
> @@ -119,6 +119,11 @@ static struct quirk_entry quirk_asus_use_kbd_dock_devid = {
> .use_kbd_dock_devid = true,
> };
>
> +static struct quirk_entry quirk_asus_use_lid_flip_devid = {
> + .wmi_backlight_set_devstate = true,
> + .use_lid_flip_devid = true,
> +};
> +
> static int dmi_matched(const struct dmi_system_id *dmi)
> {
> pr_info("Identified laptop model '%s'\n", dmi->ident);
> @@ -520,6 +525,16 @@ static const struct dmi_system_id asus_quirks[] = {
> },
> .driver_data = &quirk_asus_use_kbd_dock_devid,
> },
> + {
> + .callback = dmi_matched,
> + .ident = "ASUS ZenBook Flip UX360",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> + /* Match UX360* */
> + DMI_MATCH(DMI_PRODUCT_NAME, "UX360"),
> + },
> + .driver_data = &quirk_asus_use_lid_flip_devid,
> + },
> {},
> };
>
> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> index 39e1a6396e08..864c608ad569 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -63,6 +63,7 @@ MODULE_LICENSE("GPL");
> #define NOTIFY_KBD_BRTTOGGLE 0xc7
> #define NOTIFY_KBD_FBM 0x99
> #define NOTIFY_KBD_TTP 0xae
> +#define NOTIFY_LID_FLIP 0xfa
>
> #define ASUS_WMI_FNLOCK_BIOS_DISABLED BIT(0)
>
> @@ -375,6 +376,20 @@ static int asus_wmi_input_init(struct asus_wmi *asus)
> }
> }
>
> + if (asus->driver->quirks->use_lid_flip_devid) {
> + result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_LID_FLIP);
> + if (result < 0)
> + asus->driver->quirks->use_lid_flip_devid = 0;
> + if (result >= 0) {
> + input_set_capability(asus->inputdev, EV_SW, SW_TABLET_MODE);
> + input_report_switch(asus->inputdev, SW_TABLET_MODE, result);
> + } else if (result == -ENODEV) {
> + pr_err("This device has lid_flip quirk but got ENODEV checking it. This is a bug.");
> + } else {
> + pr_err("Error checking for lid-flip: %d\n", result);
> + }
> + }
> +
> err = input_register_device(asus->inputdev);
> if (err)
> goto err_free_dev;
> @@ -394,6 +409,16 @@ static void asus_wmi_input_exit(struct asus_wmi *asus)
> asus->inputdev = NULL;
> }
>
> +/* Tablet mode ****************************************************************/
> +
> +static void lid_flip_tablet_mode_get_state(struct asus_wmi *asus) {
> + int result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_LID_FLIP);
> + if (result >= 0) {
> + input_report_switch(asus->inputdev, SW_TABLET_MODE, result);
> + input_sync(asus->inputdev);
> + }
> +}
> +
> /* Battery ********************************************************************/
>
> /* The battery maximum charging percentage */
> @@ -2128,6 +2153,11 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus)
> return;
> }
>
> + if (asus->driver->quirks->use_lid_flip_devid && code == NOTIFY_LID_FLIP) {
> + lid_flip_tablet_mode_get_state(asus);
> + return;
> + }
> +
> if (asus->fan_boost_mode_available && code == NOTIFY_KBD_FBM) {
> fan_boost_mode_switch_next(asus);
> return;
> @@ -2719,6 +2749,10 @@ static int asus_hotk_resume(struct device *device)
>
> if (asus_wmi_has_fnlock_key(asus))
> asus_wmi_fnlock_update(asus);
> +
> + if (asus->driver->quirks->use_lid_flip_devid)
> + lid_flip_tablet_mode_get_state(asus);
> +
> return 0;
> }
>
> @@ -2757,6 +2791,10 @@ static int asus_hotk_restore(struct device *device)
>
> if (asus_wmi_has_fnlock_key(asus))
> asus_wmi_fnlock_update(asus);
> +
> + if (asus->driver->quirks->use_lid_flip_devid)
> + lid_flip_tablet_mode_get_state(asus);
> +
> return 0;
> }
>
> diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h
> index 1a95c172f94b..b302415bf1d9 100644
> --- a/drivers/platform/x86/asus-wmi.h
> +++ b/drivers/platform/x86/asus-wmi.h
> @@ -34,6 +34,7 @@ struct quirk_entry {
> bool wmi_backlight_set_devstate;
> bool wmi_force_als_set;
> bool use_kbd_dock_devid;
> + bool use_lid_flip_devid;
> int wapf;
> /*
> * For machines with AMD graphic chips, it will send out WMI event
> diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
> index 897b8332a39f..2f274cf52805 100644
> --- a/include/linux/platform_data/x86/asus-wmi.h
> +++ b/include/linux/platform_data/x86/asus-wmi.h
> @@ -62,6 +62,7 @@
>
> /* Misc */
> #define ASUS_WMI_DEVID_CAMERA 0x00060013
> +#define ASUS_WMI_DEVID_LID_FLIP 0x00060062
>
> /* Storage */
> #define ASUS_WMI_DEVID_CARDREADER 0x00080013
>
next prev parent reply other threads:[~2020-10-28 21:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-20 22:09 Samuel Čavoj
2020-10-20 22:14 ` Samuel Čavoj
2020-10-20 22:29 ` Samuel Čavoj
2020-10-28 11:44 ` Hans de Goede
2020-10-28 11:50 ` Hans de Goede [this message]
2020-10-28 12:22 ` Samuel Čavoj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=635f6034-9ad8-ca97-9a63-6557ecbd565e@redhat.com \
--to=hdegoede@redhat.com \
--cc=corentin.chary@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgross@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=samuel@cavoj.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®