From: Hans de Goede <hdegoede@redhat.com>
To: "David E. Box" <david.e.box@linux.intel.com>,
irenic.rajneesh@gmail.com, rajvi.jingar@linux.intel.com,
markgross@kernel.org, andy.shevchenko@gmail.com
Cc: linux-kernel@vger.kernel.org, platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH] platform/x86/intel/pmc: Alder Lake PCH slp_s0_residency fix
Date: Mon, 27 Mar 2023 13:35:42 +0200 [thread overview]
Message-ID: <6395d2c2-33e4-fed4-f46f-e350e923e081@redhat.com> (raw)
In-Reply-To: <20230320212029.3154407-1-david.e.box@linux.intel.com>
Hi,
On 3/20/23 22:20, David E. Box wrote:
> From: Rajvi Jingar <rajvi.jingar@linux.intel.com>
>
> For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the
> slp_s0_residency attribute has been reporting the wrong value. Unlike other
> platforms, ADL PCH does not have a counter for the time that the SLP_S0
> signal was asserted. Instead, firmware uses the aggregate of the Low Power
> Mode (LPM) substate counters as the S0ix value. Since the LPM counters run
> at a different frequency, this lead to misreporting of the S0ix time.
>
> Add a check for Alder Lake PCH and adjust the frequency accordingly when
> display slp_s0_residency.
>
> Fixes: bbab31101f44 ("platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver")
> Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
> Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Thank you for your patch, I've applied this patch to my fixes
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=fixes
Note it will show up in my fixes branch once I've pushed my
local branch there, which might take a while.
I will include this patch in my next fixes pull-req to Linus
for the current kernel development cycle.
Regards,
Hans
> ---
> drivers/platform/x86/intel/pmc/core.c | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/x86/intel/pmc/core.c b/drivers/platform/x86/intel/pmc/core.c
> index e489d2175e42..61ca7c37fb02 100644
> --- a/drivers/platform/x86/intel/pmc/core.c
> +++ b/drivers/platform/x86/intel/pmc/core.c
> @@ -66,7 +66,18 @@ static inline void pmc_core_reg_write(struct pmc_dev *pmcdev, int reg_offset,
>
> static inline u64 pmc_core_adjust_slp_s0_step(struct pmc_dev *pmcdev, u32 value)
> {
> - return (u64)value * pmcdev->map->slp_s0_res_counter_step;
> + /*
> + * ADL PCH does not have the SLP_S0 counter and LPM Residency counters are
> + * used as a workaround which uses 30.5 usec tick. All other client
> + * programs have the legacy SLP_S0 residency counter that is using the 122
> + * usec tick.
> + */
> + const int lpm_adj_x2 = pmcdev->map->lpm_res_counter_step_x2;
> +
> + if (pmcdev->map == &adl_reg_map)
> + return (u64)value * GET_X2_COUNTER((u64)lpm_adj_x2);
> + else
> + return (u64)value * pmcdev->map->slp_s0_res_counter_step;
> }
>
> static int set_etr3(struct pmc_dev *pmcdev)
>
> base-commit: 02c464b73645404654359ad21f368a13735e2850
prev parent reply other threads:[~2023-03-27 11:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-20 21:20 David E. Box
2023-03-21 0:40 ` Rajneesh Bhardwaj
2023-03-21 6:03 ` Andy Shevchenko
2023-03-27 11:35 ` Hans de Goede [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6395d2c2-33e4-fed4-f46f-e350e923e081@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy.shevchenko@gmail.com \
--cc=david.e.box@linux.intel.com \
--cc=irenic.rajneesh@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rajvi.jingar@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®