From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
To: Roger Lu <roger.lu@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Enric Balletbo Serra <eballetbo@gmail.com>,
Kevin Hilman <khilman@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Nicolas Boichat <drinkcat@google.com>,
Stephen Boyd <sboyd@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: Fan Chen <fan.chen@mediatek.com>,
HenryC Chen <HenryC.Chen@mediatek.com>,
YT Lee <yt.lee@mediatek.com>,
Xiaoqing Liu <Xiaoqing.Liu@mediatek.com>,
Charles Yang <Charles.Yang@mediatek.com>,
Angus Lin <Angus.Lin@mediatek.com>,
Mark Rutland <mark.rutland@arm.com>, Nishanth Menon <nm@ti.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org,
Project_Global_Chrome_Upstream_Group@mediatek.com,
Guenter Roeck <linux@roeck-us.net>
Subject: Re: [PATCH v21 3/8] soc: mediatek: SVS: introduce MTK SVS engine
Date: Fri, 7 Jan 2022 15:33:56 +0100 [thread overview]
Message-ID: <63d8884d-d02d-53f9-8524-4a074ca5bfea@collabora.com> (raw)
In-Reply-To: <20220107095200.4389-4-roger.lu@mediatek.com>
Il 07/01/22 10:51, Roger Lu ha scritto:
> The Smart Voltage Scaling(SVS) engine is a piece of hardware
> which calculates suitable SVS bank voltages to OPP voltage table.
> Then, DVFS driver could apply those SVS bank voltages to PMIC/Buck
> when receiving OPP_EVENT_ADJUST_VOLTAGE.
>
> Signed-off-by: Roger Lu <roger.lu@mediatek.com>
> ---
> drivers/soc/mediatek/Kconfig | 10 +
> drivers/soc/mediatek/Makefile | 1 +
> drivers/soc/mediatek/mtk-svs.c | 1446 ++++++++++++++++++++++++++++++++
> 3 files changed, 1457 insertions(+)
> create mode 100644 drivers/soc/mediatek/mtk-svs.c
>
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index fdd8bc08569e..3c3eedea35f7 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -73,4 +73,14 @@ config MTK_MMSYS
> Say yes here to add support for the MediaTek Multimedia
> Subsystem (MMSYS).
>
> +config MTK_SVS
> + tristate "MediaTek Smart Voltage Scaling(SVS)"
> + depends on MTK_EFUSE && NVMEM
> + help
> + The Smart Voltage Scaling(SVS) engine is a piece of hardware
> + which has several controllers(banks) for calculating suitable
> + voltage to different power domains(CPU/GPU/CCI) according to
> + chip process corner, temperatures and other factors. Then DVFS
> + driver could apply SVS bank voltage to PMIC/Buck.
> +
> endmenu
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index 90270f8114ed..0e9e703c931a 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -7,3 +7,4 @@ obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> obj-$(CONFIG_MTK_SCPSYS_PM_DOMAINS) += mtk-pm-domains.o
> obj-$(CONFIG_MTK_MMSYS) += mtk-mmsys.o
> obj-$(CONFIG_MTK_MMSYS) += mtk-mutex.o
> +obj-$(CONFIG_MTK_SVS) += mtk-svs.o
> diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
> new file mode 100644
> index 000000000000..fc7e2ee44a92
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-svs.c
> @@ -0,0 +1,1446 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 MediaTek Inc.
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/completion.h>
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/kthread.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/pm_opp.h>
> +#include <linux/pm_qos.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +
> +/* svs bank 1-line sw id */
> +#define SVSB_CPU_LITTLE BIT(0)
> +#define SVSB_CPU_BIG BIT(1)
> +#define SVSB_CCI BIT(2)
> +#define SVSB_GPU BIT(3)
> +
> +/* svs bank mode support */
> +#define SVSB_MODE_ALL_DISABLE 0
> +#define SVSB_MODE_INIT01 BIT(1)
> +#define SVSB_MODE_INIT02 BIT(2)
> +
> +/* svs bank volt flags */
> +#define SVSB_INIT01_PD_REQ BIT(0)
> +#define SVSB_INIT01_VOLT_IGNORE BIT(1)
> +#define SVSB_INIT01_VOLT_INC_ONLY BIT(2)
> +
> +/* svs bank common setting */
> +#define MAX_OPP_ENTRIES 16
> +#define SVSB_DC_SIGNED_BIT BIT(15)
> +#define SVSB_DET_CLK_EN BIT(31)
> +#define SVSB_DET_MAX 0xffff
> +#define SVSB_DET_WINDOW 0xa28
> +#define SVSB_DTHI 0x1
> +#define SVSB_DTLO 0xfe
> +#define SVSB_EN_INIT01 0x1
> +#define SVSB_EN_INIT02 0x5
> +#define SVSB_EN_MASK 0x7
> +#define SVSB_EN_OFF 0x0
> +#define SVSB_INTEN_INIT0x 0x00005f01
> +#define SVSB_INTSTS_CLEAN 0x00ffffff
> +#define SVSB_INTSTS_COMPLETE 0x1
> +#define SVSB_RUNCONFIG_DEFAULT 0x80000000
> +
> +static DEFINE_SPINLOCK(svs_lock);
snip....
> +
> +struct svs_platform_data {
> + char *name;
> + struct svs_bank *banks;
> + bool (*efuse_parsing)(struct svs_platform *svsp);
> + unsigned long irqflags;
> + const u32 *regs;
> + u32 bank_max;
> + int (*probe)(struct svs_platform *svsp);
> +};
> +
Please move the definition of struct svs_platform_data at the beginning of
the file for increased readability.
With that done,
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
next prev parent reply other threads:[~2022-01-07 14:34 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-07 9:51 [PATCH v21 0/8] " Roger Lu
2022-01-07 9:51 ` [PATCH v21 1/8] dt-bindings: soc: mediatek: add mtk svs dt-bindings Roger Lu
2022-01-07 19:01 ` Rob Herring
2022-01-07 9:51 ` [PATCH v21 2/8] arm64: dts: mt8183: add svs device information Roger Lu
2022-01-07 14:33 ` AngeloGioacchino Del Regno
2022-01-07 9:51 ` [PATCH v21 3/8] soc: mediatek: SVS: introduce MTK SVS engine Roger Lu
2022-01-07 14:33 ` AngeloGioacchino Del Regno [this message]
2022-01-24 6:39 ` Roger Lu
2022-01-07 9:51 ` [PATCH v21 4/8] soc: mediatek: SVS: add monitor mode Roger Lu
2022-01-07 14:34 ` AngeloGioacchino Del Regno
2022-01-24 7:28 ` Roger Lu
2022-01-07 9:51 ` [PATCH v21 5/8] soc: mediatek: SVS: add debug commands Roger Lu
2022-01-07 14:34 ` AngeloGioacchino Del Regno
2022-01-24 10:40 ` Roger Lu
2022-01-07 9:51 ` [PATCH v21 6/8] dt-bindings: soc: mediatek: add mt8192 svs dt-bindings Roger Lu
2022-01-12 1:48 ` Rob Herring
2022-01-07 9:51 ` [PATCH v21 7/8] arm64: dts: mt8192: add svs device information Roger Lu
2022-01-07 14:33 ` AngeloGioacchino Del Regno
2022-01-24 10:48 ` Roger Lu
2022-01-24 11:49 ` AngeloGioacchino Del Regno
2022-01-07 9:52 ` [PATCH v21 8/8] soc: mediatek: SVS: add mt8192 SVS GPU driver Roger Lu
2022-01-07 14:33 ` AngeloGioacchino Del Regno
2022-01-26 7:49 ` Roger Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=63d8884d-d02d-53f9-8524-4a074ca5bfea@collabora.com \
--to=angelogioacchino.delregno@collabora.com \
--cc=Angus.Lin@mediatek.com \
--cc=Charles.Yang@mediatek.com \
--cc=HenryC.Chen@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=Xiaoqing.Liu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@google.com \
--cc=eballetbo@gmail.com \
--cc=fan.chen@mediatek.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=nm@ti.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=roger.lu@mediatek.com \
--cc=sboyd@kernel.org \
--cc=yt.lee@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®