From: Marcelo Schmitt <marcelo.schmitt@analog.com>
To: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <jic23@kernel.org>, <lars@metafoo.de>,
<Michael.Hennerich@analog.com>, <dlechner@baylibre.com>,
<nuno.sa@analog.com>, <andy@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<linus.walleij@linaro.org>, <brgl@bgdev.pl>, <broonie@kernel.org>,
<lgirdwood@gmail.com>, <marcelo.schmitt1@gmail.com>
Subject: [PATCH v6 12/12] iio: adc: ad4170: Add timestamp channel
Date: Wed, 18 Jun 2025 14:39:12 -0300 [thread overview]
Message-ID: <63ebf4408a118a749481ecb3f5ce7ad67cedfa7b.1750258776.git.marcelo.schmitt@analog.com> (raw)
In-Reply-To: <cover.1750258776.git.marcelo.schmitt@analog.com>
Add timestamp channel allowing to record the moment at which ADC samples
are captured in buffered read mode.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
---
No changes in v6.
drivers/iio/adc/ad4170.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/ad4170.c b/drivers/iio/adc/ad4170.c
index 2a2d4a05e9af..33b9a6b2255b 100644
--- a/drivers/iio/adc/ad4170.c
+++ b/drivers/iio/adc/ad4170.c
@@ -185,6 +185,7 @@
#define AD4170_NUM_ANALOG_PINS 9
#define AD4170_NUM_GPIO_PINS 4
#define AD4170_MAX_CHANNELS 16
+#define AD4170_MAX_IIO_CHANNELS (AD4170_MAX_CHANNELS + 1)
#define AD4170_MAX_ANALOG_PINS 8
#define AD4170_MAX_SETUPS 8
#define AD4170_INVALID_SETUP 9
@@ -437,7 +438,7 @@ struct ad4170_state {
int vrefs_uv[AD4170_MAX_SUP];
u32 mclk_hz;
struct ad4170_setup_info setup_infos[AD4170_MAX_SETUPS];
- struct iio_chan_spec chans[AD4170_MAX_CHANNELS];
+ struct iio_chan_spec chans[AD4170_MAX_IIO_CHANNELS];
struct ad4170_chan_info chan_infos[AD4170_MAX_CHANNELS];
struct spi_device *spi;
struct regmap *regmap;
@@ -454,6 +455,7 @@ struct ad4170_state {
unsigned int clock_ctrl;
int gpio_fn[AD4170_NUM_GPIO_PINS];
unsigned int cur_src_pins[AD4170_NUM_CURRENT_SRC];
+ unsigned int num_adc_chans;
/*
* DMA (thus cache coherency maintenance) requires the transfer buffers
* to live in their own cache lines.
@@ -2389,7 +2391,16 @@ static int ad4170_parse_channels(struct iio_dev *indio_dev)
return dev_err_probe(dev, ret, "Invalid input config\n");
st->chan_infos[chan_num].input_range_uv = ret;
+ chan_num++;
}
+ st->num_adc_chans = chan_num;
+
+ /* Add timestamp channel */
+ struct iio_chan_spec ts_chan = IIO_CHAN_SOFT_TIMESTAMP(chan_num);
+
+ st->chans[chan_num] = ts_chan;
+ num_channels = num_channels + 1;
+
indio_dev->num_channels = num_channels;
indio_dev->channels = st->chans;
@@ -2581,7 +2592,7 @@ static int ad4170_initial_config(struct iio_dev *indio_dev)
return dev_err_probe(dev, ret,
"Failed to set ADC mode to idle\n");
- for (i = 0; i < indio_dev->num_channels; i++) {
+ for (i = 0; i < st->num_adc_chans; i++) {
struct ad4170_chan_info *chan_info;
struct iio_chan_spec const *chan;
struct ad4170_setup *setup;
@@ -2706,7 +2717,7 @@ static int ad4170_buffer_predisable(struct iio_dev *indio_dev)
* is done after buffer disable. Disable all channels so only requested
* channels will be read.
*/
- for (i = 0; i < indio_dev->num_channels; i++) {
+ for (i = 0; i < st->num_adc_chans; i++) {
ret = ad4170_set_channel_enable(st, i, false);
if (ret)
return ret;
@@ -2758,7 +2769,9 @@ static irqreturn_t ad4170_trigger_handler(int irq, void *p)
memcpy(&st->bounce_buffer[i++], st->rx_buf, ARRAY_SIZE(st->rx_buf));
}
- iio_push_to_buffers(indio_dev, st->bounce_buffer);
+ iio_push_to_buffers_with_ts(indio_dev, st->bounce_buffer,
+ sizeof(st->bounce_buffer),
+ iio_get_time_ns(indio_dev));
err_out:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
--
2.47.2
next prev parent reply other threads:[~2025-06-18 17:39 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-18 17:33 [PATCH v6 00/12] iio: adc: Add support for AD4170 series of ADCs Marcelo Schmitt
2025-06-18 17:34 ` [PATCH v6 01/12] dt-bindings: iio: adc: Add AD4170 Marcelo Schmitt
2025-06-19 15:35 ` Conor Dooley
2025-06-22 13:44 ` Jonathan Cameron
2025-06-18 17:35 ` [PATCH v6 02/12] iio: adc: Add basic support for AD4170 Marcelo Schmitt
2025-06-22 14:08 ` Jonathan Cameron
2025-06-18 17:36 ` [PATCH v6 03/12] iio: adc: ad4170: Add support for calibration gain Marcelo Schmitt
2025-06-18 17:36 ` [PATCH v6 04/12] iio: adc: ad4170: Add support for calibration bias Marcelo Schmitt
2025-06-18 17:36 ` [PATCH v6 05/12] Documentation: ABI: IIO: Add sinc5+avg to the filter_type_available list Marcelo Schmitt
2025-06-22 14:09 ` Jonathan Cameron
2025-06-18 17:37 ` [PATCH v6 06/12] iio: adc: ad4170: Add digital filter and sample frequency config support Marcelo Schmitt
2025-06-20 2:38 ` kernel test robot
2025-06-22 14:12 ` Jonathan Cameron
2025-06-18 17:37 ` [PATCH v6 07/12] iio: adc: ad4170: Add support for buffered data capture Marcelo Schmitt
2025-06-22 14:18 ` Jonathan Cameron
2025-06-18 17:37 ` [PATCH v6 08/12] iio: adc: ad4170: Add clock provider support Marcelo Schmitt
2025-06-18 17:38 ` [PATCH v6 09/12] iio: adc: ad4170: Add GPIO controller support Marcelo Schmitt
2025-06-18 17:38 ` [PATCH v6 10/12] iio: adc: ad4170: Add support for internal temperature sensor Marcelo Schmitt
2025-06-18 17:38 ` [PATCH v6 11/12] iio: adc: ad4170: Add support for weigh scale and RTD sensors Marcelo Schmitt
2025-06-18 17:39 ` Marcelo Schmitt [this message]
2025-06-22 14:21 ` [PATCH v6 12/12] iio: adc: ad4170: Add timestamp channel Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=63ebf4408a118a749481ecb3f5ce7ad67cedfa7b.1750258776.git.marcelo.schmitt@analog.com \
--to=marcelo.schmitt@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=brgl@bgdev.pl \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.schmitt1@gmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®