mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org>
To: Qiang Zhao <qiang.zhao@nxp.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org>,
	linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports
Date: Wed,  7 Jan 2026 17:59:09 +0100	[thread overview]
Message-ID: <63f19db21a91729d91b3df336a56a7eb4206e561.1767804922.git.chleroy@kernel.org> (raw)

The QUICC Engine provides interrupts for a few I/O ports. This is
handled via a separate interrupt ID and managed via a triplet of
dedicated registers hosted by the SoC.

Implement an interrupt driver for it so that those IRQs can then
be linked to the related GPIOs.

Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
---
 drivers/soc/fsl/qe/Makefile      |   2 +-
 drivers/soc/fsl/qe/qe_ports_ic.c | 142 +++++++++++++++++++++++++++++++
 2 files changed, 143 insertions(+), 1 deletion(-)
 create mode 100644 drivers/soc/fsl/qe/qe_ports_ic.c

diff --git a/drivers/soc/fsl/qe/Makefile b/drivers/soc/fsl/qe/Makefile
index ec8506e131136..901a9c40d5eb7 100644
--- a/drivers/soc/fsl/qe/Makefile
+++ b/drivers/soc/fsl/qe/Makefile
@@ -11,4 +11,4 @@ obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
 obj-$(CONFIG_UCC_FAST)	+= ucc_fast.o
 obj-$(CONFIG_QE_TDM)	+= qe_tdm.o
 obj-$(CONFIG_QE_USB)	+= usb.o
-obj-$(CONFIG_QE_GPIO)	+= gpio.o
+obj-$(CONFIG_QE_GPIO)	+= gpio.o qe_ports_ic.o
diff --git a/drivers/soc/fsl/qe/qe_ports_ic.c b/drivers/soc/fsl/qe/qe_ports_ic.c
new file mode 100644
index 0000000000000..61dd09fec6f6e
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe_ports_ic.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * QUICC ENGINE I/O Ports Interrupt Controller
+ *
+ * Copyright (c) 2025 Christophe Leroy CS GROUP France (christophe.leroy@csgroup.eu)
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/platform_device.h>
+
+/* QE IC registers offset */
+#define CEPIER		0x0c
+#define CEPIMR		0x10
+#define CEPICR		0x14
+
+struct qepic_data {
+	void __iomem *reg;
+	struct irq_domain *host;
+};
+
+static void qepic_mask(struct irq_data *d)
+{
+	struct qepic_data *data = irq_data_get_irq_chip_data(d);
+
+	clrbits32(data->reg + CEPIMR, 1 << (31 - irqd_to_hwirq(d)));
+}
+
+static void qepic_unmask(struct irq_data *d)
+{
+	struct qepic_data *data = irq_data_get_irq_chip_data(d);
+
+	setbits32(data->reg + CEPIMR, 1 << (31 - irqd_to_hwirq(d)));
+}
+
+static void qepic_end(struct irq_data *d)
+{
+	struct qepic_data *data = irq_data_get_irq_chip_data(d);
+
+	out_be32(data->reg + CEPIER, 1 << (31 - irqd_to_hwirq(d)));
+}
+
+static int qepic_set_type(struct irq_data *d, unsigned int flow_type)
+{
+	struct qepic_data *data = irq_data_get_irq_chip_data(d);
+	unsigned int vec = (unsigned int)irqd_to_hwirq(d);
+
+	switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_FALLING:
+		setbits32(data->reg + CEPICR, 1 << (31 - vec));
+		return 0;
+	case IRQ_TYPE_EDGE_BOTH:
+	case IRQ_TYPE_NONE:
+		clrbits32(data->reg + CEPICR, 1 << (31 - vec));
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static struct irq_chip qepic = {
+	.name = "QEPIC",
+	.irq_mask = qepic_mask,
+	.irq_unmask = qepic_unmask,
+	.irq_eoi = qepic_end,
+	.irq_set_type = qepic_set_type,
+};
+
+static int qepic_get_irq(struct irq_desc *desc)
+{
+	struct qepic_data *data = irq_desc_get_handler_data(desc);
+	u32 event = in_be32(data->reg + CEPIER);
+
+	if (!event)
+		return -1;
+
+	return irq_find_mapping(data->host, 32 - ffs(event));
+}
+
+static void qepic_cascade(struct irq_desc *desc)
+{
+	generic_handle_irq(qepic_get_irq(desc));
+}
+
+static int qepic_host_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw)
+{
+	irq_set_chip_data(virq, h->host_data);
+	irq_set_chip_and_handler(virq, &qepic, handle_fasteoi_irq);
+	return 0;
+}
+
+static const struct irq_domain_ops qepic_host_ops = {
+	.map = qepic_host_map,
+};
+
+static int qepic_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct qepic_data *data;
+	int irq;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->reg))
+		return PTR_ERR(data->reg);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	data->host = irq_domain_add_linear(dev->of_node, 32, &qepic_host_ops, data);
+	if (!data->host)
+		return -ENODEV;
+
+	irq_set_handler_data(irq, data);
+	irq_set_chained_handler(irq, qepic_cascade);
+
+	return 0;
+}
+
+static const struct of_device_id qepic_match[] = {
+	{
+		.compatible = "fsl,mpc8323-qe-ports-ic",
+	},
+	{},
+};
+
+static struct platform_driver qepic_driver = {
+	.driver	= {
+		.name		= "qe_ports_ic",
+		.of_match_table	= qepic_match,
+	},
+	.probe	= qepic_probe,
+};
+
+static int __init qepic_init(void)
+{
+	return platform_driver_register(&qepic_driver);
+}
+arch_initcall(qepic_init);
-- 
2.49.0


             reply	other threads:[~2026-01-07 17:01 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-07 16:59 Christophe Leroy (CS GROUP) [this message]
2026-01-07 16:59 ` [PATCH 2/2] dt-bindings: " Christophe Leroy (CS GROUP)
2026-01-08 19:02   ` Rob Herring
2026-01-08 19:44     ` Christophe Leroy (CS GROUP)
2026-01-08 20:09       ` Rob Herring
2026-01-28 11:04 ` [PATCH 1/2] " Christophe Leroy (CS GROUP)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=63f19db21a91729d91b3df336a56a7eb4206e561.1767804922.git.chleroy@kernel.org \
    --to=chleroy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=qiang.zhao@nxp.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®