[PATCH V3 09/20] soc/tegra: Migrate to dev_pm_opp_set_config()

[Viresh Kumar <viresh.kumar@linaro.org>]

The OPP core now provides a unified API for setting all configuration
types, i.e. dev_pm_opp_set_config().

Lets start using it.

Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/soc/tegra/common.c | 52 +++++++++++++++++++++++---------------
 1 file changed, 31 insertions(+), 21 deletions(-)

diff --git a/drivers/soc/tegra/common.c b/drivers/soc/tegra/common.c
index 9f3fdeb1a11c..dff6d5ef4e46 100644
--- a/drivers/soc/tegra/common.c
+++ b/drivers/soc/tegra/common.c
@@ -107,36 +107,46 @@ int devm_tegra_core_dev_init_opp_table(struct device *dev,
 {
 	u32 hw_version;
 	int err;
-
 	/*
-	 * For some devices we don't have any OPP table in the DT, and in order
-	 * to use the same code path for all the devices, we create a dummy OPP
-	 * table for them via this call. The dummy OPP table is only capable of
-	 * doing clk_set_rate() on invocation of dev_pm_opp_set_rate() and
-	 * doesn't provide any other functionality.
+	 * The clk's connection id to set is NULL and this is a NULL terminated
+	 * array, hence two NULL entries.
 	 */
-	err = devm_pm_opp_set_clkname(dev, NULL);
-	if (err) {
-		dev_err(dev, "failed to set OPP clk: %d\n", err);
-		return err;
-	}
-
-	/* Tegra114+ doesn't support OPP yet */
-	if (!of_machine_is_compatible("nvidia,tegra20") &&
-	    !of_machine_is_compatible("nvidia,tegra30"))
-		return -ENODEV;
-
-	if (of_machine_is_compatible("nvidia,tegra20"))
+	const char *clk_names[] = { NULL, NULL };
+	struct dev_pm_opp_config config = {
+		/*
+		 * For some devices we don't have any OPP table in the DT, and
+		 * in order to use the same code path for all the devices, we
+		 * create a dummy OPP table for them via this. The dummy OPP
+		 * table is only capable of doing clk_set_rate() on invocation
+		 * of dev_pm_opp_set_rate() and doesn't provide any other
+		 * functionality.
+		 */
+		.clk_names = clk_names,
+	};
+
+	if (of_machine_is_compatible("nvidia,tegra20")) {
 		hw_version = BIT(tegra_sku_info.soc_process_id);
-	else
+		config.supported_hw = &hw_version;
+		config.supported_hw_count = 1;
+	} else if (of_machine_is_compatible("nvidia,tegra30")) {
 		hw_version = BIT(tegra_sku_info.soc_speedo_id);
+		config.supported_hw = &hw_version;
+		config.supported_hw_count = 1;
+	}
 
-	err = devm_pm_opp_set_supported_hw(dev, &hw_version, 1);
+	err = devm_pm_opp_set_config(dev, &config);
 	if (err) {
-		dev_err(dev, "failed to set OPP supported HW: %d\n", err);
+		dev_err(dev, "failed to set OPP config: %d\n", err);
 		return err;
 	}
 
+	/*
+	 * Tegra114+ doesn't support OPP yet, return early for non tegra20/30
+	 * case.
+	 */
+	if (!config.supported_hw)
+		return -ENODEV;
+
 	/*
 	 * Older device-trees have an empty OPP table, we will get
 	 * -ENODEV from devm_pm_opp_of_add_table() in this case.
-- 
2.31.1.272.g89b43f80a514