Re: [PATCH 1/2] dt-bindings: usb: Add documentation for sc27xx typec controller

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 07/05/2022 11:29, Cixi Geng wrote:
> From: Cixi Geng <cixi.geng1@unisoc.com>
> 
> The Spreadtrum PMIC SC27xx integrated typec port controller.
> add the bindings to describe sc27xx typec controller.
> 
> Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
> ---
>  .../bindings/usb/sprd,sc27xx-typec.yaml       | 72 +++++++++++++++++++
>  1 file changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/sprd,sc27xx-typec.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/sprd,sc27xx-typec.yaml b/Documentation/devicetree/bindings/usb/sprd,sc27xx-typec.yaml
> new file mode 100644
> index 000000000000..6e49198c88da
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/sprd,sc27xx-typec.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2022 Unisoc Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/sprd,sc27xx-typec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SC27XX Type-C port controller
> +
> +description:
> +  The UNISOC, also know as Spreadtrum, SC27XX is a USB Type-C port controller which
> +  supports role and plug orientation detection using the CC pins. It is
> +  compatible with the USB Type-C Cable and Connector Specification v1.2.
> +
> +maintainers:
> +  - Cixi Geng <gengcixi@gmail.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - sprd,sc2730-typec
> +      - sprd,sc2721-typec

Order alphabetically, please.

> +      - sprd,ump96xx-typec
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  sprd,mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      The Type-C port mode type

This does not look appropriate. You need to use usb-connector.yaml and
its power-role property. Check existing examples.

Even without usb-connector.yaml schema, you should not hard-code some
magical 32-bit unknown numbers without any documented meaning (bindings)...

> +
> +  nvmem-cells:
> +    maxItems: 2
> +    description:
> +      Reference to an nvmem node for the calibration data.
> +
> +  nvmem-cell-names:
> +    items:
> +      - const: typec_cc1_cal
> +      - const: typec_cc2_cal
> +
> +required:
> +  - compatible
> +  - reg
> +  - sprd,mode
> +  - nvmem-cells
> +  - nvmem-cell-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pmic {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pmic_typec: typec@380 {
> +                compatible = "sprd,sc2730-typec";
> +                interrupt-parent = <&sc2730_pmic>;
> +                interrupts = <8>;
> +                reg = <0x380>;

Put reg just after compatible.

> +                sprd,mode = <2>;
> +                nvmem-cells = <&typec_cc1_cal>, <&typec_cc2_cal>;
> +                nvmem-cell-names = "typec_cc1_cal", "typec_cc2_cal";
> +                status = "okay";

Examples do not have status. No point.

> +        };
> +    };
> +...


Best regards,
Krzysztof