From: Krishna Chaitanya Chundru <quic_krichai@quicinc.com>
To: Georgi Djakov <djakov@kernel.org>, <manivannan.sadhasivam@linaro.org>
Cc: quic_vbadigan@quicinc.com, quic_ramkri@quicinc.com,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"open list:PCIE ENDPOINT DRIVER FOR QUALCOMM"
<linux-pci@vger.kernel.org>,
"open list:PCIE ENDPOINT DRIVER FOR QUALCOMM"
<linux-arm-msm@vger.kernel.org>,
"open list" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] PCI: qcom-ep: Add ICC bandwidth voting support
Date: Wed, 7 Jun 2023 21:49:18 +0530 [thread overview]
Message-ID: <6442f4aa-d077-845c-34f8-d52f29b0d0e1@quicinc.com> (raw)
In-Reply-To: <903bf7c5-1665-4602-a7ba-f4a0741e720f@kernel.org>
On 6/6/2023 4:18 PM, Georgi Djakov wrote:
> Hi Krishna,
>
> Thanks for the patch!
>
> On 6.06.23 8:49, Krishna chaitanya chundru wrote:
>> Add support to vote for ICC bandwidth based up on the link
>> speed and width.
>>
>> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
>> ---
>> drivers/pci/controller/dwc/pcie-qcom-ep.c | 73
>> +++++++++++++++++++++++++++++++
>> 1 file changed, 73 insertions(+)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c
>> b/drivers/pci/controller/dwc/pcie-qcom-ep.c
>> index 19b3283..79e7559 100644
>> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
>> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
>> @@ -17,6 +17,7 @@
>> #include <linux/phy/pcie.h>
>> #include <linux/phy/phy.h>
>> #include <linux/platform_device.h>
>> +#include <linux/interconnect.h>
>> #include <linux/pm_domain.h>
>> #include <linux/regmap.h>
>> #include <linux/reset.h>
>> @@ -28,6 +29,7 @@
>> #define PARF_SYS_CTRL 0x00
>> #define PARF_DB_CTRL 0x10
>> #define PARF_PM_CTRL 0x20
>> +#define PARF_PM_STTS 0x24
>> #define PARF_MHI_CLOCK_RESET_CTRL 0x174
>> #define PARF_MHI_BASE_ADDR_LOWER 0x178
>> #define PARF_MHI_BASE_ADDR_UPPER 0x17c
>> @@ -128,6 +130,9 @@
>> /* DBI register fields */
>> #define DBI_CON_STATUS_POWER_STATE_MASK GENMASK(1, 0)
>> +#define DBI_LINKCTRLSTATUS 0x80
>> +#define DBI_LINKCTRKSTATUS_SHIFT 16
>> +
>> #define XMLH_LINK_UP 0x400
>> #define CORE_RESET_TIME_US_MIN 1000
>> #define CORE_RESET_TIME_US_MAX 1005
>> @@ -187,6 +192,8 @@ struct qcom_pcie_ep {
>> enum qcom_pcie_ep_link_status link_status;
>> int global_irq;
>> int perst_irq;
>> +
>> + struct icc_path *icc;
>> };
>> static int qcom_pcie_ep_core_reset(struct qcom_pcie_ep *pcie_ep)
>> @@ -253,9 +260,56 @@ static void qcom_pcie_dw_stop_link(struct
>> dw_pcie *pci)
>> disable_irq(pcie_ep->perst_irq);
>> }
>> +static void qcom_pcie_icc_update(struct qcom_pcie_ep *pcie_ep)
>> +{
>> + struct dw_pcie *pci = &pcie_ep->pci;
>> + u32 val, bw;
>> + int speed, width;
>> + int ret;
>> +
>> + if (!pcie_ep->icc)
>> + return;
>> +
>> + val = dw_pcie_readl_dbi(pci, DBI_LINKCTRLSTATUS);
>> + val = val >> DBI_LINKCTRKSTATUS_SHIFT;
>> +
>> + speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, val);
>> + width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val);
>> +
>> + /*
>> + * ICC needs avg bw in KBps.
>> + *
>> + * For example for 2Gbps the avg BW = 2x1000x1000x1000/8*1000 =
>> 250000
>> + */
>> + switch (speed) {
>> + case 1:
>> + bw = 250000; /* avg bw for GEN1 per lane: 2Gbps, peak bw:
>> no vote */
>> + break;
>> + case 2:
>> + bw = 500000; /* avg bw for GEN2 per lane: 4Gbps, peak bw
>> no vote */
>> + break;
>> + case 3:
>> + bw = 1000000; /* avg bw for GEN3 per lane: 8Gbps, peak bw
>> no vote */
>> + break;
>> + default:
>> + WARN_ON_ONCE(1);
>> + fallthrough;
>> + case 4:
>> + bw = 2000000; /* avg bw for GEN4 per lane: 16Gbps, peak
>> bw no vote */
>> + break;
>> + }
>> +
>> + ret = icc_set_bw(pcie_ep->icc, width * bw, 0);
>
> Here you should use a non-zero value for peak bandwidth. You can use
> the average value also as peak. There are some existing macros like
> GBps_to_icc(). Please use them.
updated the logic in the new patch.
>
>> + if (ret) {
>> + dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
>> + ret);
>> + }
>> +}
>> +
>> static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep)
>> {
>> int ret;
>> + struct dw_pcie *pci = &pcie_ep->pci;
>> ret = clk_bulk_prepare_enable(pcie_ep->num_clks, pcie_ep->clks);
>> if (ret)
>> @@ -277,6 +331,20 @@ static int qcom_pcie_enable_resources(struct
>> qcom_pcie_ep *pcie_ep)
>> if (ret)
>> goto err_phy_exit;
>> + /*
>> + * Some Qualcomm platforms require interconnect bandwidth
>> constraints
>> + * to be set before enabling interconnect clocks.
>> + *
>> + * Set an initial average bandwidth corresponding to single-lane
>> Gen 1
>> + * for the pcie to mem path.
>> + */
>> + ret = icc_set_bw(pcie_ep->icc, 250000, 0); /* avg bw: 2Gbps,
>> peak bw: no vote */
>
> Ditto.
>
done
>> + if (ret) {
>> + dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
>> + ret);
>> + goto err_phy_exit;
>> + }
>> +
>> return 0;
>> err_phy_exit:
>> @@ -550,6 +618,10 @@ static int qcom_pcie_ep_get_resources(struct
>> platform_device *pdev,
>> if (IS_ERR(pcie_ep->phy))
>> ret = PTR_ERR(pcie_ep->phy);
>> + pcie_ep->icc = devm_of_icc_get(dev, "pci");
>
> Is this "pci" path documented in the bindings?
>
> Thanks,
> Georgi
>
Added the bindings patch in new patch
Thanks,
Krishna Chaitanya.
>> + if (IS_ERR(pcie_ep->icc))
>> + ret = PTR_ERR(pcie_ep->icc);
>> +
>> return ret;
>> }
>> @@ -572,6 +644,7 @@ static irqreturn_t
>> qcom_pcie_ep_global_irq_thread(int irq, void *data)
>> } else if (FIELD_GET(PARF_INT_ALL_BME, status)) {
>> dev_dbg(dev, "Received BME event. Link is enabled!\n");
>> pcie_ep->link_status = QCOM_PCIE_EP_LINK_ENABLED;
>> + qcom_pcie_icc_update(pcie_ep);
>> } else if (FIELD_GET(PARF_INT_ALL_PM_TURNOFF, status)) {
>> dev_dbg(dev, "Received PM Turn-off event! Entering L23\n");
>> val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);
>
next prev parent reply other threads:[~2023-06-07 16:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-06 5:49 Krishna chaitanya chundru
2023-06-06 10:48 ` Georgi Djakov
2023-06-07 16:19 ` Krishna Chaitanya Chundru [this message]
2023-06-06 11:24 ` Manivannan Sadhasivam
2023-06-07 16:22 ` Krishna Chaitanya Chundru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6442f4aa-d077-845c-34f8-d52f29b0d0e1@quicinc.com \
--to=quic_krichai@quicinc.com \
--cc=bhelgaas@google.com \
--cc=djakov@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=quic_ramkri@quicinc.com \
--cc=quic_vbadigan@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®