mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To: Rob Herring <robh@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Sebastian Reichel <sre@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH 4/4] dt-bindings: mfd: maxim,max14577: convert to dtschema
Date: Tue, 11 Jan 2022 18:19:50 +0100	[thread overview]
Message-ID: <64649172-e32c-2d1a-9c12-aed562071876@canonical.com> (raw)
In-Reply-To: <YdyMiHcyKNHipYCE@robh.at.kernel.org>

On 10/01/2022 20:44, Rob Herring wrote:
> On Wed, Dec 29, 2021 at 03:15:24PM +0100, Krzysztof Kozlowski wrote:
>> Convert the MFD part of Maxim MAX14577/MAX77836 MUIC to DT schema
>> format.  The example DTS was copied from existing DTS
>> (exynos3250-rinato.dts), so keep the license as GPL-2.0-only.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>> ---
>>  .../devicetree/bindings/mfd/max14577.txt      | 147 -------------
>>  .../bindings/mfd/maxim,max14577.yaml          | 195 ++++++++++++++++++
>>  MAINTAINERS                                   |   2 +-
>>  3 files changed, 196 insertions(+), 148 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
>>  create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
>> deleted file mode 100644
>> index be11943a0560..000000000000
>> --- a/Documentation/devicetree/bindings/mfd/max14577.txt
>> +++ /dev/null
>> @@ -1,147 +0,0 @@
>> -Maxim MAX14577/77836 Multi-Function Device
>> -
>> -MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
>> -Battery Charger and SFOUT LDO output for powering USB devices. It is
>> -interfaced to host controller using I2C.
>> -
>> -MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
>> -For the description of Fuel Gauge low SOC alert interrupt see:
>> -../power/supply/max17040_battery.txt
>> -
>> -
>> -Required properties:
>> -- compatible : Must be "maxim,max14577" or "maxim,max77836".
>> -- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
>> -- interrupts : IRQ line for the chip.
>> -
>> -
>> -Required nodes:
>> - - charger :
>> -	Node for configuring the charger driver.
>> -	Required properties:
>> -		- compatible : "maxim,max14577-charger"
>> -			or "maxim,max77836-charger"
>> -		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
>> -			Valid values:
>> -			- for max14577: 90000 - 950000;
>> -			- for max77836: 45000 - 475000;
>> -		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
>> -			Valid values:
>> -			- for max14577: 50000 - 200000;
>> -			- for max77836: 5000 - 100000;
>> -		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
>> -			In an overvoltage condition, INT asserts and charging
>> -			stops. Valid values:
>> -			- 6000000, 6500000, 7000000, 7500000;
>> -		- maxim,constant-uvolt : Battery Constant Voltage in uV;
>> -			Valid values:
>> -			- 4000000 - 4280000 (step by 20000);
>> -			- 4350000;
>> -
>> -
>> -Optional nodes:
>> -- max14577-muic/max77836-muic :
>> -	Node used only by extcon consumers.
>> -	Required properties:
>> -		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
>> -
>> -- regulators :
>> -	Required properties:
>> -		- compatible : "maxim,max14577-regulator"
>> -			or "maxim,max77836-regulator"
>> -
>> -	May contain a sub-node per regulator from the list below. Each
>> -	sub-node should contain the constraints and initialization information
>> -	for that regulator. See regulator.txt for a description of standard
>> -	properties for these sub-nodes.
>> -
>> -	List of valid regulator names:
>> -	- for max14577: CHARGER, SAFEOUT.
>> -	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
>> -
>> -	The SAFEOUT is a fixed voltage regulator so there is no need to specify
>> -	voltages for it.
>> -
>> -
>> -Example:
>> -
>> -#include <dt-bindings/interrupt-controller/irq.h>
>> -
>> -max14577@25 {
>> -	compatible = "maxim,max14577";
>> -	reg = <0x25>;
>> -	interrupt-parent = <&gpx1>;
>> -	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
>> -
>> -	muic: max14577-muic {
>> -		compatible = "maxim,max14577-muic";
>> -	};
>> -
>> -	regulators {
>> -		compatible = "maxim,max14577-regulator";
>> -
>> -		SAFEOUT {
>> -			regulator-name = "SAFEOUT";
>> -		};
>> -		CHARGER {
>> -			regulator-name = "CHARGER";
>> -			regulator-min-microamp = <90000>;
>> -			regulator-max-microamp = <950000>;
>> -			regulator-boot-on;
>> -		};
>> -	};
>> -
>> -	charger {
>> -		compatible = "maxim,max14577-charger";
>> -
>> -		maxim,constant-uvolt = <4350000>;
>> -		maxim,fast-charge-uamp = <450000>;
>> -		maxim,eoc-uamp = <50000>;
>> -		maxim,ovp-uvolt = <6500000>;
>> -	};
>> -};
>> -
>> -
>> -max77836@25 {
>> -	compatible = "maxim,max77836";
>> -	reg = <0x25>;
>> -	interrupt-parent = <&gpx1>;
>> -	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
>> -
>> -	muic: max77836-muic {
>> -		compatible = "maxim,max77836-muic";
>> -	};
>> -
>> -	regulators {
>> -		compatible = "maxim,max77836-regulator";
>> -
>> -		SAFEOUT {
>> -			regulator-name = "SAFEOUT";
>> -		};
>> -		CHARGER {
>> -			regulator-name = "CHARGER";
>> -			regulator-min-microamp = <90000>;
>> -			regulator-max-microamp = <950000>;
>> -			regulator-boot-on;
>> -		};
>> -		LDO1 {
>> -			regulator-name = "LDO1";
>> -			regulator-min-microvolt = <2700000>;
>> -			regulator-max-microvolt = <2700000>;
>> -		};
>> -		LDO2 {
>> -			regulator-name = "LDO2";
>> -			regulator-min-microvolt = <800000>;
>> -			regulator-max-microvolt = <3950000>;
>> -		};
>> -	};
>> -
>> -	charger {
>> -		compatible = "maxim,max77836-charger";
>> -
>> -		maxim,constant-uvolt = <4350000>;
>> -		maxim,fast-charge-uamp = <225000>;
>> -		maxim,eoc-uamp = <7500>;
>> -		maxim,ovp-uvolt = <6500000>;
>> -	};
>> -};
>> diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
>> new file mode 100644
>> index 000000000000..512fd671595c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
>> @@ -0,0 +1,195 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC
>> +
>> +maintainers:
>> +  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>> +
>> +description: |
>> +  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
>> +  Integrated Circuit (MUIC).
>> +
>> +  The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which
>> +  includes voltage safeout regulators, charger and MicroUSB management IC.
>> +
>> +  The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which
>> +  includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB
>> +  management IC.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - maxim,max14577
>> +      - maxim,max77836
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  wakeup-source: true
>> +
>> +  charger:
>> +    $ref: ../power/supply/maxim,max14577.yaml
> 
> /schemas/power/...
> 
> With those fixed,
> 
> Reviewed-by: Rob Herring <robh@kernel.org>

Thanks, fixed also regulator reference below and the regulator bindings
as in my other Maxim patches.


Best regards,
Krzysztof

      reply	other threads:[~2022-01-11 17:20 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-29 14:15 [PATCH 0/4] mfd/power/regulators: dt-bindings: max14577: " Krzysztof Kozlowski
2021-12-29 14:15 ` [PATCH 1/4] ARM: dts: exynos: Align MAX77836 nodes with dtschema on Monk and Rinato Krzysztof Kozlowski
2021-12-29 14:15 ` [PATCH 2/4] dt-bindings: power: supply: maxim,max14577: convert to dtschema Krzysztof Kozlowski
2022-01-10 19:42   ` Rob Herring
2021-12-29 14:15 ` [PATCH 3/4] regulator: dt-bindings: " Krzysztof Kozlowski
2021-12-29 14:15 ` [PATCH 4/4] dt-bindings: mfd: " Krzysztof Kozlowski
2022-01-10 19:44   ` Rob Herring
2022-01-11 17:19     ` Krzysztof Kozlowski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=64649172-e32c-2d1a-9c12-aed562071876@canonical.com \
    --to=krzysztof.kozlowski@canonical.com \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®