mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Wainer dos Santos Moschetta <wainersm@redhat.com>
To: Andrew Jones <drjones@redhat.com>
Cc: pbonzini@redhat.com, kvm@vger.kernel.org, david@redhat.com,
	linux-kernel@vger.kernel.org, linux-kselftest@vger.kernel.org
Subject: Re: [PATCH v2 2/2] selftests: kvm: Add mem_slot_test test
Date: Mon, 6 Apr 2020 14:10:53 -0300	[thread overview]
Message-ID: <64a47faa-74f5-60ad-9b74-8c295072c719@redhat.com> (raw)
In-Reply-To: <20200404073240.grcsylznemd3pmxz@kamzik.brq.redhat.com>


On 4/4/20 4:32 AM, Andrew Jones wrote:
> On Fri, Apr 03, 2020 at 02:24:28PM -0300, Wainer dos Santos Moschetta wrote:
>> This patch introduces the mem_slot_test test which checks
>> an VM can have added memory slots up to the limit defined in
>> KVM_CAP_NR_MEMSLOTS. Then attempt to add one more slot to
>> verify it fails as expected.
>>
>> Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
>> ---
>>   tools/testing/selftests/kvm/.gitignore      |  1 +
>>   tools/testing/selftests/kvm/Makefile        |  3 +
>>   tools/testing/selftests/kvm/mem_slot_test.c | 85 +++++++++++++++++++++
>>   3 files changed, 89 insertions(+)
>>   create mode 100644 tools/testing/selftests/kvm/mem_slot_test.c
>>
>> diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore
>> index 16877c3daabf..232f24d6931a 100644
>> --- a/tools/testing/selftests/kvm/.gitignore
>> +++ b/tools/testing/selftests/kvm/.gitignore
>> @@ -22,3 +22,4 @@
>>   /dirty_log_test
>>   /kvm_create_max_vcpus
>>   /steal_time
>> +/mem_slot_test
>> diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile
>> index 712a2ddd2a27..69b44178f48b 100644
>> --- a/tools/testing/selftests/kvm/Makefile
>> +++ b/tools/testing/selftests/kvm/Makefile
>> @@ -33,12 +33,14 @@ TEST_GEN_PROGS_x86_64 += demand_paging_test
>>   TEST_GEN_PROGS_x86_64 += dirty_log_test
>>   TEST_GEN_PROGS_x86_64 += kvm_create_max_vcpus
>>   TEST_GEN_PROGS_x86_64 += steal_time
>> +TEST_GEN_PROGS_x86_64 += mem_slot_test
>>   
>>   TEST_GEN_PROGS_aarch64 += clear_dirty_log_test
>>   TEST_GEN_PROGS_aarch64 += demand_paging_test
>>   TEST_GEN_PROGS_aarch64 += dirty_log_test
>>   TEST_GEN_PROGS_aarch64 += kvm_create_max_vcpus
>>   TEST_GEN_PROGS_aarch64 += steal_time
>> +TEST_GEN_PROGS_aarch64 += mem_slot_test
>>   
> kvm selftests has a bad case of OCD when it comes to lists of tests. In
> the .gitignore and the Makefile we keep our tests in alphabetical order.
> Maybe we should stop, because it's a bit annoying to maintain, but my
> personal OCD won't allow it to be on my watch. Please fix the above
> three lists.

I will fix it on v3.

Kind of related... has ever been discussed a naming convention for kvm 
selftests? It would allow the use of regex on both .gitignore and 
Makefile...and bye-bye those sorted lists.


>
>>   TEST_GEN_PROGS_s390x = s390x/memop
>>   TEST_GEN_PROGS_s390x += s390x/resets
>> @@ -46,6 +48,7 @@ TEST_GEN_PROGS_s390x += s390x/sync_regs_test
>>   TEST_GEN_PROGS_s390x += demand_paging_test
>>   TEST_GEN_PROGS_s390x += dirty_log_test
>>   TEST_GEN_PROGS_s390x += kvm_create_max_vcpus
>> +TEST_GEN_PROGS_s390x += mem_slot_test
>>   
>>   TEST_GEN_PROGS += $(TEST_GEN_PROGS_$(UNAME_M))
>>   LIBKVM += $(LIBKVM_$(UNAME_M))
>> diff --git a/tools/testing/selftests/kvm/mem_slot_test.c b/tools/testing/selftests/kvm/mem_slot_test.c
>> new file mode 100644
>> index 000000000000..eef6f506f41d
>> --- /dev/null
>> +++ b/tools/testing/selftests/kvm/mem_slot_test.c
>> @@ -0,0 +1,85 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * mem_slot_test
>> + *
>> + * Copyright (C) 2020, Red Hat, Inc.
>> + *
>> + * Test suite for memory region operations.
>> + */
>> +#define _GNU_SOURCE /* for program_invocation_short_name */
>> +#include <linux/kvm.h>
>> +#include <sys/mman.h>
>> +
>> +#include "test_util.h"
>> +#include "kvm_util.h"
>> +
>> +/*
>> + * Test it can be added memory slots up to KVM_CAP_NR_MEMSLOTS, then any
>> + * tentative to add further slots should fail.
>> + */
>> +static void test_add_max_slots(void)
>> +{
>> +	struct kvm_vm *vm;
>> +	uint32_t max_mem_slots;
>> +	uint32_t slot;
>> +	uint64_t mem_reg_npages;
>> +	uint64_t mem_reg_size;
>> +	uint32_t mem_reg_flags;
>> +	uint64_t guest_addr;
>> +	int ret;
>> +
>> +	max_mem_slots = kvm_check_cap(KVM_CAP_NR_MEMSLOTS);
>> +	TEST_ASSERT(max_mem_slots > 0,
>> +		    "KVM_CAP_NR_MEMSLOTS should be greater than 0");
>> +	pr_info("Allowed number of memory slots: %i\n", max_mem_slots);
>> +
>> +	vm = vm_create(VM_MODE_DEFAULT, 0, O_RDWR);
>> +
>> +	/*
>> +	 * Uses 1MB sized/aligned memory region since this is the minimal
>> +	 * required on s390x.
>> +	 */
>> +	mem_reg_size = 0x100000;
>> +	mem_reg_npages = vm_calc_num_guest_pages(VM_MODE_DEFAULT, mem_reg_size);
>> +
>> +	mem_reg_flags = kvm_check_cap(KVM_CAP_READONLY_MEM) ? KVM_MEM_READONLY :
>> +		KVM_MEM_LOG_DIRTY_PAGES;
> I still don't see why we're setting a flag at all, and now we're setting
> different flags depending on what's available, so the test isn't the
> same for every environment. I would just have mem->flags = 0 for this
> test.
I thought I had to set a memory flag always. If mem->flags = 0 works 
across the arches, then I change this on v3.
>
>> +
>> +	guest_addr = 0x0;
>> +
>> +	/* Check it can be added memory slots up to the maximum allowed */
>> +	pr_info("Adding slots 0..%i, each memory region with %ldK size\n",
>> +		(max_mem_slots - 1), mem_reg_size >> 10);
>> +	for (slot = 0; slot < max_mem_slots; slot++) {
>> +		vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS,
>> +					    guest_addr, slot, mem_reg_npages,
>> +					    mem_reg_flags);
>> +		guest_addr += mem_reg_size;
>> +	}
>> +
>> +	/* Check it cannot be added memory slots beyond the limit */
>> +	void *mem = mmap(NULL, mem_reg_size, PROT_READ | PROT_WRITE,
>> +			 MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
>> +	TEST_ASSERT(mem != NULL, "Failed to mmap() host");
> This should be testing mem != MAP_FAILED

Ok.

>
>> +
>> +	struct kvm_userspace_memory_region kvm_region = {
>> +		.slot = slot,
>> +		.flags = mem_reg_flags,
>> +		.guest_phys_addr = guest_addr,
>> +		.memory_size = mem_reg_size,
>> +		.userspace_addr = (uint64_t) mem,
>> +	};
> Declaring kvm_region in the middle of the block. I don't really care
> myself, but it's inconsistent with all the other variables which are
> declared at the top.

Makes sense.

>
>> +
>> +	ret = ioctl(vm_get_fd(vm), KVM_SET_USER_MEMORY_REGION, &kvm_region);
>> +	TEST_ASSERT(ret == -1, "Adding one more memory slot should fail");
>> +	TEST_ASSERT(errno == EINVAL, "Should return EINVAL errno");
> Please make the second assert message more specific. Or better would be
> to combine the asserts
>
>    TEST_ASSERT(ret == -1 && errno == EINVAL, "Adding one more memory slot should fail with EINVAL");

Yeah, I was unsure about and'ing the checks. I will change it on v3.

Thanks!

Wainer

>
>> +
>> +	munmap(mem, mem_reg_size);
>> +	kvm_vm_free(vm);
>> +}
>> +
>> +int main(int argc, char *argv[])
>> +{
>> +	test_add_max_slots();
>> +	return 0;
>> +}
>> -- 
>> 2.17.2
>>
> Thanks,
> drew


  reply	other threads:[~2020-04-06 17:11 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-03 17:24 [PATCH v2 0/2] selftests: kvm: Introduce the " Wainer dos Santos Moschetta
2020-04-03 17:24 ` [PATCH v2 1/2] selftests: kvm: Add vm_get_fd() in kvm_util Wainer dos Santos Moschetta
2020-04-04  7:04   ` Andrew Jones
2020-04-03 17:24 ` [PATCH v2 2/2] selftests: kvm: Add mem_slot_test test Wainer dos Santos Moschetta
2020-04-04  7:32   ` Andrew Jones
2020-04-06 17:10     ` Wainer dos Santos Moschetta [this message]
2020-04-07  8:32       ` Andrew Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=64a47faa-74f5-60ad-9b74-8c295072c719@redhat.com \
    --to=wainersm@redhat.com \
    --cc=david@redhat.com \
    --cc=drjones@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®