From: "Torsten Kaiser" <just.for.lkml@googlemail.com>
To: "Andrew Morton" <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: 2.6.23-mm1
Date: Sat, 13 Oct 2007 10:01:05 +0200 [thread overview]
Message-ID: <64bb37e0710130101y7fb8e4c0lf214fd821e8305ed@mail.gmail.com> (raw)
In-Reply-To: <20071012013729.ada2127b.akpm@linux-foundation.org>
On 10/12/07, Andrew Morton <akpm@linux-foundation.org> wrote:
> On Fri, 12 Oct 2007 10:31:42 +0200 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > Oct 12 10:23:03 treogen smartd[6091]: Device: /dev/sdc, not found in
> > smartd database.
>
> hm.
>
> > Oct 12 10:23:03 treogen [ 105.990000] WARNING: at
> > drivers/ata/libata-core.c:5752 ata_qc_issue()
>
> Let's cc linux-ide.
>
> > Oct 12 10:23:03 treogen [ 105.990000]
> > Oct 12 10:23:03 treogen [ 105.990000] Call Trace:
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804442ef>]
> > ata_qc_issue+0x47f/0x540
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80432e60>] scsi_done+0x0/0x20
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80449c80>]
> > ata_scsi_flush_xlat+0x0/0x30
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8044a6ea>]
> > ata_scsi_translate+0xfa/0x180
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80432e60>] scsi_done+0x0/0x20
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8044d84d>]
> > ata_scsi_queuecmd+0x12d/0x210
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804333d0>]
> > scsi_dispatch_cmd+0x150/0x250
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804391f1>]
> > scsi_request_fn+0x1f1/0x360
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8039b827>]
> > elv_insert+0x167/0x250
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff803a0ac2>]
> > __make_request+0xe2/0x670
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8039d560>]
> > generic_make_request+0x1d0/0x3c0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff802bc1b9>]
> > bio_alloc_bioset+0xb9/0x140
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff802bc061>]
> > __bio_clone+0x91/0xc0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8039d7b6>]
> > submit_bio+0x66/0xf0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804cc06e>]
> > write_page+0x16e/0x2c0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80231b01>]
> > dequeue_task_fair+0x51/0xb0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804c482d>]
> > md_update_sb+0x18d/0x320
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804c9065>]
> > md_check_recovery+0x1f5/0x550
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804bf1d3>] raid5d+0x23/0x490
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8023eb12>]
> > try_to_del_timer_sync+0x52/0x60
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff805b0057>]
> > schedule_timeout+0x67/0xd0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8023e740>]
> > process_timeout+0x0/0x10
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff805b004a>]
> > schedule_timeout+0x5a/0xd0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa40>]
> > md_thread+0x30/0x100
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8024a710>]
> > autoremove_wake_function+0x0/0x30
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8024a32b>] kthread+0x4b/0x80
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8020c9d8>] child_rip+0xa/0x12
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8024a2e0>] kthread+0x0/0x80
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8020c9ce>] child_rip+0x0/0x12
> > Oct 12 10:23:03 treogen [ 105.990000]
> > Oct 12 10:23:13 treogen [ 115.940000] ata3.00: exception Emask 0x0
> > SAct 0x0 SErr 0x0 action 0x2 frozen
> > Oct 12 10:23:13 treogen [ 115.940000] ata3.00: cmd
> > b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
> > Oct 12 10:23:13 treogen [ 115.940000] res
> > 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
> > Oct 12 10:23:13 treogen [ 115.940000] ata3.00: status: { DRDY }
> > Oct 12 10:23:14 treogen [ 116.270000] ata3: soft resetting link
> > Oct 12 10:23:14 treogen [ 116.430000] ata3: SATA link up 3.0 Gbps
> > (SStatus 123 SControl 300)
> > Oct 12 10:23:14 treogen [ 116.740000] ata3.00: configured for UDMA/133
> > Oct 12 10:23:14 treogen [ 116.740000] ata3: EH complete
> > Oct 12 10:23:14 treogen [ 116.740000] WARNING: at
> > drivers/ata/libata-core.c:5752 ata_qc_issue()
> > Oct 12 10:23:14 treogen [ 116.740000]
> > Oct 12 10:23:14 treogen [ 116.740000] Call Trace:
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff804442ef>]
> > ata_qc_issue+0x47f/0x540
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80432e60>] scsi_done+0x0/0x20
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80449c80>]
> > ata_scsi_flush_xlat+0x0/0x30
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8044a6ea>]
> > ata_scsi_translate+0xfa/0x180
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80432e60>] scsi_done+0x0/0x20
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8044d84d>]
> > ata_scsi_queuecmd+0x12d/0x210
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff804333d0>]
> > scsi_dispatch_cmd+0x150/0x250
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff804391f1>]
> > scsi_request_fn+0x1f1/0x360
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80436b80>]
> > scsi_error_handler+0x0/0x310
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8039fe73>]
> > blk_run_queue+0x43/0x80
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80438659>]
> > scsi_run_host_queues+0x19/0x40
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80436d54>]
> > scsi_error_handler+0x1d4/0x310
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80436b80>]
> > scsi_error_handler+0x0/0x310
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8024a32b>] kthread+0x4b/0x80
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8020c9d8>] child_rip+0xa/0x12
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8024a2e0>] kthread+0x0/0x80
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8020c9ce>] child_rip+0x0/0x12
> > Oct 12 10:23:14 treogen [ 116.740000]
> > Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] 625142448
> > 512-byte hardware sectors (320073 MB)
> > Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] Write Protect is off
> > Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> > Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] Write cache:
> > enabled, read cache: enabled, doesn't support DPO or FUA
> > Oct 12 10:23:24 treogen [ 126.740000] ata3.00: exception Emask 0x0
> > SAct 0x0 SErr 0x0 action 0x2 frozen
> > Oct 12 10:23:24 treogen [ 126.740000] ata3.00: cmd
> > b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
> > Oct 12 10:23:24 treogen [ 126.740000] res
> > 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
> > Oct 12 10:23:24 treogen [ 126.740000] ata3.00: status: { DRDY }
> > Oct 12 10:23:24 treogen [ 127.070000] ata3: soft resetting link
> > Oct 12 10:23:25 treogen [ 127.230000] ata3: SATA link up 3.0 Gbps
> > (SStatus 123 SControl 300)
> > Oct 12 10:23:25 treogen [ 127.370000] ata3.00: configured for UDMA/133
> > Oct 12 10:23:25 treogen [ 127.370000] ata3: EH complete
> > Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] 625142448
> > 512-byte hardware sectors (320073 MB)
> > Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] Write Protect is off
> > Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> > Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] Write cache:
> > enabled, read cache: enabled, doesn't support DPO or FUA
> > Oct 12 10:23:25 treogen smartd[6091]: Device: /dev/sdc, is SMART
> > capable. Adding to "monitor" list.
> > ... but I can still access the filesystem and the RAID device on that drive.
> > (sdc is MAXTOR STM332082 3.AA sata-drive on a MCP55 using sata_nv with
> > swncq activated)
> >
> > Torsten
>
On the next boot no WARNING show up.
On the third boot with 2.6.23-mm1 the drive failed completely:
First I got this WARNING:
Oct 13 07:46:48 treogen smartd[6081]: Device: /dev/sdc, opened
Oct 13 07:46:48 treogen [ 99.850000] WARNING: at
drivers/ata/libata-core.c:5761 ata_qc_issue()
Oct 13 07:46:48 treogen [ 99.850000]
Oct 13 07:46:48 treogen [ 99.850000] Call Trace:
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8044431a>]
ata_qc_issue+0x4aa/0x540
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8044ce30>]
ata_scsi_pass_thru+0x0/0x2c0
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8044d84d>]
ata_scsi_queuecmd+0x12d/0x210
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff804333d0>]
scsi_dispatch_cmd+0x150/0x250
Oct 13 07:46:48 treogen smartd[6081]: Device: /dev/sdc, not found in
smartd database.
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff804391f1>]
scsi_request_fn+0x1f1/0x360
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8039f362>]
blk_execute_rq_nowait+0x62/0xb0
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8039f446>]
blk_execute_rq+0x96/0x110
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8039f5b1>]
get_request_wait+0x21/0x1a0
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8022c8ea>]
__wake_up_common+0x5a/0x90
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff80438e14>]
scsi_execute+0xe4/0x120
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8044cb14>]
ata_cmd_ioctl+0x124/0x270
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8044cd67>]
ata_scsi_ioctl+0x107/0x1d0
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8043424c>]
scsi_ioctl+0xbc/0x330
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff803a14f3>]
blkdev_driver_ioctl+0x93/0xa0
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff803a1766>]
blkdev_ioctl+0x266/0x7c0
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8022c8ea>]
__wake_up_common+0x5a/0x90
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8022c8ea>]
__wake_up_common+0x5a/0x90
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8022d543>] __wake_up+0x43/0x70
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff802babba>]
invalidate_inode_buffers+0x2a/0x100
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8024a5e0>]
bit_waitqueue+0x10/0xd0
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff802bd08b>]
block_ioctl+0x1b/0x30
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff802a08bf>] do_ioctl+0x2f/0xa0
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff802a0b50>]
vfs_ioctl+0x220/0x2d0
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff802a0c91>] sys_ioctl+0x91/0xb0
Oct 13 07:46:48 treogen [ 99.850000] [<ffffffff8020bbbe>]
system_call+0x7e/0x83
Oct 13 07:46:48 treogen [ 99.850000]
Oct 13 07:46:48 treogen [ 99.850000] ata3: EH in SWNCQ
mode,QC:qc_active 0x3 sactive 0x1
Oct 13 07:46:48 treogen [ 99.850000] ata3: SWNCQ:qc_active 0x1
defer_bits 0x0 last_issue_tag 0x0
Oct 13 07:46:48 treogen [ 99.850000] dhfis 0x1 dmafis 0x0 sdbfis 0x0
Oct 13 07:46:48 treogen [ 99.850000] ata3: ATA_REG 0x51 ERR_REG 0x4
Oct 13 07:46:48 treogen [ 99.850000] ata3: tag : dhfis dmafis sdbfis sacitve
Oct 13 07:46:48 treogen [ 99.850000] ata3: tag 0x0: 1 0 0 1
Oct 13 07:46:48 treogen [ 99.850000] ata3.00: exception Emask 0x1
SAct 0x1 SErr 0x0 action 0x6 frozen
Oct 13 07:46:48 treogen [ 99.850000] ata3.00: Ata error. fis:0x41
Oct 13 07:46:48 treogen [ 99.850000] ata3.00: cmd
60/30:00:d1:6b:db/00:00:18:00:00/40 tag 0 cdb 0x0 data 24576 in
Oct 13 07:46:48 treogen [ 99.850000] res
51/04:00:01:4f:c2/04:00:d1:6b:db/00 Emask 0x1 (device error)
Oct 13 07:46:48 treogen [ 99.850000] ata3.00: status: { DRDY ERR }
Oct 13 07:46:48 treogen [ 99.850000] ata3.00: error: { ABRT }
Oct 13 07:46:48 treogen [ 99.850000] ata3.00: cmd
b0/d8:00:01:4f:c2/00:00:00:00:00/00 tag 1 cdb 0x0 data 0
Oct 13 07:46:48 treogen [ 99.850000] res
51/04:00:01:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
Oct 13 07:46:48 treogen [ 99.850000] ata3.00: status: { DRDY ERR }
Oct 13 07:46:48 treogen [ 99.850000] ata3.00: error: { ABRT }
Oct 13 07:46:48 treogen [ 99.850000] ata3: hard resetting link
Oct 13 07:46:49 treogen [ 100.360000] ata3: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Oct 13 07:46:49 treogen [ 100.510000] ata3.00: configured for UDMA/133
Oct 13 07:46:49 treogen [ 100.510000] ata3: EH complete
then the other two WARNINGs again. (drivers/ata/libata-core.c:5752)
After that the drive is inaccessible.
The last now "good" kernel for this problem is probable
2.6.23-rc8-mm1. That version only had the sata_sil24-bug
(ata_sg_is_last). I only booted 2.6.23-rc8-mm2 one time and that one
try did not complete bootup. But was neither able to see the complete
OOPS or save it. And as I was still trying to find the other bug, I
did not investigate more.
Torsten
next prev parent reply other threads:[~2007-10-13 8:01 UTC|newest]
Thread overview: 139+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-12 4:31 2.6.23-mm1 Andrew Morton
2007-10-12 5:03 ` 2.6.23-mm1 KAMEZAWA Hiroyuki
2007-10-12 6:42 ` 2.6.23-mm1 Andrew Morton
2007-10-12 6:46 ` 2.6.23-mm1 Al Viro
2007-10-12 7:13 ` 2.6.23-mm1 Andrew Morton
2007-10-12 18:06 ` [PATCH net-2.6] uml: hard_header fix Stephen Hemminger
2007-10-12 19:04 ` 2.6.23-mm1 Al Viro
2007-10-12 19:47 ` 2.6.23-mm1 thread exit_group issue Mathieu Desnoyers
2007-10-12 20:01 ` Andrew Morton
2007-10-13 1:03 ` Andrew Morton
2007-10-13 11:48 ` Oleg Nesterov
2007-10-13 12:02 ` Oleg Nesterov
2007-10-13 17:49 ` Andrew Morton
2007-10-14 4:04 ` Mathieu Desnoyers
2007-10-12 7:25 ` 2.6.23-mm1 KAMEZAWA Hiroyuki
2007-10-12 8:36 ` 2.6.23-mm1 Sam Ravnborg
2007-10-12 8:31 ` 2.6.23-mm1 Torsten Kaiser
2007-10-12 8:37 ` 2.6.23-mm1 Andrew Morton
2007-10-12 12:46 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 8:01 ` Torsten Kaiser [this message]
2007-10-13 10:55 ` 2.6.23-mm1 Jeff Garzik
2007-10-13 12:03 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 12:19 ` 2.6.23-mm1 Jeff Garzik
2007-10-13 14:32 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 14:40 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 15:13 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 17:48 ` 2.6.23-mm1 Jeff Garzik
2007-10-13 18:05 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 18:18 ` 2.6.23-mm1 Andrew Morton
2007-10-13 18:35 ` 2.6.23-mm1 Torsten Kaiser
2007-10-14 11:54 ` 2.6.23-mm1 Torsten Kaiser
2007-10-14 18:39 ` 2.6.23-mm1 Andrew Morton
2007-10-14 19:12 ` 2.6.23-mm1 Torsten Kaiser
2007-10-14 19:26 ` 2.6.23-mm1 Andrew Morton
2007-10-14 19:40 ` 2.6.23-mm1 Torsten Kaiser
2007-10-14 22:03 ` 2.6.23-mm1 Milan Broz
2007-10-15 6:50 ` 2.6.23-mm1 Jens Axboe
2007-10-15 7:31 ` 2.6.23-mm1 Neil Brown
2007-10-15 7:45 ` 2.6.23-mm1 Jens Axboe
2007-10-13 18:41 ` 2.6.23-mm1 Jeff Garzik
2007-10-12 6:48 ` 2.6.23-mm1 Cedric Le Goater
2007-10-12 6:51 ` [PATCH] add missing parenthesis in cfe_writeblk() macro Mariusz Kozlowski
2007-10-12 7:44 ` 2.6.23-mm1 - build failure on axonram Kamalesh Babulal
2007-10-12 9:42 ` Build Failure (Was Re: 2.6.23-mm1) Dhaval Giani
2007-10-12 20:38 ` 2.6.23-mm1 Laurent Riffard
2007-10-12 21:00 ` 2.6.23-mm1 Andrew Morton
2007-10-13 9:29 ` [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io Laurent Riffard
2007-10-13 10:10 ` Jens Axboe
2007-10-14 13:09 ` Edward Shishkin
2007-10-15 16:13 ` 2.6.23-mm1 Zan Lynx
2007-10-12 21:32 ` 2.6.23-mm1 Rafael J. Wysocki
2007-10-15 16:09 ` 2.6.23-mm1 Mark Gross
2007-10-15 20:40 ` 2.6.23-mm1 Rafael J. Wysocki
2007-10-16 19:58 ` 2.6.23-mm1 Mark Gross
2007-10-16 20:28 ` 2.6.23-mm1 Rafael J. Wysocki
2007-10-16 23:31 ` 2.6.23-mm1 Mark Gross
2007-10-17 21:15 ` [PATCH] static initialization with blocking notifiers. was :wqRe: 2.6.23-mm1 Mark Gross
2007-10-17 17:21 ` [PATCH] static initialization and blocking notification for pm_qos... was 2.6.23-mm1 Mark Gross
2007-10-13 4:35 ` 2.6.23-mm1 - Build failure on rgmii Kamalesh Babulal
2007-10-13 4:44 ` 2.6.23-mm1 - build failure with advansys Kamalesh Babulal
2007-10-13 6:52 ` Andrew Morton
2007-10-18 0:07 ` Paul Mackerras
2007-10-18 1:48 ` Matthew Wilcox
2007-10-13 15:50 ` 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without Joseph Fannin
2007-10-13 17:22 ` Rafael J. Wysocki
2007-10-13 18:40 ` Joseph Fannin
2007-10-13 19:13 ` Rafael J. Wysocki
2007-10-14 19:47 ` Joseph Fannin
2007-10-14 20:20 ` Rafael J. Wysocki
2007-10-15 20:55 ` Rafael J. Wysocki
2007-10-16 17:29 ` Joseph Fannin
2007-10-13 17:12 ` 2.6.23-mm1 Gabriel C
2007-10-13 18:01 ` 2.6.23-mm1 Andrew Morton
2007-10-13 18:08 ` 2.6.23-mm1 Gabriel C
2007-10-15 16:28 ` 2.6.23-mm1 Dave Hansen
2007-10-13 17:58 ` Suspend Broken (Re: 2.6.23-mm1) Dhaval Giani
2007-10-13 18:33 ` Rafael J. Wysocki
2007-10-14 4:26 ` Dhaval Giani
2007-10-14 14:19 ` Rafael J. Wysocki
2007-10-13 22:11 ` [2.6.23-mm1] CONFIG_LOCALVERSION handling broken Tilman Schmidt
2007-10-17 20:27 ` Sam Ravnborg
2007-10-17 23:06 ` Tilman Schmidt
2007-10-27 15:19 ` Tilman Schmidt
2007-10-27 15:28 ` Sam Ravnborg
2007-10-14 22:34 ` 2.6.23-mm1: BUG in reiserfs_delete_xattrs Laurent Riffard
2007-10-15 8:40 ` Christoph Hellwig
2007-10-15 18:31 ` Jeff Mahoney
2007-10-15 20:06 ` Laurent Riffard
2007-10-15 20:23 ` Jeff Mahoney
2007-10-17 8:59 ` Christoph Hellwig
2007-10-17 8:58 ` Christoph Hellwig
2007-10-17 14:55 ` Jeff Mahoney
2007-10-15 19:51 ` Laurent Riffard
2007-10-15 6:18 ` [PATCH] Add irq protection in the percpu-counters cpu-hotplug-callback path Gautham R Shenoy
2007-10-15 12:28 ` nfs mmap adventure (was: 2.6.23-mm1) Peter Zijlstra
2007-10-15 15:43 ` Trond Myklebust
2007-10-15 14:06 ` David Howells
2007-10-15 15:51 ` Trond Myklebust
2007-10-15 16:38 ` Peter Zijlstra
2007-10-15 23:27 ` David Howells
2007-10-16 1:46 ` Nick Piggin
2007-10-16 7:18 ` 2.6.23-mm1 - regression- PowerPC link failure at arch/powerpc/kernel/head_64.o Kamalesh Babulal
2007-10-16 7:28 ` Andrew Morton
2007-10-16 7:44 ` Kamalesh Babulal
2007-10-21 6:42 ` Kamalesh Babulal
2007-10-27 5:05 ` Stephen Rothwell
2007-10-17 7:01 ` 2.6.23-mm1 KAMEZAWA Hiroyuki
2007-10-17 9:02 ` 2.6.23-mm1 Andrew Morton
2007-10-17 9:10 ` 2.6.23-mm1 Jiri Kosina
2007-10-17 9:36 ` 2.6.23-mm1 KAMEZAWA Hiroyuki
2007-10-17 11:42 ` 2.6.23-mm1 Jiri Kosina
2007-10-17 12:33 ` 2.6.23-mm1 KAMEZAWA Hiroyuki
2007-10-19 9:07 ` PIE randomization (was Re: 2.6.23-mm1) Jiri Kosina
2007-10-19 21:54 ` 2.6.23-mm1 Jiri Kosina
2007-10-17 15:54 ` 2.6.23-mm1 - list_add corruption in cgroup Cedric Le Goater
2007-10-18 15:56 ` Paul Menage
2007-10-19 22:11 ` Paul Menage
2007-10-18 12:06 ` 2.6.23-mm1 - powerpc - Build fails at arch/powerpc/boot/inflate.o Kamalesh Babulal
2007-10-18 12:23 ` Paul Mackerras
2007-10-18 13:20 ` Kamalesh Babulal
2007-10-20 4:57 ` oops in lbmIODone, fails to boot [Re: 2.6.23-mm1] Mattia Dongili
2007-10-20 5:34 ` Andrew Morton
2007-10-20 12:18 ` Dave Kleikamp
2007-10-21 5:44 ` Mattia Dongili
2007-10-20 5:13 ` 2.6.23-mm1 - autofs broken Rik van Riel
2007-10-20 5:39 ` Andrew Morton
2007-10-20 5:54 ` Rik van Riel
2007-10-20 5:54 ` Rik van Riel
2007-10-20 14:56 ` Rik van Riel
2007-10-22 22:03 ` Dave Hansen
2007-10-22 3:45 ` Ian Kent
2007-10-22 16:46 ` Rik van Riel
2007-10-21 5:58 ` mysqld prevents s2ram [Re: 2.6.23-mm1] Mattia Dongili
2007-10-21 6:28 ` Mattia Dongili
2007-10-21 9:58 ` Pavel Machek
2007-10-21 11:53 ` Rafael J. Wysocki
2007-10-22 18:40 ` kernel panic when running tcpdump Mariusz Kozlowski
2007-10-22 19:03 ` Andrew Morton
2007-10-22 21:16 ` Mariusz Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=64bb37e0710130101y7fb8e4c0lf214fd821e8305ed@mail.gmail.com \
--to=just.for.lkml@googlemail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®