Re: [PATCH] serial: 8250_omap: Fix errors with no_console_suspend

[Thomas Richard <thomas.richard@bootlin.com>]

Hi Tony,

Thanks for the fix.

On 9/26/23 08:13, Tony Lindgren wrote:
> We now get errors on system suspend if no_console_suspend is set as
> reported by Thomas. The errors started with commit 20a41a62618d ("serial:
> 8250_omap: Use force_suspend and resume for system suspend").
> 
> Let's fix the issue by checking for console_suspend_enabled in the system
> suspend and resume path.
> 
> Note that with this fix the checks for console_suspend_enabled in
> omap8250_runtime_suspend() become useless. We now keep runtime PM usage
> count for an attached kernel console starting with commit bedb404e91bb
> ("serial: 8250_port: Don't use power management for kernel console").
> 
> Fixes: 20a41a62618d ("serial: 8250_omap: Use force_suspend and resume for system suspend")
> Cc: Udit Kumar <u-kumar1@ti.com>
> Reported-by: Thomas Richard <thomas.richard@bootlin.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>

Tested-by: Thomas Richard <thomas.richard@bootlin.com>

> ---
>  drivers/tty/serial/8250/8250_omap.c | 25 ++++++++++---------------
>  1 file changed, 10 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
> --- a/drivers/tty/serial/8250/8250_omap.c
> +++ b/drivers/tty/serial/8250/8250_omap.c
> @@ -1617,7 +1617,7 @@ static int omap8250_suspend(struct device *dev)
>  {
>  	struct omap8250_priv *priv = dev_get_drvdata(dev);
>  	struct uart_8250_port *up = serial8250_get_port(priv->line);
> -	int err;
> +	int err = 0;
>  
>  	serial8250_suspend_port(priv->line);
>  
> @@ -1627,7 +1627,8 @@ static int omap8250_suspend(struct device *dev)
>  	if (!device_may_wakeup(dev))
>  		priv->wer = 0;
>  	serial_out(up, UART_OMAP_WER, priv->wer);
> -	err = pm_runtime_force_suspend(dev);
> +	if (uart_console(&up->port) && console_suspend_enabled)
> +		err = pm_runtime_force_suspend(dev);
>  	flush_work(&priv->qos_work);
>  
>  	return err;
> @@ -1636,11 +1637,15 @@ static int omap8250_suspend(struct device *dev)
>  static int omap8250_resume(struct device *dev)
>  {
>  	struct omap8250_priv *priv = dev_get_drvdata(dev);
> +	struct uart_8250_port *up = serial8250_get_port(priv->line);
>  	int err;
>  
> -	err = pm_runtime_force_resume(dev);
> -	if (err)
> -		return err;
> +	if (uart_console(&up->port) && console_suspend_enabled) {
> +		err = pm_runtime_force_resume(dev);
> +		if (err)
> +			return err;
> +	}
> +
>  	serial8250_resume_port(priv->line);
>  	/* Paired with pm_runtime_resume_and_get() in omap8250_suspend() */
>  	pm_runtime_mark_last_busy(dev);
> @@ -1717,16 +1722,6 @@ static int omap8250_runtime_suspend(struct device *dev)
>  
>  	if (priv->line >= 0)
>  		up = serial8250_get_port(priv->line);
> -	/*
> -	 * When using 'no_console_suspend', the console UART must not be
> -	 * suspended. Since driver suspend is managed by runtime suspend,
> -	 * preventing runtime suspend (by returning error) will keep device
> -	 * active during suspend.
> -	 */
> -	if (priv->is_suspending && !console_suspend_enabled) {
> -		if (up && uart_console(&up->port))
> -			return -EBUSY;
> -	}
>  
>  	if (priv->habit & UART_ERRATA_CLOCK_DISABLE) {
>  		int ret;
-- 
Thomas Richard