Re: [PATCH v6 0/4] drivers: clk: Add ZynqMP clock driver support

[Michal Simek <michal.simek@xilinx.com>]

On 8.10.2018 20:21, Jolly Shah wrote:
> This patchset adds CCF compliant clock driver for ZynqMP.Clock driver queries 
> supported clock information from firmware and regiters pll and output clocks with CCF.
> 
> This patch series is earlier reveiwed as part of FW patchset (https://patchwork.kernel.org/cover/10555405/). 
> FW driver from that patchset is merged. This patchset contains only clock driver and is based on top of 
> xilinx firmware patch set available in below tree:
> https://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git/log/?h=next/drivers
> 
> v6:
>  - Updated eemi return payload type to be u32 instead of le32 and Eemi ops in FW driver will be updated to take care of endianess
>  - Added Stephen's review tag
>  
> v5:
>  - Added "Acked-by: Olof Johansson <olof@lixom.net>" for patches
>  
> v4:
>  - Fixed minor review comments received for v3 patchset
>  
> v3:
>  - Added check to pass only valid ioctls for ioctl eemi api
>  - Added eemi documentation including ioctl details
> 
> Jolly Shah (1):
>   drivers: clk: Add ZynqMP clock driver
> 
> Rajan Vaja (3):
>   Documentation: xilinx: Add documentation for eemi APIs
>   firmware: xilinx: Add zynqmp IOCTL API for device control
>   dt-bindings: clock: Add bindings for ZynqMP clock driver
> 
>  .../firmware/xilinx/xlnx,zynqmp-firmware.txt       |  53 ++
>  Documentation/xilinx/eemi.txt                      |  67 ++
>  drivers/clk/Kconfig                                |   1 +
>  drivers/clk/Makefile                               |   1 +
>  drivers/clk/zynqmp/Kconfig                         |  10 +
>  drivers/clk/zynqmp/Makefile                        |   4 +
>  drivers/clk/zynqmp/clk-gate-zynqmp.c               | 144 +++++
>  drivers/clk/zynqmp/clk-mux-zynqmp.c                | 141 ++++
>  drivers/clk/zynqmp/clk-zynqmp.h                    |  68 ++
>  drivers/clk/zynqmp/clkc.c                          | 716 +++++++++++++++++++++
>  drivers/clk/zynqmp/divider.c                       | 217 +++++++
>  drivers/clk/zynqmp/pll.c                           | 335 ++++++++++
>  drivers/firmware/xilinx/zynqmp.c                   |  42 ++
>  include/dt-bindings/clock/xlnx,zynqmp-clk.h        | 116 ++++
>  include/linux/firmware/xlnx-zynqmp.h               |   5 +-
>  15 files changed, 1919 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/xilinx/eemi.txt
>  create mode 100644 drivers/clk/zynqmp/Kconfig
>  create mode 100644 drivers/clk/zynqmp/Makefile
>  create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c
>  create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c
>  create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h
>  create mode 100644 drivers/clk/zynqmp/clkc.c
>  create mode 100644 drivers/clk/zynqmp/divider.c
>  create mode 100644 drivers/clk/zynqmp/pll.c
>  create mode 100644 include/dt-bindings/clock/xlnx,zynqmp-clk.h
> 

Applied all.

Thanks,
Michal