From: Len Brown <lenb@kernel.org>
To: linux-acpi@vger.kernel.org, linux-pm@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org, Bob Moore <robert.moore@intel.com>,
Lin Ming <ming.m.lin@intel.com>, Len Brown <len.brown@intel.com>
Subject: [PATCH 27/76] ACPICA: Expand OSL memory read/write interfaces to 64 bits
Date: Fri, 30 Mar 2012 06:13:30 -0400 [thread overview]
Message-ID: <653f4b538f66d37db560e0f56af08117136d29b7.1333101989.git.len.brown@intel.com> (raw)
In-Reply-To: <1333102459-23750-1-git-send-email-lenb@kernel.org>
In-Reply-To: <09f98a825a821f7a3f1b162f9ed023f37213a63b.1333101989.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
This change expands acpi_os_read_memory and acpi_os_write_memory to a
full 64 bits. This allows 64 bit transfers via the acpi_read and
acpi_write interfaces. Note: The internal acpi_hw_read and acpi_hw_write
interfaces remain at 32 bits, because 64 bits is not needed to
access the standard ACPI registers.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/acpica/hwregs.c | 8 +++-
drivers/acpi/acpica/hwxface.c | 44 ++++++---------------
drivers/acpi/apei/apei-base.c | 4 +-
drivers/acpi/osl.c | 86 +----------------------------------------
include/acpi/acpiosxf.h | 8 +---
5 files changed, 23 insertions(+), 127 deletions(-)
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 17a78e5..6b6c83b 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -157,6 +157,7 @@ acpi_hw_validate_register(struct acpi_generic_address *reg,
acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
{
u64 address;
+ u64 value64;
acpi_status status;
ACPI_FUNCTION_NAME(hw_read);
@@ -178,7 +179,9 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
*/
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
status = acpi_os_read_memory((acpi_physical_address)
- address, value, reg->bit_width);
+ address, &value64, reg->bit_width);
+
+ *value = (u32)value64;
} else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
status = acpi_hw_read_port((acpi_io_address)
@@ -228,7 +231,8 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg)
*/
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
status = acpi_os_write_memory((acpi_physical_address)
- address, value, reg->bit_width);
+ address, (u64)value,
+ reg->bit_width);
} else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
status = acpi_hw_write_port((acpi_io_address)
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index bb8dba6..a716fed 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -138,11 +138,6 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
return (status);
}
- width = reg->bit_width;
- if (width == 64) {
- width = 32; /* Break into two 32-bit transfers */
- }
-
/* Initialize entire 64-bit return value to zero */
*return_value = 0;
@@ -154,24 +149,17 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
*/
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
status = acpi_os_read_memory((acpi_physical_address)
- address, &value, width);
+ address, return_value,
+ reg->bit_width);
if (ACPI_FAILURE(status)) {
return (status);
}
- *return_value = value;
-
- if (reg->bit_width == 64) {
-
- /* Read the top 32 bits */
+ } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
- status = acpi_os_read_memory((acpi_physical_address)
- (address + 4), &value, 32);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- *return_value |= ((u64)value << 32);
+ width = reg->bit_width;
+ if (width == 64) {
+ width = 32; /* Break into two 32-bit transfers */
}
- } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
status = acpi_hw_read_port((acpi_io_address)
address, &value, width);
@@ -231,32 +219,22 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg)
return (status);
}
- width = reg->bit_width;
- if (width == 64) {
- width = 32; /* Break into two 32-bit transfers */
- }
-
/*
* Two address spaces supported: Memory or IO. PCI_Config is
* not supported here because the GAS structure is insufficient
*/
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
status = acpi_os_write_memory((acpi_physical_address)
- address, ACPI_LODWORD(value),
- width);
+ address, value, reg->bit_width);
if (ACPI_FAILURE(status)) {
return (status);
}
+ } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
- if (reg->bit_width == 64) {
- status = acpi_os_write_memory((acpi_physical_address)
- (address + 4),
- ACPI_HIDWORD(value), 32);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
+ width = reg->bit_width;
+ if (width == 64) {
+ width = 32; /* Break into two 32-bit transfers */
}
- } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
status = acpi_hw_write_port((acpi_io_address)
address, ACPI_LODWORD(value),
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index e5d53b7..ca77368 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -605,7 +605,7 @@ int apei_read(u64 *val, struct acpi_generic_address *reg)
*val = 0;
switch(reg->space_id) {
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
- status = acpi_os_read_memory64((acpi_physical_address)
+ status = acpi_os_read_memory((acpi_physical_address)
address, val, reg->bit_width);
if (ACPI_FAILURE(status))
return -EIO;
@@ -636,7 +636,7 @@ int apei_write(u64 val, struct acpi_generic_address *reg)
switch (reg->space_id) {
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
- status = acpi_os_write_memory64((acpi_physical_address)
+ status = acpi_os_write_memory((acpi_physical_address)
address, val, reg->bit_width);
if (ACPI_FAILURE(status))
return -EIO;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 412a1e0..1dea025 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -699,49 +699,6 @@ acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width)
EXPORT_SYMBOL(acpi_os_write_port);
-acpi_status
-acpi_os_read_memory(acpi_physical_address phys_addr, u32 * value, u32 width)
-{
- void __iomem *virt_addr;
- unsigned int size = width / 8;
- bool unmap = false;
- u32 dummy;
-
- rcu_read_lock();
- virt_addr = acpi_map_vaddr_lookup(phys_addr, size);
- if (!virt_addr) {
- rcu_read_unlock();
- virt_addr = acpi_os_ioremap(phys_addr, size);
- if (!virt_addr)
- return AE_BAD_ADDRESS;
- unmap = true;
- }
-
- if (!value)
- value = &dummy;
-
- switch (width) {
- case 8:
- *(u8 *) value = readb(virt_addr);
- break;
- case 16:
- *(u16 *) value = readw(virt_addr);
- break;
- case 32:
- *(u32 *) value = readl(virt_addr);
- break;
- default:
- BUG();
- }
-
- if (unmap)
- iounmap(virt_addr);
- else
- rcu_read_unlock();
-
- return AE_OK;
-}
-
#ifdef readq
static inline u64 read64(const volatile void __iomem *addr)
{
@@ -758,7 +715,7 @@ static inline u64 read64(const volatile void __iomem *addr)
#endif
acpi_status
-acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width)
+acpi_os_read_memory(acpi_physical_address phys_addr, u64 *value, u32 width)
{
void __iomem *virt_addr;
unsigned int size = width / 8;
@@ -803,45 +760,6 @@ acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width)
return AE_OK;
}
-acpi_status
-acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width)
-{
- void __iomem *virt_addr;
- unsigned int size = width / 8;
- bool unmap = false;
-
- rcu_read_lock();
- virt_addr = acpi_map_vaddr_lookup(phys_addr, size);
- if (!virt_addr) {
- rcu_read_unlock();
- virt_addr = acpi_os_ioremap(phys_addr, size);
- if (!virt_addr)
- return AE_BAD_ADDRESS;
- unmap = true;
- }
-
- switch (width) {
- case 8:
- writeb(value, virt_addr);
- break;
- case 16:
- writew(value, virt_addr);
- break;
- case 32:
- writel(value, virt_addr);
- break;
- default:
- BUG();
- }
-
- if (unmap)
- iounmap(virt_addr);
- else
- rcu_read_unlock();
-
- return AE_OK;
-}
-
#ifdef writeq
static inline void write64(u64 val, volatile void __iomem *addr)
{
@@ -856,7 +774,7 @@ static inline void write64(u64 val, volatile void __iomem *addr)
#endif
acpi_status
-acpi_os_write_memory64(acpi_physical_address phys_addr, u64 value, u32 width)
+acpi_os_write_memory(acpi_physical_address phys_addr, u64 value, u32 width)
{
void __iomem *virt_addr;
unsigned int size = width / 8;
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 7c9aebe..1cd2204 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -217,14 +217,10 @@ acpi_status acpi_os_write_port(acpi_io_address address, u32 value, u32 width);
* Platform and hardware-independent physical memory interfaces
*/
acpi_status
-acpi_os_read_memory(acpi_physical_address address, u32 * value, u32 width);
-acpi_status
-acpi_os_read_memory64(acpi_physical_address address, u64 *value, u32 width);
+acpi_os_read_memory(acpi_physical_address address, u64 *value, u32 width);
acpi_status
-acpi_os_write_memory(acpi_physical_address address, u32 value, u32 width);
-acpi_status
-acpi_os_write_memory64(acpi_physical_address address, u64 value, u32 width);
+acpi_os_write_memory(acpi_physical_address address, u64 value, u32 width);
/*
* Platform and hardware-independent PCI configuration space access
--
1.7.10.rc2.19.gfae9d
next prev parent reply other threads:[~2012-03-30 12:19 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-30 10:13 ACPI & Power Management patches for Linux-3.4 Len Brown
2012-03-30 10:13 ` [PATCH 01/76] x86, acpi, tboot: Have a ACPI os prepare sleep instead of calling tboot_sleep Len Brown
2012-03-30 10:13 ` [PATCH 02/76] tboot: Add return values for tboot_sleep Len Brown
2012-03-30 10:13 ` [PATCH 03/76] ACPI: ignore FADT reset-reg-sup flag Len Brown
2012-03-30 10:13 ` [PATCH 04/76] ACPICA: Fix regression in FADT revision checks Len Brown
2012-03-30 13:14 ` Josh Boyer
2012-04-03 19:58 ` [3.0.y, 3.2.y, 3.3.y] " Jonathan Nieder
2012-04-03 20:15 ` Josh Boyer
2012-04-04 18:58 ` Greg Kroah-Hartman
2012-03-30 10:13 ` [PATCH 05/76] cpuidle: Add common time keeping and irq enabling Len Brown
2012-03-30 10:13 ` [PATCH 06/76] ARM: at91: Consolidate time keeping and irq enable Len Brown
2012-03-30 10:13 ` [PATCH 07/76] ARM: kirkwood: " Len Brown
2012-03-30 10:13 ` [PATCH 08/76] ARM: davinci: " Len Brown
2012-03-30 10:13 ` [PATCH 09/76] ARM: omap: Consolidate OMAP3 " Len Brown
2012-03-30 10:13 ` [PATCH 10/76] ARM: omap: Consolidate OMAP4 " Len Brown
2012-03-30 10:13 ` [PATCH 11/76] ARM: shmobile: Consolidate " Len Brown
2012-03-30 10:13 ` [PATCH 12/76] SH: " Len Brown
2012-03-30 10:13 ` [PATCH 13/76] drivers/thermal/thermal_sys.c: fix build warning Len Brown
2012-03-30 10:13 ` [PATCH 14/76] thermal_sys: remove unnecessary line continuations Len Brown
2012-03-30 10:13 ` [PATCH 15/76] thermal_sys: remove obfuscating used-once macros Len Brown
2012-03-30 10:13 ` [PATCH 16/76] thermal_sys: kernel style cleanups Len Brown
2012-03-30 10:13 ` [PATCH 17/76] thermal_sys: convert printks to pr_<level> Len Brown
2012-03-30 13:41 ` [linux-pm] " Eduardo Valentin
2012-03-30 19:08 ` Joe Perches
2012-04-01 19:13 ` Eduardo Valentin
2012-03-30 10:13 ` [PATCH 18/76] thermal: add support for thermal sensor present on SPEAr13xx machines Len Brown
2012-03-30 10:13 ` [PATCH 19/76] thermal/spear_thermal: replace readl/writel with lighter _relaxed variants Len Brown
2012-03-30 10:13 ` [PATCH 20/76] thermal: spear13xx: checking for NULL instead of IS_ERR() Len Brown
2012-03-30 10:13 ` [PATCH 21/76] thermal: Fix for setting the thermal zone mode to enable/disable Len Brown
2012-03-30 10:13 ` [PATCH 22/76] ARM: davinci: Fix for cpuidle consolidation changes Len Brown
2012-03-30 10:13 ` [PATCH 23/76] ACPICA: Update _REV return value to 5 Len Brown
2012-03-30 10:13 ` [PATCH 24/76] ACPICA: ACPI 5: Support for new FADT SleepStatus, SleepControl registers Len Brown
2012-03-30 10:13 ` [PATCH 25/76] ACPICA: Move ACPI timer prototypes to public acpixf file Len Brown
2012-03-30 10:13 ` [PATCH 26/76] ACPICA: Support for custom ACPICA build for ACPI 5 reduced hardware Len Brown
2012-03-30 10:13 ` Len Brown [this message]
2012-03-30 10:13 ` [PATCH 28/76] ACPICA: ACPI 5: Update debug output for new notify values Len Brown
2012-03-30 10:13 ` [PATCH 29/76] ACPICA: Add acpi_os_physical_table_override interface Len Brown
2012-03-30 10:13 ` [PATCH 30/76] ACPICA: Distill multiple sleep method functions to a single function Len Brown
2012-03-30 10:13 ` [PATCH 31/76] ACPICA: Split sleep/wake functions into two files Len Brown
2012-03-30 10:13 ` [PATCH 32/76] ACPICA: Add table-driven dispatch for sleep/wake functions Len Brown
2012-03-30 10:13 ` [PATCH 33/76] ACPICA: Update to version 20120215 Len Brown
2012-03-30 10:13 ` [PATCH 34/76] ACPICA: Clarify METHOD_NAME* defines for full-pathname cases Len Brown
2012-03-30 10:13 ` [PATCH 35/76] ACPICA: Change exception code for invalid pathname in acpi_evaluate_object Len Brown
2012-03-30 10:13 ` [PATCH 36/76] ACPICA: Debugger: Add missing object info to namespace dump Len Brown
2012-03-30 10:13 ` [PATCH 37/76] ACPICA: Sleep/Wake interfaces: optionally execute _GTS and _BFS Len Brown
2012-03-30 10:13 ` [PATCH 38/76] ACPI: Move module parameter gts and bfs to sleep.c Len Brown
2012-03-30 10:13 ` [PATCH 39/76] tools turbostat: add summary option Len Brown
2012-03-30 10:13 ` [PATCH 40/76] tools turbostat: reduce measurement overhead due to IPIs Len Brown
2012-03-30 10:13 ` [PATCH 41/76] tools turbostat: harden against cpu online/offline Len Brown
2012-03-30 10:13 ` [PATCH 42/76] ACPI: ec: Do request_region outside WARN() Len Brown
2012-03-30 10:13 ` [PATCH 43/76] ACPI: Make ACPI interrupt threaded Len Brown
2012-03-30 10:13 ` [PATCH 44/76] ACPICA: Object repair code: Support to add Package wrappers Len Brown
2012-03-30 10:13 ` [PATCH 45/76] ACPICA: Update to version 20120320 Len Brown
2012-03-30 10:13 ` [PATCH 46/76] ACPI: Introduce ACPI D3_COLD state support Len Brown
2012-04-01 6:53 ` [linux-pm] " Rafael J. Wysocki
2012-03-30 10:13 ` [PATCH 47/76] ACPI: Add interface to register/unregister device to/from power resources Len Brown
2012-03-30 10:13 ` [PATCH 48/76] cpuidle: add a sysfs entry to disable specific C state for debug purpose Len Brown
2012-03-30 10:13 ` [PATCH 49/76] cpuidle: use the driver's state_count as default Len Brown
2012-03-30 10:13 ` [PATCH 50/76] cpuidle: remove useless array definition in cpuidle_structure Len Brown
2012-03-30 10:13 ` [PATCH 51/76] cpuidle: remove unused 'governor_data' field Len Brown
2012-03-30 10:13 ` [PATCH 52/76] ACPI, PCI: Move acpi_dev_run_wake() to ACPI core Len Brown
2012-03-30 10:13 ` [PATCH 53/76] ACPI: Evaluate thermal trip points before reading temperature Len Brown
2012-03-30 10:13 ` [PATCH 54/76] ACPI: Ensure thermal limits match CPU frequencies Len Brown
2012-03-30 10:13 ` [PATCH 55/76] ACPI / PM: print physical addresses consistently with other parts of kernel Len Brown
2012-03-30 10:13 ` [PATCH 56/76] ACPI: Add CPU hotplug support for processor device objects Len Brown
2012-03-30 10:14 ` [PATCH 57/76] ACPI / Video: blacklist some samsung laptops Len Brown
2012-03-30 12:07 ` Corentin Chary
2012-03-30 12:16 ` Len Brown
2012-03-30 10:14 ` [PATCH 58/76] idle, x86: Allow off-lined CPU to enter deeper C states Len Brown
2012-04-02 16:13 ` Tony Luck
2012-04-02 17:25 ` Tony Luck
2012-04-02 17:45 ` Konrad Rzeszutek Wilk
2012-04-02 17:56 ` Boris Ostrovsky
2012-04-02 18:02 ` Tony Luck
2012-04-02 18:10 ` Boris Ostrovsky
2012-03-30 10:14 ` [PATCH 59/76] cpuidle: power_usage should be declared signed integer Len Brown
2012-03-30 10:14 ` [PATCH 60/76] ACPI, APEI, Fix ERST header length check Len Brown
2012-03-30 10:14 ` [PATCH 61/76] ACPI, APEI, EINJ, limit the range of einj_param Len Brown
2012-03-30 10:14 ` [PATCH 62/76] ACPI, APEI, EINJ, new parameter to control trigger action Len Brown
2012-03-30 10:14 ` [PATCH 63/76] Update documentation for parameter *notrigger* in einj.txt Len Brown
2012-03-30 10:14 ` [PATCH 64/76] ACPI, APEI: Fix incorrect APEI register bit width check and usage Len Brown
2012-03-30 10:14 ` [PATCH 65/76] ACPI: processor_driver: add missing kfree Len Brown
2012-03-30 10:14 ` [PATCH 66/76] ACPI: Fix use-after-free in acpi_map_lsapic Len Brown
2012-03-30 10:14 ` [PATCH 67/76] PNPACPI: Fix device ref leaking in acpi_pnp_match Len Brown
2012-03-30 10:14 ` [PATCH 68/76] ACPI: consistently use should_use_kmap() Len Brown
2012-03-30 10:14 ` [PATCH 69/76] ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed() Len Brown
2012-03-30 10:14 ` [PATCH 70/76] ACPI: Clean redundant codes in scan.c Len Brown
2012-03-30 10:14 ` [PATCH 71/76] CPER failed to handle generic error records with multiple sections Len Brown
2012-03-30 10:14 ` [PATCH 72/76] ACPI: Fix logic for removing mappings in 'acpi_unmap' Len Brown
2012-03-30 10:14 ` [PATCH 73/76] ACPI: export acpi_kobj Len Brown
2012-03-30 10:14 ` [PATCH 74/76] ACPI: Add support for exposing BGRT data Len Brown
2012-03-30 10:14 ` [PATCH 75/76] Disable MCP limit exceeded messages from Intel IPS driver Len Brown
2012-03-30 10:14 ` [PATCH 76/76] ACPI throttling: fix endian bug in acpi_read_throttling_status() Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=653f4b538f66d37db560e0f56af08117136d29b7.1333101989.git.len.brown@intel.com \
--to=lenb@kernel.org \
--cc=len.brown@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=ming.m.lin@intel.com \
--cc=robert.moore@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®