mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Si-Wei Liu <si-wei.liu@oracle.com>
To: Eli Cohen <elic@nvidia.com>, mst@redhat.com, jasowang@redhat.com
Cc: virtualization@lists.linux-foundation.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 2/5] vdpa: Add support for querying vendor statistics
Date: Tue, 17 May 2022 18:03:10 -0700	[thread overview]
Message-ID: <65c78175-50bc-6aa9-154d-c67dcea70421@oracle.com> (raw)
In-Reply-To: <20220517131348.498421-3-elic@nvidia.com>



On 5/17/2022 6:13 AM, Eli Cohen wrote:
> Allows to read vendor statistics of a vdpa device. The specific
> statistics data are received from the upstream driver in the form of an
> (attribute name, attribute value) pairs.
>
> An example of statistics for mlx5_vdpa device are:
>
> received_desc - number of descriptors received by the virtqueue
> completed_desc - number of descriptors completed by the virtqueue
>
> A descriptor using indirect buffers is still counted as 1. In addition,
> N chained descriptors are counted correctly N times as one would expect.
>
> A new callback was added to vdpa_config_ops which provides the means for
> the vdpa driver to return statistics results.
>
> The interface allows for reading all the supported virtqueues, including
> the control virtqueue if it exists.
>
> Below are some examples taken from mlx5_vdpa which are introduced in the
> following patch:
>
> 1. Read statistics for the virtqueue at index 1
>
> $ vdpa dev vstats show vdpa-a qidx 1
> vdpa-a:
> queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836
>
> 2. Read statistics for the virtqueue at index 32
> $ vdpa dev vstats show vdpa-a qidx 32
> vdpa-a:
> queue_type control_vq queue_index 32 received_desc 62 completed_desc 62
>
> 3. Read statisitics for the virtqueue at index 0 with json output
> $ vdpa -j dev vstats show vdpa-a qidx 0
> {"vstats":{"vdpa-a":{
> "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\
>   "name":"completed_desc","value":417548}}}
>
> 4. Read statistics for the virtqueue at index 0 with preety json output
> $ vdpa -jp dev vstats show vdpa-a qidx 0
> {
>      "vstats": {
>          "vdpa-a": {
>
>              "queue_type": "rx",
>              "queue_index": 0,
>              "name": "received_desc",
>              "value": 417776,
>              "name": "completed_desc",
>              "value": 417548
>          }
>      }
> }
>
> Signed-off-by: Eli Cohen <elic@nvidia.com>
> ---
>   drivers/vdpa/vdpa.c       | 160 ++++++++++++++++++++++++++++++++++++++
>   include/linux/vdpa.h      |   3 +
>   include/uapi/linux/vdpa.h |   6 ++
>   3 files changed, 169 insertions(+)
>
> diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
> index fac89a0d8178..1b810961ccc3 100644
> --- a/drivers/vdpa/vdpa.c
> +++ b/drivers/vdpa/vdpa.c
> @@ -914,6 +914,106 @@ vdpa_dev_config_fill(struct vdpa_device *vdev, struct sk_buff *msg, u32 portid,
>   	return err;
>   }
>   
> +static int vdpa_fill_stats_rec(struct vdpa_device *vdev, struct sk_buff *msg,
> +			       struct genl_info *info, u32 index)
> +{
> +	struct virtio_net_config config = {};
> +	u64 features;
> +	u16 max_vqp;
> +	u8 status;
> +	int err;
> +
This entire function should perhaps need to take cf_mutex (worth 
converting to rwsem as well) to guard against concurrent modification 
via .set_status() or .set_config() from the upper stack. Similar to 
vdpa_dev_config_fill().

> +	status = vdev->config->get_status(vdev);
> +	if (!(status & VIRTIO_CONFIG_S_FEATURES_OK)) {
> +		NL_SET_ERR_MSG_MOD(info->extack, "feature negotiation not complete");
> +		return -EAGAIN;
> +	}
> +	vdpa_get_config(vdev, 0, &config, sizeof(config));
This should use vdpa_get_config_unlocked() without lock.

Regards,
-Siwei

> +
> +	max_vqp = le16_to_cpu(config.max_virtqueue_pairs);
> +	if (nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_MAX_VQP, max_vqp))
> +		return -EMSGSIZE;
> +
> +	features = vdev->config->get_driver_features(vdev);
> +	if (nla_put_u64_64bit(msg, VDPA_ATTR_DEV_NEGOTIATED_FEATURES,
> +			      features, VDPA_ATTR_PAD))
> +		return -EMSGSIZE;
> +
> +	if (nla_put_u32(msg, VDPA_ATTR_DEV_QUEUE_INDEX, index))
> +		return -EMSGSIZE;
> +
> +	err = vdev->config->get_vendor_vq_stats(vdev, index, msg, info->extack);
> +	if (err)
> +		return err;
> +
> +	return 0;
> +}
> +
> +static int vendor_stats_fill(struct vdpa_device *vdev, struct sk_buff *msg,
> +			     struct genl_info *info, u32 index)
> +{
> +	int err;
> +
> +	if (!vdev->config->get_vendor_vq_stats)
> +		return -EOPNOTSUPP;
> +
> +	err = vdpa_fill_stats_rec(vdev, msg, info, index);
> +	if (err)
> +		return err;
> +
> +	return 0;
> +}
> +
> +static int vdpa_dev_vendor_stats_fill(struct vdpa_device *vdev,
> +				      struct sk_buff *msg,
> +				      struct genl_info *info, u32 index)
> +{
> +	u32 device_id;
> +	void *hdr;
> +	int err;
> +	u32 portid = info->snd_portid;
> +	u32 seq = info->snd_seq;
> +	u32 flags = 0;
> +
> +	hdr = genlmsg_put(msg, portid, seq, &vdpa_nl_family, flags,
> +			  VDPA_CMD_DEV_VSTATS_GET);
> +	if (!hdr)
> +		return -EMSGSIZE;
> +
> +	if (nla_put_string(msg, VDPA_ATTR_DEV_NAME, dev_name(&vdev->dev))) {
> +		err = -EMSGSIZE;
> +		goto undo_msg;
> +	}
> +
> +	device_id = vdev->config->get_device_id(vdev);
> +	if (nla_put_u32(msg, VDPA_ATTR_DEV_ID, device_id)) {
> +		err = -EMSGSIZE;
> +		goto undo_msg;
> +	}
> +
> +	switch (device_id) {
> +	case VIRTIO_ID_NET:
> +		if (index > VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX) {
> +			NL_SET_ERR_MSG_MOD(info->extack, "queue index excceeds max value");
> +			err = -ERANGE;
> +			break;
> +		}
> +
> +		err = vendor_stats_fill(vdev, msg, info, index);
> +		break;
> +	default:
> +		err = -EOPNOTSUPP;
> +		break;
> +	}
> +	genlmsg_end(msg, hdr);
> +
> +	return err;
> +
> +undo_msg:
> +	genlmsg_cancel(msg, hdr);
> +	return err;
> +}
> +
>   static int vdpa_nl_cmd_dev_config_get_doit(struct sk_buff *skb, struct genl_info *info)
>   {
>   	struct vdpa_device *vdev;
> @@ -995,6 +1095,60 @@ vdpa_nl_cmd_dev_config_get_dumpit(struct sk_buff *msg, struct netlink_callback *
>   	return msg->len;
>   }
>   
> +static int vdpa_nl_cmd_dev_stats_get_doit(struct sk_buff *skb,
> +					  struct genl_info *info)
> +{
> +	struct vdpa_device *vdev;
> +	struct sk_buff *msg;
> +	const char *devname;
> +	struct device *dev;
> +	u32 index;
> +	int err;
> +
> +	if (!info->attrs[VDPA_ATTR_DEV_NAME])
> +		return -EINVAL;
> +
> +	if (!info->attrs[VDPA_ATTR_DEV_QUEUE_INDEX])
> +		return -EINVAL;
> +
> +	devname = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
> +	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
> +	if (!msg)
> +		return -ENOMEM;
> +
> +	index = nla_get_u32(info->attrs[VDPA_ATTR_DEV_QUEUE_INDEX]);
> +	mutex_lock(&vdpa_dev_mutex);
> +	dev = bus_find_device(&vdpa_bus, NULL, devname, vdpa_name_match);
> +	if (!dev) {
> +		NL_SET_ERR_MSG_MOD(info->extack, "device not found");
> +		err = -ENODEV;
> +		goto dev_err;
> +	}
> +	vdev = container_of(dev, struct vdpa_device, dev);
> +	if (!vdev->mdev) {
> +		NL_SET_ERR_MSG_MOD(info->extack, "unmanaged vdpa device");
> +		err = -EINVAL;
> +		goto mdev_err;
> +	}
> +	err = vdpa_dev_vendor_stats_fill(vdev, msg, info, index);
> +	if (err)
> +		goto mdev_err;
> +
> +	err = genlmsg_reply(msg, info);
> +
> +	put_device(dev);
> +	mutex_unlock(&vdpa_dev_mutex);
> +
> +	return err;
> +
> +mdev_err:
> +	put_device(dev);
> +dev_err:
> +	nlmsg_free(msg);
> +	mutex_unlock(&vdpa_dev_mutex);
> +	return err;
> +}
> +
>   static const struct nla_policy vdpa_nl_policy[VDPA_ATTR_MAX + 1] = {
>   	[VDPA_ATTR_MGMTDEV_BUS_NAME] = { .type = NLA_NUL_STRING },
>   	[VDPA_ATTR_MGMTDEV_DEV_NAME] = { .type = NLA_STRING },
> @@ -1035,6 +1189,12 @@ static const struct genl_ops vdpa_nl_ops[] = {
>   		.doit = vdpa_nl_cmd_dev_config_get_doit,
>   		.dumpit = vdpa_nl_cmd_dev_config_get_dumpit,
>   	},
> +	{
> +		.cmd = VDPA_CMD_DEV_VSTATS_GET,
> +		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
> +		.doit = vdpa_nl_cmd_dev_stats_get_doit,
> +		.flags = GENL_ADMIN_PERM,
> +	},
>   };
>   
>   static struct genl_family vdpa_nl_family __ro_after_init = {
> diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h
> index 8943a209202e..2ae8443331e1 100644
> --- a/include/linux/vdpa.h
> +++ b/include/linux/vdpa.h
> @@ -276,6 +276,9 @@ struct vdpa_config_ops {
>   			    const struct vdpa_vq_state *state);
>   	int (*get_vq_state)(struct vdpa_device *vdev, u16 idx,
>   			    struct vdpa_vq_state *state);
> +	int (*get_vendor_vq_stats)(struct vdpa_device *vdev, u16 idx,
> +				   struct sk_buff *msg,
> +				   struct netlink_ext_ack *extack);
>   	struct vdpa_notification_area
>   	(*get_vq_notification)(struct vdpa_device *vdev, u16 idx);
>   	/* vq irq is not expected to be changed once DRIVER_OK is set */
> diff --git a/include/uapi/linux/vdpa.h b/include/uapi/linux/vdpa.h
> index 1061d8d2d09d..25c55cab3d7c 100644
> --- a/include/uapi/linux/vdpa.h
> +++ b/include/uapi/linux/vdpa.h
> @@ -18,6 +18,7 @@ enum vdpa_command {
>   	VDPA_CMD_DEV_DEL,
>   	VDPA_CMD_DEV_GET,		/* can dump */
>   	VDPA_CMD_DEV_CONFIG_GET,	/* can dump */
> +	VDPA_CMD_DEV_VSTATS_GET,
>   };
>   
>   enum vdpa_attr {
> @@ -46,6 +47,11 @@ enum vdpa_attr {
>   	VDPA_ATTR_DEV_NEGOTIATED_FEATURES,	/* u64 */
>   	VDPA_ATTR_DEV_MGMTDEV_MAX_VQS,		/* u32 */
>   	VDPA_ATTR_DEV_SUPPORTED_FEATURES,	/* u64 */
> +
> +	VDPA_ATTR_DEV_QUEUE_INDEX,              /* u32 */
> +	VDPA_ATTR_DEV_VENDOR_ATTR_NAME,		/* string */
> +	VDPA_ATTR_DEV_VENDOR_ATTR_VALUE,        /* u64 */
> +
>   	/* new attributes must be added above here */
>   	VDPA_ATTR_MAX,
>   };


  reply	other threads:[~2022-05-18  1:03 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-17 13:13 [PATCH v7 0/5] Show statistics for a vdpa device Eli Cohen
2022-05-17 13:13 ` [PATCH v7 1/5] vdpa: Fix error logic in vdpa_nl_cmd_dev_get_doit Eli Cohen
2022-05-17 13:13 ` [PATCH v7 2/5] vdpa: Add support for querying vendor statistics Eli Cohen
2022-05-18  1:03   ` Si-Wei Liu [this message]
2022-05-18  6:12     ` Eli Cohen
2022-05-17 13:13 ` [PATCH v7 3/5] net/vdpa: Use readers/writers semaphore instead of mutex Eli Cohen
2022-05-17 13:13 ` [PATCH v7 4/5] vdpa/mlx5: Add support for reading descriptor statistics Eli Cohen
2022-05-17 13:13 ` [PATCH v7 5/5] vdpa/mlx5: Use readers/writers semaphore instead of mutex Eli Cohen
2022-05-17 23:59   ` Si-Wei Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=65c78175-50bc-6aa9-154d-c67dcea70421@oracle.com \
    --to=si-wei.liu@oracle.com \
    --cc=elic@nvidia.com \
    --cc=jasowang@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®