From: Hans de Goede <hdegoede@redhat.com>
To: Guenter Roeck <linux@roeck-us.net>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Darren Hart <dvhart@infradead.org>,
Andy Shevchenko <andy@infradead.org>,
Peter Rosin <peda@axentia.se>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org, devel@driverdev.osuosl.org,
Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@linux.intel.com>,
Sathyanarayanan Kuppuswamy Natarajan <sathyaosid@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org
Subject: Re: [PATCH v2 08/11] staging: typec: tcpm: Set mux to device mode when configured as such
Date: Fri, 22 Sep 2017 16:02:27 +0200 [thread overview]
Message-ID: <65cf943e-668b-a9e2-bd4c-e272c87cb18f@redhat.com> (raw)
In-Reply-To: <d95237a4-63da-4d5e-5dba-3354df78306b@roeck-us.net>
Hi,
On 09/11/2017 12:56 AM, Guenter Roeck wrote:
> On 09/05/2017 09:42 AM, Hans de Goede wrote:
>> Setting the mux to TYPEC_MUX_NONE, TCPC_USB_SWITCH_DISCONNECT when the
>> data-role is device is not correct. Plenty of devices support operating
>> as USB device through a (separate) USB device controller.
>>
>> So this commit instead splits out TYPEC_MUX_USB into TYPEC_MUX_USB_HOST
>> and TYPEC_MUX_USB_DEVICE and makes tcpm_set_roles() set the mux
>> accordingly.
>>
>> Likewise TCPC_MUX_DP gets renamed to TCPC_MUX_DP_SRC to make clear that
>> this is for configuring the Type-C port as a Display Port source, not a
>> sink.
>>
>> Last this commit makes tcpm_reset_port() to set the mux to
>> TYPEC_MUX_NONE, TCPC_USB_SWITCH_DISCONNECT so that it does not and up
>> staying in host (and with this commit also device) mode after a detach.
>>
> This sentence is hard to understand.
Ok, changed to:
"Last this commit makes tcpm_reset_port() call tcpm_mux_set(port,
TYPEC_MUX_NONE, TCPC_USB_SWITCH_DISCONNECT) so that the mux does _not_
stay in its last mode after a detach."
For v3 of this patchset.
>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>
> Otherwise
>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
And added your Reviewed-by.
Thanks & Regards,
Hans
>
>
>> ---
>> drivers/staging/typec/tcpm.c | 7 ++++---
>> drivers/staging/typec/tcpm.h | 22 ++++++++++++++--------
>> 2 files changed, 18 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c
>> index 8af62e74d54c..ffe7e26d4ed3 100644
>> --- a/drivers/staging/typec/tcpm.c
>> +++ b/drivers/staging/typec/tcpm.c
>> @@ -752,11 +752,11 @@ static int tcpm_set_roles(struct tcpm_port *port, bool attached,
>> int ret;
>> if (data == TYPEC_HOST)
>> - ret = tcpm_mux_set(port, TYPEC_MUX_USB,
>> + ret = tcpm_mux_set(port, TYPEC_MUX_USB_HOST,
>> TCPC_USB_SWITCH_CONNECT);
>> else
>> - ret = tcpm_mux_set(port, TYPEC_MUX_NONE,
>> - TCPC_USB_SWITCH_DISCONNECT);
>> + ret = tcpm_mux_set(port, TYPEC_MUX_USB_DEVICE,
>> + TCPC_USB_SWITCH_CONNECT);
>> if (ret < 0)
>> return ret;
>> @@ -2025,6 +2025,7 @@ static void tcpm_reset_port(struct tcpm_port *port)
>> tcpm_init_vconn(port);
>> tcpm_set_current_limit(port, 0, 0);
>> tcpm_set_polarity(port, TYPEC_POLARITY_CC1);
>> + tcpm_mux_set(port, TYPEC_MUX_NONE, TCPC_USB_SWITCH_DISCONNECT);
>> tcpm_set_attached_state(port, false);
>> port->try_src_count = 0;
>> port->try_snk_count = 0;
>> diff --git a/drivers/staging/typec/tcpm.h b/drivers/staging/typec/tcpm.h
>> index 7e9a6b7b5cd6..f662eed48c86 100644
>> --- a/drivers/staging/typec/tcpm.h
>> +++ b/drivers/staging/typec/tcpm.h
>> @@ -83,17 +83,23 @@ enum tcpc_usb_switch {
>> };
>> /* Mux state attributes */
>> -#define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */
>> -#define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */
>> -#define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */
>> +#define TCPC_MUX_USB_DEVICE_ENABLED BIT(0) /* USB device enabled */
>> +#define TCPC_MUX_USB_HOST_ENABLED BIT(1) /* USB host enabled */
>> +#define TCPC_MUX_DP_SRC_ENABLED BIT(2) /* DP enabled */
>> +#define TCPC_MUX_POLARITY_INVERTED BIT(3) /* Polarity inverted */
>> /* Mux modes, decoded to attributes */
>> enum tcpc_mux_mode {
>> - TYPEC_MUX_NONE = 0, /* Open switch */
>> - TYPEC_MUX_USB = TCPC_MUX_USB_ENABLED, /* USB only */
>> - TYPEC_MUX_DP = TCPC_MUX_DP_ENABLED, /* DP only */
>> - TYPEC_MUX_DOCK = TCPC_MUX_USB_ENABLED | /* Both USB and DP */
>> - TCPC_MUX_DP_ENABLED,
>> + /* Open switch */
>> + TYPEC_MUX_NONE = 0,
>> + /* USB device only */
>> + TYPEC_MUX_USB_DEVICE = TCPC_MUX_USB_DEVICE_ENABLED,
>> + /* USB host only */
>> + TYPEC_MUX_USB_HOST = TCPC_MUX_USB_HOST_ENABLED,
>> + /* DP source only */
>> + TYPEC_MUX_DP = TCPC_MUX_DP_SRC_ENABLED,
>> + /* Both USB host and DP source */
>> + TYPEC_MUX_DOCK = TCPC_MUX_USB_HOST_ENABLED | TCPC_MUX_DP_SRC_ENABLED,
>> };
>> struct tcpc_mux_dev {
>>
>
next prev parent reply other threads:[~2017-09-22 14:02 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-05 16:42 [PATCH v2 00/11] mux/typec: Add USB / TypeC mux drivers and hook them up on some x86 systems Hans de Goede
2017-09-05 16:42 ` [PATCH v2 01/11] mux: core: Add of_mux_control_get helper function Hans de Goede
2017-09-05 16:42 ` [PATCH v2 02/11] mux: core: Add support for getting a mux controller on a non DT platform Hans de Goede
2017-09-05 16:42 ` [PATCH v2 03/11] mux: core: Add usb.h header with MUX_USB_* and and MUX_TYPEC_* state constants Hans de Goede
2017-09-08 15:47 ` Peter Rosin
2017-09-08 17:07 ` Hans de Goede
2017-09-10 21:36 ` Peter Rosin
2017-09-21 12:07 ` Hans de Goede
2017-09-05 16:42 ` [PATCH v2 04/11] usb: xhci: Add Intel cherrytrail extended cap / otg phy mux handling Hans de Goede
2017-09-07 13:14 ` Mathias Nyman
2017-09-07 15:49 ` Hans de Goede
2017-09-19 12:40 ` Mathias Nyman
2017-09-21 11:55 ` Hans de Goede
2017-09-08 15:47 ` Peter Rosin
2017-09-05 16:42 ` [PATCH v2 05/11] mux: Add Intel Cherrytrail USB mux driver Hans de Goede
2017-09-08 15:45 ` Peter Rosin
2017-09-08 15:45 ` [PATCH 1/2] mux: add mux_control_get_optional() API Peter Rosin
2017-09-08 15:54 ` Peter Rosin
2017-09-19 18:35 ` Hans de Goede
2017-09-20 16:11 ` Stephen Boyd
2017-09-08 15:45 ` [PATCH 2/2] mux: add explicit hook to leave the mux as-is on init/registration Peter Rosin
2017-09-19 16:38 ` [PATCH v2 05/11] mux: Add Intel Cherrytrail USB mux driver Hans de Goede
2017-09-05 16:42 ` [PATCH v2 06/11] mux: Add Pericom PI3USB30532 Type-C " Hans de Goede
2017-09-05 16:42 ` [PATCH v2 07/11] extcon: intel-int3496: Add support for controlling the USB-role mux Hans de Goede
2017-09-05 16:42 ` [PATCH v2 08/11] staging: typec: tcpm: Set mux to device mode when configured as such Hans de Goede
2017-09-10 22:56 ` Guenter Roeck
2017-09-22 14:02 ` Hans de Goede [this message]
2017-09-05 16:42 ` [PATCH v2 09/11] staging: typec: Add Generic TCPC mux driver using the mux subsys Hans de Goede
2017-09-05 16:42 ` [PATCH v2 10/11] staging: typec: fusb302: Hook up mux support using tcpc_gen_mux support Hans de Goede
2017-09-12 22:20 ` Rob Herring
2017-09-13 8:56 ` Hans de Goede
2017-09-13 13:38 ` Rob Herring
2017-09-13 14:06 ` Hans de Goede
2017-09-13 15:07 ` Rob Herring
2017-09-13 15:48 ` Hans de Goede
2017-09-13 16:17 ` Guenter Roeck
2017-09-25 10:34 ` Peter Rosin
2017-09-25 11:35 ` Hans de Goede
2017-09-25 13:45 ` Peter Rosin
2017-09-25 14:17 ` Hans de Goede
2017-09-05 16:42 ` [PATCH v2 11/11] platform/x86: intel_cht_int33fe: Add mux mappings for the Type-C port Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=65cf943e-668b-a9e2-bd4c-e272c87cb18f@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy@infradead.org \
--cc=cw00.choi@samsung.com \
--cc=devel@driverdev.osuosl.org \
--cc=dvhart@infradead.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mathias.nyman@intel.com \
--cc=myungjoo.ham@samsung.com \
--cc=peda@axentia.se \
--cc=platform-driver-x86@vger.kernel.org \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=sathyaosid@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome