From: Bob Pearson <rpearsonhpe@gmail.com>
To: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>,
linux-rdma@vger.kernel.org, leonro@nvidia.com, jgg@nvidia.com,
zyjzyj2000@gmail.com
Cc: linux-kernel@vger.kernel.org, yangx.jy@fujitsu.com,
lizhijian@fujitsu.com, y-goto@fujitsu.com
Subject: Re: [PATCH for-next v5 1/7] RDMA/rxe: Always defer tasks on responder and completer to workqueue
Date: Thu, 18 May 2023 17:25:39 -0500 [thread overview]
Message-ID: <660e05c8-9016-f97a-1af3-341eec8e911e@gmail.com> (raw)
In-Reply-To: <3edbcfacf7ff4fbe8b527a372ef73d1a6db17144.1684397037.git.matsuda-daisuke@fujitsu.com>
On 5/18/23 03:21, Daisuke Matsuda wrote:
> Both responder and completer need to sleep to execute page-fault when used
> with ODP. It can happen when they are going to access user MRs, so tasks
> must be executed in process context for such cases.
>
> Additionally, current implementation seldom defers tasks to workqueue, but
> instead defers to a softirq context running do_task(). It is called from
> rxe_resp_queue_pkt() and rxe_comp_queue_pkt() in SOFTIRQ_NET_RX context and
> can last until maximum RXE_MAX_ITERATIONS (=1024) loops are executed. The
> problem is the that task execuion appears to be anonymous loads in the
> system and that the loop can throttle other softirqs on the same CPU.
>
> This patch makes responder and completer codes run in process context for
> ODP and the problem described above.
>
> Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
> ---
> drivers/infiniband/sw/rxe/rxe_comp.c | 12 +-----------
> drivers/infiniband/sw/rxe/rxe_hw_counters.c | 1 -
> drivers/infiniband/sw/rxe/rxe_hw_counters.h | 1 -
> drivers/infiniband/sw/rxe/rxe_resp.c | 13 +------------
> 4 files changed, 2 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/infiniband/sw/rxe/rxe_comp.c b/drivers/infiniband/sw/rxe/rxe_comp.c
> index db18ace74d2b..671fdb645030 100644
> --- a/drivers/infiniband/sw/rxe/rxe_comp.c
> +++ b/drivers/infiniband/sw/rxe/rxe_comp.c
> @@ -128,18 +128,8 @@ void retransmit_timer(struct timer_list *t)
>
> void rxe_comp_queue_pkt(struct rxe_qp *qp, struct sk_buff *skb)
> {
> - int must_sched;
> -
> skb_queue_tail(&qp->resp_pkts, skb);
> -
> - must_sched = skb_queue_len(&qp->resp_pkts) > 1;
> - if (must_sched != 0)
> - rxe_counter_inc(SKB_TO_PKT(skb)->rxe, RXE_CNT_COMPLETER_SCHED);
> -
> - if (must_sched)
> - rxe_sched_task(&qp->comp.task);
> - else
> - rxe_run_task(&qp->comp.task);
> + rxe_sched_task(&qp->comp.task);
> }
>
> static inline enum comp_state get_wqe(struct rxe_qp *qp,
> diff --git a/drivers/infiniband/sw/rxe/rxe_hw_counters.c b/drivers/infiniband/sw/rxe/rxe_hw_counters.c
> index a012522b577a..dc23cf3a6967 100644
> --- a/drivers/infiniband/sw/rxe/rxe_hw_counters.c
> +++ b/drivers/infiniband/sw/rxe/rxe_hw_counters.c
> @@ -14,7 +14,6 @@ static const struct rdma_stat_desc rxe_counter_descs[] = {
> [RXE_CNT_RCV_RNR].name = "rcvd_rnr_err",
> [RXE_CNT_SND_RNR].name = "send_rnr_err",
> [RXE_CNT_RCV_SEQ_ERR].name = "rcvd_seq_err",
> - [RXE_CNT_COMPLETER_SCHED].name = "ack_deferred",
> [RXE_CNT_RETRY_EXCEEDED].name = "retry_exceeded_err",
> [RXE_CNT_RNR_RETRY_EXCEEDED].name = "retry_rnr_exceeded_err",
> [RXE_CNT_COMP_RETRY].name = "completer_retry_err",
> diff --git a/drivers/infiniband/sw/rxe/rxe_hw_counters.h b/drivers/infiniband/sw/rxe/rxe_hw_counters.h
> index 71f4d4fa9dc8..303da0e3134a 100644
> --- a/drivers/infiniband/sw/rxe/rxe_hw_counters.h
> +++ b/drivers/infiniband/sw/rxe/rxe_hw_counters.h
> @@ -18,7 +18,6 @@ enum rxe_counters {
> RXE_CNT_RCV_RNR,
> RXE_CNT_SND_RNR,
> RXE_CNT_RCV_SEQ_ERR,
> - RXE_CNT_COMPLETER_SCHED,
> RXE_CNT_RETRY_EXCEEDED,
> RXE_CNT_RNR_RETRY_EXCEEDED,
> RXE_CNT_COMP_RETRY,
> diff --git a/drivers/infiniband/sw/rxe/rxe_resp.c b/drivers/infiniband/sw/rxe/rxe_resp.c
> index 68f6cd188d8e..ba0222bfce9e 100644
> --- a/drivers/infiniband/sw/rxe/rxe_resp.c
> +++ b/drivers/infiniband/sw/rxe/rxe_resp.c
> @@ -46,21 +46,10 @@ static char *resp_state_name[] = {
> [RESPST_EXIT] = "EXIT",
> };
>
> -/* rxe_recv calls here to add a request packet to the input queue */
> void rxe_resp_queue_pkt(struct rxe_qp *qp, struct sk_buff *skb)
> {
> - int must_sched;
> - struct rxe_pkt_info *pkt = SKB_TO_PKT(skb);
> -
> skb_queue_tail(&qp->req_pkts, skb);
> -
> - must_sched = (pkt->opcode == IB_OPCODE_RC_RDMA_READ_REQUEST) ||
> - (skb_queue_len(&qp->req_pkts) > 1);
> -
> - if (must_sched)
> - rxe_sched_task(&qp->resp.task);
> - else
> - rxe_run_task(&qp->resp.task);
> + rxe_sched_task(&qp->resp.task);
> }
>
> static inline enum resp_states get_req(struct rxe_qp *qp,
Looks good.
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
next prev parent reply other threads:[~2023-05-18 22:25 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-18 8:21 [PATCH for-next v5 0/7] On-Demand Paging on SoftRoCE Daisuke Matsuda
2023-05-18 8:21 ` [PATCH for-next v5 1/7] RDMA/rxe: Always defer tasks on responder and completer to workqueue Daisuke Matsuda
2023-05-18 8:26 ` Daisuke Matsuda (Fujitsu)
2023-05-18 22:25 ` Bob Pearson [this message]
2023-05-18 8:21 ` [PATCH for-next v5 2/7] RDMA/rxe: Make MR functions accessible from other rxe source code Daisuke Matsuda
2023-05-18 22:28 ` Bob Pearson
2023-05-18 8:21 ` [PATCH for-next v5 3/7] RDMA/rxe: Move resp_states definition to rxe_verbs.h Daisuke Matsuda
2023-05-18 22:30 ` Bob Pearson
2023-05-18 8:21 ` [PATCH for-next v5 4/7] RDMA/rxe: Add page invalidation support Daisuke Matsuda
2023-05-19 17:08 ` Bob Pearson
2023-05-18 8:21 ` [PATCH for-next v5 5/7] RDMA/rxe: Allow registering MRs for On-Demand Paging Daisuke Matsuda
2023-05-19 17:09 ` Bob Pearson
2023-06-12 16:18 ` Jason Gunthorpe
2023-07-19 6:00 ` Daisuke Matsuda (Fujitsu)
2023-07-21 18:46 ` Jason Gunthorpe
2023-05-18 8:21 ` [PATCH for-next v5 6/7] RDMA/rxe: Add support for Send/Recv/Write/Read with ODP Daisuke Matsuda
2023-05-19 17:10 ` Bob Pearson
2023-05-19 17:10 ` Bob Pearson
2023-06-12 16:22 ` Jason Gunthorpe
2023-07-19 6:01 ` Daisuke Matsuda (Fujitsu)
2023-09-08 6:35 ` Daisuke Matsuda (Fujitsu)
2023-09-08 13:14 ` Jason Gunthorpe
2023-05-18 8:21 ` [PATCH for-next v5 7/7] RDMA/rxe: Add support for the traditional Atomic operations " Daisuke Matsuda
2023-05-22 18:49 ` Bob Pearson
2023-05-19 6:41 ` [PATCH for-next v5 0/7] On-Demand Paging on SoftRoCE Guoqing Jiang
2023-05-19 9:57 ` Daisuke Matsuda (Fujitsu)
2023-05-19 10:20 ` Guoqing Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=660e05c8-9016-f97a-1af3-341eec8e911e@gmail.com \
--to=rpearsonhpe@gmail.com \
--cc=jgg@nvidia.com \
--cc=leonro@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=lizhijian@fujitsu.com \
--cc=matsuda-daisuke@fujitsu.com \
--cc=y-goto@fujitsu.com \
--cc=yangx.jy@fujitsu.com \
--cc=zyjzyj2000@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®