From: Li Zetao <lizetao1@huawei.com>
To: Zhihao Cheng <chengzhihao1@huawei.com>, <richard@nod.at>,
<kent.overstreet@linux.dev>, <agruenba@redhat.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-mtd@lists.infradead.org>
Subject: Re: [RFC PATCH 2/5] ubifs: Initialize or update ACLs for inode
Date: Fri, 22 Mar 2024 19:57:24 +0800 [thread overview]
Message-ID: <661736fb-bb3c-3519-1f4b-44dff285ea0b@huawei.com> (raw)
In-Reply-To: <2991c168-723d-48ef-8420-61e22a897239@huawei.com>
Hi,
On 2024/3/21 11:47, Zhihao Cheng wrote:
> 在 2024/3/20 0:16, Li Zetao 写道:
>> There are two scenarios where ACL needs to be updated, the first one
>> is when creating the inode, and the second one is in the chmod process.
>> When creating directories/files/device node/tmpfile, ACLs needs to be
>> initialized, but symlink do not.Why not support symlink? It looks like
>> many filesystems(eg. ext4, f2fs,
> btrfs) support it, except xfs.
Thanks for the reviews, but this is inconsistent with my understanding.
I think most file systems in Linux do not support it, because most file
systems do not register the get/set functions of ACLs for symlink
operations. And the posix_acl_create() will determine that it is a
symlink type inode, and then skip the creation process. But except for
bcachefs, it may be to solve the problem of certain scenarios, so it
would be nice if anyone could explain it to us.
>>
>> Signed-off-by: Li Zetao <lizetao1@huawei.com>
>> ---
>> fs/ubifs/dir.c | 16 ++++++++++++++++
>> fs/ubifs/file.c | 4 ++++
>> 2 files changed, 20 insertions(+)
>>
>> diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
>> index 551148de66cd..dfb6823cc953 100644
>> --- a/fs/ubifs/dir.c
>> +++ b/fs/ubifs/dir.c
>> @@ -316,6 +316,10 @@ static int ubifs_create(struct mnt_idmap *idmap,
>> struct inode *dir,
>> goto out_fname;
>> }
>> + err = ubifs_init_acl(inode, dir);
>> + if (err)
>> + goto out_inode;
>> +
> Attention, a new inconsistent problem point is imported by acl xattr
> creation. See https://bugzilla.kernel.org/show_bug.cgi?id=218309. @Richard
This problem is indeed a bit tricky.
>> err = ubifs_init_security(dir, inode, &dentry->d_name);
>> if (err)
>> goto out_inode;
>> @@ -466,6 +470,10 @@ static int ubifs_tmpfile(struct mnt_idmap *idmap,
>> struct inode *dir,
>> }
>> ui = ubifs_inode(inode);
>> + err = ubifs_init_acl(inode, dir);
>> + if (err)
>> + goto out_inode;
>> +
>> err = ubifs_init_security(dir, inode, &dentry->d_name);
>> if (err)
>> goto out_inode;
>> @@ -1013,6 +1021,10 @@ static int ubifs_mkdir(struct mnt_idmap *idmap,
>> struct inode *dir,
>> goto out_fname;
>> }
>> + err = ubifs_init_acl(inode, dir);
>> + if (err)
>> + goto out_inode;
>> +
>> err = ubifs_init_security(dir, inode, &dentry->d_name);
>> if (err)
>> goto out_inode;
>> @@ -1108,6 +1120,10 @@ static int ubifs_mknod(struct mnt_idmap *idmap,
>> struct inode *dir,
>> ui->data = dev;
>> ui->data_len = devlen;
>> + err = ubifs_init_acl(inode, dir);
>> + if (err)
>> + goto out_inode;
>> +
>> err = ubifs_init_security(dir, inode, &dentry->d_name);
>> if (err)
>> goto out_inode;
> The whiteout inode is not set acl for rename(WHITEOUT) operation. It
> looks like many filesystems(eg. ext4, f2fs, btrfs) support it, except
> xfs. In my opinion, whiteout is a char dev, since char/block device is
> supported, why not support whiteout?
>
> If we support whiteout, we should make sure that the whiteout renameing
> operation is atomic[1]. But I cannot come up with an idea how to combine
> whiteout xattr(acl) creation and whiteout file creation into an atomic
> operation, just like problem mentioned in [2],
Yes, thanks, I have fixed it in v2 version.
>
> [1]
> https://lore.kernel.org/linux-mtd/20211227032246.2886878-6-chengzhihao1@huawei.com/
> [2] https://bugzilla.kernel.org/show_bug.cgi?id=218309
>> diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
>> index 5029eb3390a5..8f964f8b0f96 100644
>> --- a/fs/ubifs/file.c
>> +++ b/fs/ubifs/file.c
>> @@ -41,6 +41,7 @@
>> #include <linux/mount.h>
>> #include <linux/slab.h>
>> #include <linux/migrate.h>
>> +#include <linux/posix_acl.h>
>> static int read_block(struct inode *inode, void *addr, unsigned int
>> block,
>> struct ubifs_data_node *dn)
>> @@ -1298,6 +1299,9 @@ int ubifs_setattr(struct mnt_idmap *idmap,
>> struct dentry *dentry,
>> else
>> err = do_setattr(c, inode, attr);
>> + if (!err && (attr->ia_valid & ATTR_MODE))
>> + err = posix_acl_chmod(idmap, dentry, inode->i_mode);
>> +
>> return err;
>> }
>>
>
next prev parent reply other threads:[~2024-03-22 11:57 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-19 16:16 [RFC PATCH 0/5] ubifs: Support POSIX Access Control Lists (ACLs) Li Zetao
2024-03-19 16:16 ` [RFC PATCH 1/5] ubifs: Implement " Li Zetao
2024-03-21 2:55 ` Zhihao Cheng
2024-03-22 11:36 ` Li Zetao
2024-03-19 16:16 ` [RFC PATCH 2/5] ubifs: Initialize or update ACLs for inode Li Zetao
2024-03-21 3:47 ` Zhihao Cheng
2024-03-22 11:57 ` Li Zetao [this message]
2024-03-22 12:07 ` Zhihao Cheng
2024-03-19 16:16 ` [RFC PATCH 3/5] ubifs: Support accessing ACLs through inode_operations Li Zetao
2024-03-19 16:16 ` [RFC PATCH 4/5] ubifs: Introduce ACLs mount options Li Zetao
2024-03-21 6:49 ` Zhihao Cheng
2024-03-22 12:05 ` Li Zetao
2024-03-22 12:10 ` Zhihao Cheng
2024-03-19 16:16 ` [RFC PATCH 5/5] ubifs: Add ACLs config option Li Zetao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=661736fb-bb3c-3519-1f4b-44dff285ea0b@huawei.com \
--to=lizetao1@huawei.com \
--cc=agruenba@redhat.com \
--cc=chengzhihao1@huawei.com \
--cc=kent.overstreet@linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®