mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Arnd Bergmann" <arnd@arndb.de>
To: "Will Deacon" <will@kernel.org>, linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, "Ard Biesheuvel" <ardb@kernel.org>,
	"Eric Biggers" <ebiggers@kernel.org>,
	"Daniel Borkmann" <daniel@iogearbox.net>,
	"Catalin Marinas" <catalin.marinas@arm.com>,
	"Alexei Starovoitov" <ast@kernel.org>,
	"Oliver Upton" <oupton@kernel.org>,
	"Herbert Xu" <herbert@gondor.apana.org.au>,
	"Marc Zyngier" <maz@kernel.org>,
	"Linus Walleij" <linusw@kernel.org>
Subject: Re: [PATCH 00/12] arm64: Remove unused big-endian support
Date: Tue, 11 Aug 2026 17:11:47 +0200	[thread overview]
Message-ID: <6632712f-7782-4580-84c0-62124a016f46@app.fastmail.com> (raw)
In-Reply-To: <20260811140132.22778-1-will@kernel.org>

On Tue, Aug 11, 2026, at 16:01, Will Deacon wrote:
> Hi folks,
>
> Big-endian support on arm64 (CONFIG_CPU_BIG_ENDIAN) has depended on
> BROKEN since 1cf89b6bf660 ("arm64: Kconfig: Make CPU_BIG_ENDIAN depend
> on BROKEN") and has already seen some clean-up patches removing some of
> the unused support code (e.g. 5276ea17a23c ("lib/crc: arm64: Assume a
> little-endian kernel")).
>
> Finish the job, and remove the remaining big-endian support code from
> arm64. Note that the SETEND emulation for 32-bit tasks remains and so
> some of the mixed-endian EL0 helpers are retained.

I had not expected the removal to come this soon, but I'm not
complaining about that. I assume you are planning this for 7.4,
leaving 7.3-LTS to still have the code in case someone wants to
still use it, right?

Not sure if you saw

https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/arch/arm/mm/Kconfig?id=fe91e4e9da70765420538d9cbcf6d9a970237a8d

https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/arch/arm/mach-ixp4xx/Kconfig?id=2262f02ac2aa545560a7f182c8e6b5c98e72763c

so for 7.3, we have marked big-endian mode in arm32 as deprecated
as well, and also managed to get ixp4xx working again in little-endian
mode, which was slightly broken for a few years. It may be good to
add a reference to your series for context.

My suggestions there was to possibly remove arm32 big-endian mode at
the same time as on arm64, but that does feel a little rushed if
ixp4xx only has one release of supporting both, and removing be8
but leaving be32 for a little while longer is probably not worth it.

> I've broken this down into fairly coarse chunks, as it seemed a lot
> easier to manage than one giant patch (even with the Kconfig being
> effectively disabled already) and not all of it is just mindless
> deletion. Despite that, I'm anticipating the whole thing going via the
> arm64 tree.

I would have done even larger patches, this does already feel fairly
fine-grained to me ;-). I had a look at the individual patches to make
sure this all makes sense, and I found nothing wrong here.

For a 7.4 (or later) merge:

Acked-by: Arnd Bergmann <arnd@arndb.de>

There are also a few arm64 specific drivers that I think no
longer need a dependency, but none of that is important:

diff --git a/drivers/crypto/hisilicon/Kconfig b/drivers/crypto/hisilicon/Kconfig
index aeff08ccbadd..1ae7b146b241 100644
--- a/drivers/crypto/hisilicon/Kconfig
+++ b/drivers/crypto/hisilicon/Kconfig
@@ -53,7 +53,6 @@ config CRYPTO_DEV_HISI_ZIP
 	tristate "Support for HiSilicon ZIP accelerator"
 	depends on PCI_MSI
 	depends on ARM64 || (COMPILE_TEST && 64BIT)
-	depends on !CPU_BIG_ENDIAN || COMPILE_TEST
 	depends on UACCE || UACCE=n
 	depends on ACPI
 	select CRYPTO_DEV_HISI_QM
diff --git a/drivers/firmware/qcom/Kconfig b/drivers/firmware/qcom/Kconfig
index c7f8413ab996..f0c1061b0005 100644
--- a/drivers/firmware/qcom/Kconfig
+++ b/drivers/firmware/qcom/Kconfig
@@ -18,7 +18,6 @@ config QCOM_PAS_TEE
 	tristate "Qualcomm PAS TEE interface driver"
 	select QCOM_PAS
 	depends on TEE
-	depends on !CPU_BIG_ENDIAN
 	default m if ARCH_QCOM
 	help
 	  Enable the generic Peripheral Authentication Service (PAS) provided
diff --git a/drivers/firmware/tegra/Kconfig b/drivers/firmware/tegra/Kconfig
index 3a9162706439..e9271d706726 100644
--- a/drivers/firmware/tegra/Kconfig
+++ b/drivers/firmware/tegra/Kconfig
@@ -14,7 +14,6 @@ config TEGRA_IVC
 config TEGRA_BPMP
 	bool "Tegra BPMP driver"
 	depends on ARCH_TEGRA && TEGRA_HSP_MBOX
-	depends on !CPU_BIG_ENDIAN
 	select TEGRA_IVC
 	help
 	  BPMP (Boot and Power Management Processor) is designed to off-loading
diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig
index 8b6fdb9ad1ea..318e7b604342 100644
--- a/drivers/soc/tegra/Kconfig
+++ b/drivers/soc/tegra/Kconfig
@@ -102,7 +102,6 @@ config ARCH_TEGRA_210_SOC
 config ARCH_TEGRA_186_SOC
 	bool "NVIDIA Tegra186 SoC"
 	default ARCH_TEGRA
-	depends on !CPU_BIG_ENDIAN
 	select PINCTRL_TEGRA186
 	select MAILBOX
 	select SOC_TEGRA_PMC
@@ -117,7 +116,6 @@ config ARCH_TEGRA_186_SOC
 config ARCH_TEGRA_194_SOC
 	bool "NVIDIA Tegra194 SoC"
 	default ARCH_TEGRA
-	depends on !CPU_BIG_ENDIAN
 	select MAILBOX
 	select PINCTRL_TEGRA194
 	select SOC_TEGRA_PMC
@@ -127,7 +125,6 @@ config ARCH_TEGRA_194_SOC
 config ARCH_TEGRA_234_SOC
 	bool "NVIDIA Tegra234 SoC"
 	default ARCH_TEGRA
-	depends on !CPU_BIG_ENDIAN
 	select MAILBOX
 	select PINCTRL_TEGRA234
 	select SOC_TEGRA_PMC
@@ -137,7 +134,6 @@ config ARCH_TEGRA_234_SOC
 config ARCH_TEGRA_238_SOC
 	bool "NVIDIA Tegra238 SoC"
 	default ARCH_TEGRA
-	depends on !CPU_BIG_ENDIAN
 	select MAILBOX
 	select SOC_TEGRA_PMC
 	help
@@ -152,7 +148,6 @@ config ARCH_TEGRA_241_SOC
 config ARCH_TEGRA_264_SOC
 	bool "NVIDIA Tegra264 SoC"
 	default ARCH_TEGRA
-	depends on !CPU_BIG_ENDIAN
 	select MAILBOX
 	select SOC_TEGRA_PMC
 	help
diff --git a/drivers/tee/qcomtee/Kconfig b/drivers/tee/qcomtee/Kconfig
index 9f19dee08db4..bd9be3e9a9ac 100644
--- a/drivers/tee/qcomtee/Kconfig
+++ b/drivers/tee/qcomtee/Kconfig
@@ -3,7 +3,6 @@
 config QCOMTEE
 	tristate "Qualcomm TEE Support"
 	depends on ARCH_QCOM || COMPILE_TEST
-	depends on !CPU_BIG_ENDIAN
 	select QCOM_SCM
 	select QCOM_TZMEM_MODE_SHMBRIDGE
 	help

  parent reply	other threads:[~2026-08-11 15:12 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-11 14:01 Will Deacon
2026-08-11 14:01 ` [PATCH 01/12] selftests/arm64: Remove " Will Deacon
2026-08-11 14:01 ` [PATCH 02/12] arm64: bpf: Remove big-endian support from the JIT compiler Will Deacon
2026-08-11 14:01 ` [PATCH 03/12] arm64: crypto: Assume a little-endian kernel Will Deacon
2026-08-11 14:01 ` [PATCH 04/12] arm64: lib: Assume a little-endian kernel in custom library routines Will Deacon
2026-08-11 14:01 ` [PATCH 05/12] arm64: lib: Assume a little-endian kernel in optimised string routines Will Deacon
2026-08-11 14:01 ` [PATCH 06/12] arm64: assembler: Remove endianness helper macros Will Deacon
2026-08-11 15:04   ` Ard Biesheuvel
2026-08-16  9:42     ` Will Deacon
2026-08-20 13:19       ` Will Deacon
2026-08-20 13:27         ` Ard Biesheuvel
2026-08-20 13:45           ` Will Deacon
2026-08-20 13:50             ` Ard Biesheuvel
2026-08-21  9:23               ` Will Deacon
2026-08-11 14:01 ` [PATCH 07/12] arm64: vdso32: Always build compat vDSO object as little-endian Will Deacon
2026-08-11 14:01 ` [PATCH 08/12] KVM: arm64: Remove support for a big-endian hypervisor object Will Deacon
2026-08-11 14:01 ` [PATCH 09/12] arm64: Remove all usage of CONFIG_CPU_BIG_ENDIAN Will Deacon
2026-08-11 14:49   ` Marc Zyngier
2026-08-11 14:01 ` [PATCH 10/12] arm64: Remove all usage of __AARCH64EB__ Will Deacon
2026-08-11 14:01 ` [PATCH 11/12] arm64: image: Remove endianness handling for generating image header Will Deacon
2026-08-11 14:01 ` [PATCH 12/12] arm64: Kbuild: Remove vestigial big-endian support Will Deacon
2026-08-11 14:54 ` [PATCH 00/12] arm64: Remove unused " Marc Zyngier
2026-08-11 15:11 ` Arnd Bergmann [this message]
2026-08-16  9:47   ` Will Deacon
2026-08-16 10:15     ` Arnd Bergmann
2026-08-18 10:33       ` Will Deacon
2026-08-18 17:24   ` Eric Biggers
2026-08-11 15:43 ` Catalin Marinas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6632712f-7782-4580-84c0-62124a016f46@app.fastmail.com \
    --to=arnd@arndb.de \
    --cc=ardb@kernel.org \
    --cc=ast@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=daniel@iogearbox.net \
    --cc=ebiggers@kernel.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=oupton@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®