Re: [PATCH] ARM: dts: stm32: stm32mp151c-plyaqm: Use correct dai-format property

[Alexandre TORGUE <alexandre.torgue@foss.st.com>]

Hi Jihed

On 8/31/25 00:51, Jihed Chaibi wrote:
> The stm32-i2s binding inherits from the standard audio-graph-port
> schema for its 'port' subnode, audio-graph-port requires the use
> of the 'dai-format' property. The stm32mp151c-plyaqm dts file was
> using the non-standard name 'format'.
> 
> Correct the property name to 'dai-format' to fix the dtbs_check
> validation error.
> 
> Fixes: 9365fa46be358 ("ARM: dts: stm32: Add Plymovent AQM devicetree")
> Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
> ---
>   arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
> index 39a3211c613..55fe916740d 100644
> --- a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
> +++ b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
> @@ -239,7 +239,7 @@ &i2s1 {
>   
>   	i2s1_port: port {
>   		i2s1_endpoint: endpoint {
> -			format = "i2s";
> +			dai-format = "i2s";
>   			mclk-fs = <256>;
>   			remote-endpoint = <&codec_endpoint>;
>   		};

Applied on stm32-next.

Thanks
Alex