mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Schrempf Frieder <frieder.schrempf@kontron.de>
To: Jeff Kletsky <lede@allycomm.com>,
	Boris Brezillon <bbrezillon@kernel.org>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>
Cc: "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
Date: Wed, 15 May 2019 06:53:31 +0000	[thread overview]
Message-ID: <6705bff0-e929-301a-485e-1a506cccad32@kontron.de> (raw)
In-Reply-To: <20190514215315.19228-4-lede@allycomm.com>

On 14.05.19 23:53, Jeff Kletsky wrote:
> From: Jeff Kletsky <git-commits@allycomm.com>
> 
> The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
> and, while it has the same logical layout as the E-series devices,
> it differs in the SPI interfacing in significant ways.
> 
> This support is contingent on previous commits to:
> 
>    * Add support for two-byte device IDs
>    * Add #define-s for page-read ops with three-byte addresses
> 
> http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
> 
> Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>

Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>

> ---
>   drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
>   1 file changed, 64 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
> index 0b49d8264bef..d6497ac4c5d8 100644
> --- a/drivers/mtd/nand/spi/gigadevice.c
> +++ b/drivers/mtd/nand/spi/gigadevice.c
> @@ -9,11 +9,17 @@
>   #include <linux/mtd/spinand.h>
>   
>   #define SPINAND_MFR_GIGADEVICE			0xC8
> +
>   #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
>   #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
>   
>   #define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
>   
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK		(7 << 4)
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS	(0 << 4)
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS	(1 << 4)
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR	(7 << 4)
> +
>   static SPINAND_OP_VARIANTS(read_cache_variants,
>   		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
>   		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
> @@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
>   		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
>   		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
>   
> +static SPINAND_OP_VARIANTS(read_cache_variants_f,
> +		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
> +
>   static SPINAND_OP_VARIANTS(write_cache_variants,
>   		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
>   		SPINAND_PROG_LOAD(true, 0, NULL, 0));
> @@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
>   	return 0;
>   }
>   
> +static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
> +	.ecc = gd5fxgq4xa_ooblayout_ecc,
> +	.free = gd5fxgq4xa_ooblayout_free,
> +};
> +
>   static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
>   					 u8 status)
>   {
> @@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
>   	return -EINVAL;
>   }
>   
> -static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
> +static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
>   				       struct mtd_oob_region *region)
>   {
>   	if (section)
> @@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
>   	return 0;
>   }
>   
> -static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
> +static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
>   					struct mtd_oob_region *region)
>   {
>   	if (section)
> @@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
>   	return 0;
>   }
>   
> +static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
> +	.ecc = gd5fxgq4_variant2_ooblayout_ecc,
> +	.free = gd5fxgq4_variant2_ooblayout_free,
> +};
> +
>   static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
>   					u8 status)
>   {
> @@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
>   	return -EINVAL;
>   }
>   
> -static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
> -	.ecc = gd5fxgq4xa_ooblayout_ecc,
> -	.free = gd5fxgq4xa_ooblayout_free,
> -};
> +static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
> +					u8 status)
> +{
> +	switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
> +	case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
> +		return 0;
>   
> -static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
> -	.ecc = gd5fxgq4uexxg_ooblayout_ecc,
> -	.free = gd5fxgq4uexxg_ooblayout_free,
> -};
> +	case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
> +		return 3;
> +
> +	case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
> +		return -EBADMSG;
> +
> +	default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
> +		return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
> +	}
> +
> +	return -EINVAL;
> +}
>   
>   static const struct spinand_info gigadevice_spinand_table[] = {
>   	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
> @@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = {
>   					      &write_cache_variants,
>   					      &update_cache_variants),
>   		     0,
> -		     SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
> +		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
>   				     gd5fxgq4uexxg_ecc_get_status)),
> +	SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
> +		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     0,
> +		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
> +				     gd5fxgq4ufxxg_ecc_get_status)),
>   };
>   
>   static int gigadevice_spinand_detect(struct spinand_device *spinand)
>   {
>   	u8 *id = spinand->id.data;
> +	u16 did;
>   	int ret;
>   
>   	/*
> -	 * For GD NANDs, There is an address byte needed to shift in before IDs
> -	 * are read out, so the first byte in raw_id is dummy.
> +	 * Earlier GDF5-series devices (A,E) return [0][MID][DID]
> +	 * Later (F) devices return [MID][DID1][DID2]
>   	 */
> -	if (id[1] != SPINAND_MFR_GIGADEVICE)
> +
> +	if (id[0] == SPINAND_MFR_GIGADEVICE)
> +		did = (id[1] << 8) + id[2];
> +	else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
> +		did = id[2];
> +	else
>   		return 0;
>   
>   	ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
>   				     ARRAY_SIZE(gigadevice_spinand_table),
> -				     id[2]);
> +				     did);
>   	if (ret)
>   		return ret;
>   
> 

      reply	other threads:[~2019-05-15  6:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190514215315.19228-1-lede@allycomm.com>
2019-05-14 21:53 ` [PATCH v2 1/3] mtd: spinand: Add #define-s for page-read ops with three-byte addresses Jeff Kletsky
2019-05-15  6:17   ` Marek Vasut
2019-05-15  6:49     ` Schrempf Frieder
2019-05-19 20:27       ` Jeff Kletsky
2019-05-20 12:16         ` Miquel Raynal
2019-05-15  6:51   ` Schrempf Frieder
2019-05-14 21:53 ` [PATCH v2 2/3] mtd: spinand: Add support for two-byte device IDs Jeff Kletsky
2019-05-15  6:52   ` Schrempf Frieder
2019-05-14 21:53 ` [PATCH v2 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG Jeff Kletsky
2019-05-15  6:53   ` Schrempf Frieder [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6705bff0-e929-301a-485e-1a506cccad32@kontron.de \
    --to=frieder.schrempf@kontron.de \
    --cc=bbrezillon@kernel.org \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=lede@allycomm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®