Re: pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid

["Kuppuswamy, Sathyanarayanan" <sathyanarayanan.kuppuswamy@linux.intel.com>]

Hi,

On 12/7/20 5:08 AM, Paul Menzel wrote:
> [Bringing the issue up on the list in case the Linux Bugzilla is not monitored/used.]
> 
> 
> Dear Linux folks,
> 
> 
> On Intel Tiger Lake Dell laptop, Linux logs the error below [1].
> 
>      [    0.507307] pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid
>      [    0.508835] pci 0000:00:07.2: DPC: RP PIO log size 0 is invalid
> 
>      $ lspci -nn -s 00:07
>      00:07.0 PCI bridge [0604]: Intel Corporation Tiger Lake-LP Thunderbolt PCI Express Root Port #0 
> [8086:9a23] (rev 01)
>      00:07.2 PCI bridge [0604]: Intel Corporation Tiger Lake-LP Thunderbolt PCI Express Root Port #2 
> [8086:9a27] (rev 01)
> 
> Commit 2700561817 (PCI/DPC: Cache DPC capabilities in pci_init_capabilities()) [1] probably 
> introduced it in Linux 5.7.
> 
> What does this error actually mean?
> 
>      pdev->dpc_rp_log_size = (cap & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8;
>      if (pdev->dpc_rp_log_size < 4 || pdev->dpc_rp_log_size > 9) {
>          pci_err(pdev, "RP PIO log size %u is invalid\n",
>              pdev->dpc_rp_log_size);
>          pdev->dpc_rp_log_size = 0;
As per PCIe spec r5.0, sec 7.9.15.2, valid RP log size is 4 or greater. Please see
the text copied from spec

- - - -
RP PIO Log Size - This field indicates how many DWORDs are allocated for the RP
PIO log registers, comprised by the RP PIO Header Log, the RP PIO ImpSpec Log,
and RP PIO TLP Prefix Log. If the Root Port supports RP Extensions for DPC, the
value of this field must be 4 or greater; otherwise, the value of
this field must be 0. See Section 7.9.15.11 , Section 7.9.15.12 , and Section 7.9.15.13 .
- - - -

In this case, since "(!(cap & PCI_EXP_DPC_CAP_RP_EXT))" condition is false, RP
EXT is supported. If RP EXT is supported, valid log size should be at-least 4.


>      }
> 
> (I guess `cap & PCI_EXP_DPC_RP_PIO_LOG_SIZE` is zero too?)
> 
> Is it a firmware issue or a hardware issue?
I think this could be hardware issue.
> 
> 
> Kind regards,
> 
> Paul
> 
> 
> [1]: https://bugzilla.kernel.org/show_bug.cgi?id=209943
>       "pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid"
> [2]: 
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=27005618178ef9e9bf9c42fd91101771c92e9308 
> 

-- 
Sathyanarayanan Kuppuswamy
Linux Kernel Developer