mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Ravulapati Vishnu vardhan rao  <Vishnuvardhanrao.Ravulapati@amd.com>
Cc: "moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER
	MANAGEM..."  <alsa-devel@alsa-project.org>,
	Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	open list <linux-kernel@vger.kernel.org>,
	Takashi Iwai <tiwai@suse.com>, YueHaibing <yuehaibing@huawei.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Akshu.Agrawal@amd.com, Sanju R Mehta <sanju.mehta@amd.com>,
	Mark Brown <broonie@kernel.org>,
	djkurtz@google.com, Vijendar Mukunda <Vijendar.Mukunda@amd.com>,
	Alex Deucher <alexander.deucher@amd.com>,
	Colin Ian King <colin.king@canonical.com>
Subject: Re: [alsa-devel] [RESEND PATCH v2 2/7] ASoC: amd: Refactoring of DAI from DMA driver
Date: Wed, 6 Nov 2019 10:31:38 -0600	[thread overview]
Message-ID: <6768c0eb-003c-398b-6b44-8167d44b3cfe@linux.intel.com> (raw)
In-Reply-To: <1573137364-5592-3-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com>



On 11/7/19 8:35 AM, Ravulapati Vishnu vardhan rao wrote:
> Asoc: PCM DMA driver should only have dma ops.
> So Removed all DAI related functionality.
> Refactoring the PCM DMA diver code.
> Added new file containing only DAI ops.
> 
> Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
> ---
>   sound/soc/amd/raven/Makefile        |   2 +
>   sound/soc/amd/raven/acp3x-i2s.c     | 268 ++++++++++++++++++++++++++++++++++++
>   sound/soc/amd/raven/acp3x-pcm-dma.c | 232 ++-----------------------------
>   sound/soc/amd/raven/acp3x.h         |  42 ++++++
>   4 files changed, 326 insertions(+), 218 deletions(-)
>   create mode 100644 sound/soc/amd/raven/acp3x-i2s.c
> 
> diff --git a/sound/soc/amd/raven/Makefile b/sound/soc/amd/raven/Makefile
> index 108d1ac..8eef292 100644
> --- a/sound/soc/amd/raven/Makefile
> +++ b/sound/soc/amd/raven/Makefile
> @@ -1,6 +1,8 @@
>   # SPDX-License-Identifier: GPL-2.0+
>   # Raven Ridge platform Support
>   snd-pci-acp3x-objs	:= pci-acp3x.o
> +snd-acp3x-i2s-objs	:= acp3x-i2s.o
>   snd-acp3x-pcm-dma-objs	:= acp3x-pcm-dma.o
>   obj-$(CONFIG_SND_SOC_AMD_ACP3x)	 += snd-pci-acp3x.o
> +obj-$(CONFIG_SND_SOC_AMD_ACP3x)	 += snd-acp3x-i2s.o
>   obj-$(CONFIG_SND_SOC_AMD_ACP3x)	 += snd-acp3x-pcm-dma.o
> diff --git a/sound/soc/amd/raven/acp3x-i2s.c b/sound/soc/amd/raven/acp3x-i2s.c
> new file mode 100644
> index 0000000..728e757
> --- /dev/null
> +++ b/sound/soc/amd/raven/acp3x-i2s.c
> @@ -0,0 +1,268 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// AMD ALSA SoC PCM Driver
> +//
> +//Copyright 2016 Advanced Micro Devices, Inc.
> +
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/pm_runtime.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dai.h>
> +#include <linux/dma-mapping.h>
> +
> +#include "acp3x.h"
> +
> +#define DRV_NAME "acp3x-i2s"
> +
> +static int acp3x_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
> +{
> +
> +	struct i2s_dev_data *adata = snd_soc_dai_get_drvdata(cpu_dai);
> +
> +	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> +
> +	case SND_SOC_DAIFMT_I2S:
> +		adata->tdm_mode = false;
> +		break;
> +	case SND_SOC_DAIFMT_DSP_A:
> +			adata->tdm_mode = true;
> +			break;

alignment is off

> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int acp3x_i2s_set_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask,
> +		u32 rx_mask, int slots, int slot_width)
> +{
> +	u32 val = 0;

init not needed

> +	u16 slot_len;
> +
> +	struct i2s_dev_data *adata = snd_soc_dai_get_drvdata(cpu_dai);
> +
> +	switch (slot_width) {
> +	case SLOT_WIDTH_8:
> +		slot_len = 8;
> +		break;
> +	case SLOT_WIDTH_16:
> +		slot_len = 16;
> +		break;
> +	case SLOT_WIDTH_24:
> +		slot_len = 24;
> +		break;
> +	case SLOT_WIDTH_32:
> +		slot_len = 0;

That looks suspicious or a comment would help.

> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	val = rv_readl(adata->acp3x_base + mmACP_BTTDM_ITER);
> +	rv_writel((val | 0x2), adata->acp3x_base + mmACP_BTTDM_ITER);
> +	val = rv_readl(adata->acp3x_base + mmACP_BTTDM_IRER);
> +	rv_writel((val | 0x2), adata->acp3x_base + mmACP_BTTDM_IRER);
> +
> +	val = (FRM_LEN | (slots << 15) | (slot_len << 18));
> +	rv_writel(val, adata->acp3x_base + mmACP_BTTDM_TXFRMT);
> +	rv_writel(val, adata->acp3x_base + mmACP_BTTDM_RXFRMT);
> +
> +	adata->tdm_fmt = val;
> +	return 0;
> +}
> +
> +static int acp3x_i2s_hwparams(struct snd_pcm_substream *substream,
> +		struct snd_pcm_hw_params *params,
> +		struct snd_soc_dai *dai)
> +{
> +	u32 val = 0;
> +	struct i2s_stream_instance *rtd = substream->runtime->private_data;
> +
> +	switch (params_format(params)) {
> +	case SNDRV_PCM_FORMAT_U8:
> +	case SNDRV_PCM_FORMAT_S8:
> +		rtd->xfer_resolution = 0x0;
> +		break;
> +	case SNDRV_PCM_FORMAT_S16_LE:
> +		rtd->xfer_resolution = 0x02;
> +		break;
> +	case SNDRV_PCM_FORMAT_S24_LE:
> +		rtd->xfer_resolution = 0x04;
> +		break;
> +	case SNDRV_PCM_FORMAT_S32_LE:
> +		rtd->xfer_resolution = 0x05;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +	val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_ITER);
> +	val = val | (rtd->xfer_resolution  << 3);
> +	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> +		rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_ITER);
> +	else
> +		rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_IRER);

for the capture case, you didn't initially read from IRER, so you are 
doing a read-modify-write for playback but write for capture.

maybe that's legit but a comment would help then.

> +
> +	return 0;
> +}
> +
> +static int acp3x_i2s_trigger(struct snd_pcm_substream *substream,
> +		int cmd, struct snd_soc_dai *dai)
> +{
> +	int ret = 0;
> +	struct i2s_stream_instance *rtd = substream->runtime->private_data;
> +	u32 val, period_bytes;
> +
> +	period_bytes = frames_to_bytes(substream->runtime,
> +			substream->runtime->period_size);
> +	switch (cmd) {
> +	case SNDRV_PCM_TRIGGER_START:
> +	case SNDRV_PCM_TRIGGER_RESUME:
> +	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> +		rtd->bytescount = acp_get_byte_count(rtd,
> +						substream->stream);
> +		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> +			rv_writel(period_bytes, rtd->acp3x_base +
> +					mmACP_BT_TX_INTR_WATERMARK_SIZE);
> +			val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_ITER);
> +			val = val | BIT(0);
> +			rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_ITER);
> +		} else {
> +			rv_writel(period_bytes, rtd->acp3x_base +
> +					mmACP_BT_RX_INTR_WATERMARK_SIZE);
> +			val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_IRER);
> +			val = val | BIT(0);
> +			rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_IRER);

and here you separated the reads for ITER and IRER, so my comment above 
likely points to a mistake.

> +		}
> +		rv_writel(1, rtd->acp3x_base + mmACP_BTTDM_IER);
> +		break;
> +	case SNDRV_PCM_TRIGGER_STOP:
> +	case SNDRV_PCM_TRIGGER_SUSPEND:
> +	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> +		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> +			val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_ITER);
> +			val = val & ~BIT(0);
> +			rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_ITER);
> +		} else {
> +			val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_IRER);
> +			val = val & ~BIT(0);
> +			rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_IRER);
> +		}
> +		rv_writel(0, rtd->acp3x_base + mmACP_BTTDM_IER);
> +		break;
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static struct snd_soc_dai_ops acp3x_i2s_dai_ops = {
> +	.hw_params = acp3x_i2s_hwparams,
> +	.trigger   = acp3x_i2s_trigger,
> +	.set_fmt = acp3x_i2s_set_fmt,
> +	.set_tdm_slot = acp3x_i2s_set_tdm_slot,
> +};
> +
> +static const struct snd_soc_component_driver acp3x_dai_component = {
> +	.name           = "acp3x-i2s",
> +};
> +
> +static struct snd_soc_dai_driver acp3x_i2s_dai = {
> +	.playback = {
> +		.rates = SNDRV_PCM_RATE_8000_96000,
> +		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8 |
> +			SNDRV_PCM_FMTBIT_U8 |
> +			SNDRV_PCM_FMTBIT_S24_LE |
> +			SNDRV_PCM_FMTBIT_S32_LE,
> +		.channels_min = 2,
> +		.channels_max = 8,
> +
> +		.rate_min = 8000,
> +		.rate_max = 96000,
> +	},
> +	.capture = {
> +		.rates = SNDRV_PCM_RATE_8000_48000,
> +		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8 |
> +			SNDRV_PCM_FMTBIT_U8 |
> +			SNDRV_PCM_FMTBIT_S24_LE |
> +			SNDRV_PCM_FMTBIT_S32_LE,
> +		.channels_min = 2,
> +		.channels_max = 2,
> +		.rate_min = 8000,
> +		.rate_max = 48000,
> +	},
> +	.ops = &acp3x_i2s_dai_ops,
> +};
> +
> +
> +static int acp3x_dai_probe(struct platform_device *pdev)
> +{
> +	int status;
> +	struct resource *res;
> +	struct i2s_dev_data *adata;
> +
> +	if (!pdev->dev.platform_data) {
> +		dev_err(&pdev->dev, "platform_data not retrieved\n");
> +		return -ENODEV;
> +	}
> +
> +	adata = devm_kzalloc(&pdev->dev, sizeof(struct i2s_dev_data),
> +			GFP_KERNEL);
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "IORESOURCE_MEM FAILED\n");
> +		return -ENODEV;
> +	}
> +
> +	adata->acp3x_base = devm_ioremap(&pdev->dev, res->start,
> +			resource_size(res));
> +	if (IS_ERR(adata->acp3x_base))
> +		return PTR_ERR(adata->acp3x_base);
> +
> +
> +

extra lines, run checkpatch...

  reply	other threads:[~2019-11-06 16:51 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1573137364-5592-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com>
2019-11-07 14:35 ` [RESEND PATCH v2 1/7] ASoC: amd: Create multiple I2S platform device endpoints Ravulapati Vishnu vardhan rao
2019-11-06 16:17   ` Mark Brown
2019-11-06 16:24   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-07 14:35 ` [RESEND PATCH v2 2/7] ASoC: amd: Refactoring of DAI from DMA driver Ravulapati Vishnu vardhan rao
2019-11-06 16:31   ` Pierre-Louis Bossart [this message]
2019-11-07 14:36 ` [PATCH v2 3/7] ASoC: amd: Enabling I2S instance in DMA and DAI Ravulapati Vishnu vardhan rao
2019-11-06 16:34   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 17:06     ` Mark Brown
2019-11-07 14:36 ` [RESEND PATCH v2 4/7] ASoC: amd: add ACP3x TDM mode support Ravulapati Vishnu vardhan rao
2019-11-07 14:36 ` [RESEND PATCH v2 5/7] ASoC: amd: handle ACP3x i2s-sp watermark interrupt Ravulapati Vishnu vardhan rao
2019-11-07 14:36 ` [PATCH v2 6/7] ASoC: amd: ACP powergating to be done by controller Ravulapati Vishnu vardhan rao
2019-11-06 16:40   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-07 14:36 ` [RESEND PATCH v2 7/7] ASoC: amd: Added ACP3x system resume and runtime pm ops Ravulapati Vishnu vardhan rao
2019-11-06 16:43   ` [alsa-devel] " Pierre-Louis Bossart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6768c0eb-003c-398b-6b44-8167d44b3cfe@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=Akshu.Agrawal@amd.com \
    --cc=Vijendar.Mukunda@amd.com \
    --cc=Vishnuvardhanrao.Ravulapati@amd.com \
    --cc=alexander.deucher@amd.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=colin.king@canonical.com \
    --cc=djkurtz@google.com \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maruthi.bayyavarapu@amd.com \
    --cc=sanju.mehta@amd.com \
    --cc=tiwai@suse.com \
    --cc=yuehaibing@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome