mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Muhammad Bilal <meatuni001@gmail.com>
Cc: "Jorge Lopez" <jorge.lopez2@hp.com>,
	"Hans de Goede" <hansg@kernel.org>,
	"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
	"Thomas Weißschuh" <linux@weissschuh.net>,
	platform-driver-x86@vger.kernel.org,
	LKML <linux-kernel@vger.kernel.org>,
	stable@vger.kernel.org
Subject: Re: [PATCH v4 6/9] platform/x86: hp-bioscfg: fix heap OOB with embedded NUL in store paths
Date: Mon, 5 Oct 2026 16:25:13 +0300 (EEST)	[thread overview]
Message-ID: <67806c30-fb5a-1871-442f-8037a06c1c9c@linux.intel.com> (raw)
In-Reply-To: <20261002191434.58529-7-meatuni001@gmail.com>

On Sat, 3 Oct 2026, Muhammad Bilal wrote:

> The store handlers copy the input with kstrdup(), which stops at the
> first NUL, but pass the full write size to
> hp_enforce_single_line_input(). With an embedded NUL the copy is
> shorter than count, so the helper reads, and can write one byte, past
> the allocation.
> 
> Writing "A\0" followed by 4093 bytes of "B" to current_password makes
> memchr() scan 4093 bytes past a 2-byte copy. On an HP EliteBook 840 G2
> running Linux 7.2.7 all 100 such writes fail with -EINVAL although the
> input has no newline, so memchr() matched one in the heap. A userspace
> replica under ASan reports the same 4095 byte read, 0 bytes after the
> 2-byte region.
> 
> Use kmemdup_nul() so the copy is always count + 1 bytes long.
> 
> Compile tested only.
> 
> Fixes: 5f94f181ca25 ("platform/x86: hp-bioscfg: bioscfg-h")
> Fixes: 8646a3b5ee3a ("platform/x86: hp-bioscfg: passwdobj-attributes")
> Cc: stable@vger.kernel.org
> Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>

I don't understand this change.

What is the usecase for using the input beyond the first NUL?

> ---
> Changes in v4:
>  - New patch
> 
>  drivers/platform/x86/hp/hp-bioscfg/bioscfg.h              | 2 +-
>  drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.h b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.h
> index ac57d6eab..77cb9cac1 100644
> --- a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.h
> +++ b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.h
> @@ -326,7 +326,7 @@ enum hp_wmi_data_elements {
>  		int i;							\
>  		int ret = -EIO;						\
>  									\
> -		attr_value = kstrdup(buf, GFP_KERNEL);			\
> +		attr_value = kmemdup_nul(buf, count, GFP_KERNEL);	\
>  		if (!attr_value)					\
>  			return -ENOMEM;					\
>  									\
> diff --git a/drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c b/drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c
> index a2f50ecbe..6c123d7a5 100644
> --- a/drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c
> +++ b/drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c
> @@ -93,7 +93,7 @@ static int store_password_instance(struct kobject *kobj, const char *buf,
>  	char *buf_cp;
>  	int id, ret = 0;
>  
> -	buf_cp = kstrdup(buf, GFP_KERNEL);
> +	buf_cp = kmemdup_nul(buf, count, GFP_KERNEL);
>  	if (!buf_cp)
>  		return -ENOMEM;
>  
> 

-- 
 i.


  reply	other threads:[~2026-10-05 13:25 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-02 19:14 [PATCH v4 0/9] platform/x86: hp-bioscfg: buffer handling fixes Muhammad Bilal
2026-10-02 19:14 ` [PATCH v4 1/9] platform/x86: hp-bioscfg: fix OOB reads in hp_get_string_from_buffer() Muhammad Bilal
2026-10-03 20:14   ` Andy Shevchenko
2026-10-02 19:14 ` [PATCH v4 2/9] platform/x86: hp-bioscfg: fix non-ASCII truncation " Muhammad Bilal
2026-10-02 19:14 ` [PATCH v4 3/9] platform/x86: hp-bioscfg: return -E2BIG from validate_password_input() Muhammad Bilal
2026-10-02 19:14 ` [PATCH v4 4/9] platform/x86: hp-bioscfg: allow clearing current_password Muhammad Bilal
2026-10-05 13:13   ` Ilpo Järvinen
2026-10-02 19:14 ` [PATCH v4 5/9] platform/x86: hp-bioscfg: fix off-by-one in password length check Muhammad Bilal
2026-10-02 19:14 ` [PATCH v4 6/9] platform/x86: hp-bioscfg: fix heap OOB with embedded NUL in store paths Muhammad Bilal
2026-10-05 13:25   ` Ilpo Järvinen [this message]
2026-10-02 19:14 ` [PATCH v4 7/9] platform/x86: hp-bioscfg: validate SPM state returned by firmware Muhammad Bilal
2026-10-05 13:28   ` Ilpo Järvinen
2026-10-02 19:14 ` [PATCH v4 8/9] platform/x86: hp-bioscfg: NUL-terminate the SPM auth token Muhammad Bilal
2026-10-05 13:41   ` Ilpo Järvinen
2026-10-02 19:14 ` [PATCH v4 9/9] platform/x86: hp-bioscfg: fix oops on short integer attribute buffer Muhammad Bilal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=67806c30-fb5a-1871-442f-8037a06c1c9c@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=hansg@kernel.org \
    --cc=jorge.lopez2@hp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@weissschuh.net \
    --cc=meatuni001@gmail.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®