mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Michael Pratt <mcpratt@pm.me>
Cc: LKML <linux-kernel@vger.kernel.org>,
	 linux-serial <linux-serial@vger.kernel.org>,
	 Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Jiri Slaby <jirislaby@kernel.org>,
	 Wander Lairson Costa <wander@redhat.com>,
	 Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	 Vamshi Gajjela <vamshigajjela@google.com>
Subject: Re: [PATCH v2 3/3] serial: 8250: Set fifo timeout using uart_fifo_timeout()
Date: Wed, 17 Apr 2024 11:00:59 +0300 (EEST)	[thread overview]
Message-ID: <67b8f469-6634-5e58-17cf-f66f7b9a225e@linux.intel.com> (raw)
In-Reply-To: <20240416182741.22514-4-mcpratt@pm.me>

On Tue, 16 Apr 2024, Michael Pratt wrote:

> Commit 8f3631f0f6eb ("serial/8250: Use fifo in 8250 console driver")
> reworked functions for basic 8250 and 16550 type serial devices
> in order to enable and use the internal fifo device for buffering,
> however the default timeout of 10 ms remained, which is proving
> to be insufficient for low baud rates like 9600, causing data overrun.
> 
> Unforunately, that commit was written and accepted just before commit
> 31f6bd7fad3b ("serial: Store character timing information to uart_port")
> which introduced the frame_time member of the uart_port struct
> in order to store the amount of time it takes to send one uart frame
> relative to the baud rate and other serial port configuration,
> and commit f9008285bb69 ("serial: Drop timeout from uart_port")
> which established function uart_fifo_timeout() in order to
> calculate a reasonable timeout to wait until flushing
> the fifo device before writing data again when partially filled,
> using the now stored frame_time value and size of the buffer.
> 
> Fix this by using the stored timeout value made with this new function
> to calculate the timeout for the fifo device, when enabled, and when
> the buffer is larger than 1 byte (unknown port default).
> 
> The previous 2 commits add the struct members used here
> in order to store the values, so that the calculations
> are offloaded from the functions that are called
> during a write operation for better performance.
> 
> Tested on a MIPS device (ar934x) at baud rates 625, 9600, 115200.

Did you actually see some perfomance issue with 115000 bps? Or did you 
just make the "better performance" claim up?

> Fixes: 8f3631f0f6eb ("serial/8250: Use fifo in 8250 console driver")
> Signed-off-by: Michael Pratt <mcpratt@pm.me>
> ---
> V1 -> V2:
>  Use stored values instead of calling uart_fifo_timeout()
>  or checking capability flags.
>  The existence of the timeout value satisfies fifosize > 1.
> 
>  drivers/tty/serial/8250/8250_port.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index 5b0cfe6bc98c..cf67911a74f5 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -2066,7 +2066,10 @@ static void wait_for_lsr(struct uart_8250_port *up, int bits)
>  {
>  	unsigned int status, tmout = 10000;
>  
> -	/* Wait up to 10ms for the character(s) to be sent. */
> +	/* Wait for a time relative to buffer size and baud */
> +	if (up->fifo_enable && up->port.timeout)
> +		tmout = jiffies_to_usecs(up->port.timeout);
> +
>  	for (;;) {
>  		status = serial_lsr_in(up);

Hi,

Is this the only reason for adding the timeout field? I think you should 
just refactor the code such that you don't need to recalculate the timeout 
for each characted when writing n characters?

-- 
 i.


      parent reply	other threads:[~2024-04-17  8:01 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-16 18:28 [PATCH v2 0/3] serial: 8250: Set fifo timeout with uart_fifo_timeout() Michael Pratt
2024-04-16 18:29 ` [PATCH v2 1/3] serial: core: Store fifo timeout again Michael Pratt
2024-04-16 18:58   ` Andy Shevchenko
2024-04-16 19:20     ` Michael Pratt
2024-04-17  8:18       ` Ilpo Järvinen
2024-04-17 15:41       ` Wander Lairson Costa
2024-04-17  7:52   ` Ilpo Järvinen
2024-04-16 18:29 ` [PATCH v2 2/3] serial: 8250: Store whether fifo device is enabled Michael Pratt
2024-04-16 18:55   ` Andy Shevchenko
2024-04-16 19:09     ` Michael Pratt
2024-04-16 19:18       ` Andy Shevchenko
2024-04-16 19:40         ` Michael Pratt
2024-04-16 18:34 ` [PATCH v2 3/3] serial: 8250: Set fifo timeout using uart_fifo_timeout() Michael Pratt
2024-04-16 18:57   ` Andy Shevchenko
2024-04-16 19:15     ` Michael Pratt
2024-04-17  8:13       ` Ilpo Järvinen
2024-04-17  8:00   ` Ilpo Järvinen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=67b8f469-6634-5e58-17cf-f66f7b9a225e@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jirislaby@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mcpratt@pm.me \
    --cc=vamshigajjela@google.com \
    --cc=wander@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®