mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Bryan O'Sullivan" <bos@pathscale.com>
To: rdreier@cisco.com
Cc: openib-general@openfabrics.org, linux-kernel@vger.kernel.org
Subject: [PATCH 21 of 33] IB/ipath - force PIOAvail update entry point
Date: Thu, 15 Mar 2007 14:45:05 -0700	[thread overview]
Message-ID: <68302e9dbd8803f937af.1173995105@iqa-25.internal.keyresearch.com> (raw)
In-Reply-To: <patchbomb.1173995084@iqa-25.internal.keyresearch.com>

# HG changeset patch
# User Arthur Jones <arthur.jones@qlogic.com>
# Date 1173994465 25200
# Node ID 68302e9dbd8803f937af9f02ca26a63ff43e9afa
# Parent  8a013b707785accfd71589334bbf8e4029ffa892
IB/ipath - force PIOAvail update entry point.

Due to a chip bug, the PIOAvail register is not always updated to memory.
This patch allows userspace to force an update.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>

diff -r 8a013b707785 -r 68302e9dbd88 drivers/infiniband/hw/ipath/ipath_common.h
--- a/drivers/infiniband/hw/ipath/ipath_common.h	Thu Mar 15 14:34:25 2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_common.h	Thu Mar 15 14:34:25 2007 -0700
@@ -352,7 +352,7 @@ struct ipath_base_info {
  * may not be implemented; the user code must deal with this if it
  * cares, or it must abort after initialization reports the difference.
  */
-#define IPATH_USER_SWMINOR 4
+#define IPATH_USER_SWMINOR 5
 
 #define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR)
 
@@ -429,8 +429,11 @@ struct ipath_user_info {
 #define __IPATH_CMD_SLAVE_INFO	22	/* return info on slave processes (for old user code) */
 #define IPATH_CMD_ASSIGN_PORT	23	/* allocate HCA and port */
 #define IPATH_CMD_USER_INIT 	24	/* set up userspace */
-
-#define IPATH_CMD_MAX		24
+#define IPATH_CMD_UNUSED_1	25
+#define IPATH_CMD_UNUSED_2	26
+#define IPATH_CMD_PIOAVAILUPD	27	/* force an update of PIOAvail reg */
+
+#define IPATH_CMD_MAX		27
 
 struct ipath_port_info {
 	__u32 num_active;	/* number of active units */
diff -r 8a013b707785 -r 68302e9dbd88 drivers/infiniband/hw/ipath/ipath_file_ops.c
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c	Thu Mar 15 14:34:25 2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c	Thu Mar 15 14:34:25 2007 -0700
@@ -2047,6 +2047,17 @@ static int ipath_get_slave_info(struct i
 	return ret;
 }
 
+static int ipath_force_pio_avail_update(struct ipath_devdata *dd)
+{
+	u64 reg = dd->ipath_sendctrl;
+
+	clear_bit(IPATH_S_PIOBUFAVAILUPD, &reg);
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, reg);
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+
+	return 0;
+}
+
 static ssize_t ipath_write(struct file *fp, const char __user *data,
 			   size_t count, loff_t *off)
 {
@@ -2106,22 +2117,30 @@ static ssize_t ipath_write(struct file *
 		dest = &cmd.cmd.slave_mask_addr;
 		src = &ucmd->cmd.slave_mask_addr;
 		break;
+	case IPATH_CMD_PIOAVAILUPD:	// force an update of PIOAvail reg
+		copy = 0;
+		src = NULL;
+		dest = NULL;
+		break;
 	default:
 		ret = -EINVAL;
 		goto bail;
 	}
 
-	if ((count - consumed) < copy) {
-		ret = -EINVAL;
-		goto bail;
-	}
-
-	if (copy_from_user(dest, src, copy)) {
-		ret = -EFAULT;
-		goto bail;
-	}
-
-	consumed += copy;
+	if (copy) {
+		if ((count - consumed) < copy) {
+			ret = -EINVAL;
+			goto bail;
+		}
+
+		if (copy_from_user(dest, src, copy)) {
+			ret = -EFAULT;
+			goto bail;
+		}
+
+		consumed += copy;
+	}
+
 	pd = port_fp(fp);
 	if (!pd && cmd.type != __IPATH_CMD_USER_INIT &&
 		cmd.type != IPATH_CMD_ASSIGN_PORT) {
@@ -2172,6 +2191,9 @@ static ssize_t ipath_write(struct file *
 					   (void __user *) (unsigned long)
 					   cmd.cmd.slave_mask_addr);
 		break;
+	case IPATH_CMD_PIOAVAILUPD:
+		ret = ipath_force_pio_avail_update(pd->port_dd);
+		break;
 	}
 
 	if (ret >= 0)

  parent reply	other threads:[~2007-03-15 22:24 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-03-15 21:44 [PATCH 00 of 33] Set of ipath patches for 2.6.22 Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 01 of 33] IB/ipath - add ability to set and clear IB local loopback Bryan O'Sullivan
2007-03-19 21:22   ` Roland Dreier
2007-03-21 18:50     ` Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 02 of 33] IB/ipath - fix user memory region creation when IOMMU present Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 03 of 33] IB/ipath - definitions of two of RXE parity error bits were reversed Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 04 of 33] IB/ipath - don't initialize port memory for subports Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 05 of 33] IB/ipath - fix case where SRQ limit event causes CQ entry to be dropped Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 06 of 33] IB/ipath - NMI cpu lockup if local loopback used Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 07 of 33] IB/ipath - support larger IB_QP_MAX_DEST_RD_ATOMIC and IB_QP_MAX_QP_RD_ATOMIC Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 08 of 33] IB/ipath - fix up some debug messages Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 09 of 33] IB/ipath - fix QP error completion queue entries Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 10 of 33] IB/ipath - fix PSN update for RC retries Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 11 of 33] IB/ipath - Change packet problems vs chip errors handling and reporting Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 12 of 33] IB/ipath - fix bad argument to clear_bit that trashed memory and/or crashed Bryan O'Sullivan
2007-03-19 21:24   ` Roland Dreier
2007-03-15 21:44 ` [PATCH 13 of 33] IB/ipath - Fix CQ flushing when QP is modified to error state Bryan O'Sullivan
2007-03-15 21:44 ` [PATCH 14 of 33] IB/ipath - fix port sharing on powerpc Bryan O'Sullivan
2007-03-19 21:27   ` Roland Dreier
2007-04-10 22:32   ` Roland Dreier
2007-03-15 21:44 ` [PATCH 15 of 33] IB/ipath - allow receive ports mapped into userspace to be shared Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 16 of 33] IB/ipath - fix RDMA reads of length zero and error handling Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 17 of 33] IB/ipath - remove unused register read routine ipath_read_kreg64_port() Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 18 of 33] IB/ipath - Fix calculation for number of kernel PIO buffers Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 19 of 33] IB/ipath - Discard multicast packets without a GRH Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 20 of 33] IB/ipath - call free_irq on chip specific initialization failure Bryan O'Sullivan
2007-03-15 21:45 ` Bryan O'Sullivan [this message]
2007-03-15 21:45 ` [PATCH 22 of 33] IB/ipath - print better error messages if kernel is misconfigured Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 23 of 33] IB/ipath - Improve handling and reporting of parity errors, mostly cleanup Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 24 of 33] IB/ipath - fix driver crash (in interrupt or during unload) after chip reset Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 25 of 33] IB/ipath - On unrecoverable errors, force link dow, LEDs off Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 26 of 33] IB/ipath - prevent random program use of diags interface Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 27 of 33] IB/ipath - cleaner shutdown at driver unload, disable IB link earlier Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 28 of 33] IB/ipath - Don't allow QP's 0 and 1 to be opened multiple times Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 29 of 33] IB/ipath - fix unit selection due to all cpu affinity bits set Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 30 of 33] IB/ipath - check reserved keys Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 31 of 33] IB/ipath - remove duplicate stuff from ipath_verbs.h Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 32 of 33] IB/ipath - check that a UD work request's address handle is valid Bryan O'Sullivan
2007-03-15 21:45 ` [PATCH 33 of 33] IB/ipath - fix drift between WCs in user and kernel space Bryan O'Sullivan
2007-03-19 21:23   ` Roland Dreier
2007-03-19 21:17 ` [PATCH 00 of 33] Set of ipath patches for 2.6.22 Roland Dreier
2007-04-10 22:30 ` Roland Dreier
2007-04-11  0:35   ` [ofa-general] " Roland Dreier
2007-04-11  0:48     ` Robert Walsh
2007-04-11 22:24   ` Robert Walsh
2007-04-11 22:33     ` Roland Dreier
2007-04-11 22:47       ` Robert Walsh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=68302e9dbd8803f937af.1173995105@iqa-25.internal.keyresearch.com \
    --to=bos@pathscale.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=openib-general@openfabrics.org \
    --cc=rdreier@cisco.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®