From: "Martin J. Bligh" <mbligh@aracnet.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: [Bug 393] New: IDE-SCSI : bad: scheduling while atomic
Date: Sun, 23 Feb 2003 07:36:55 -0800 [thread overview]
Message-ID: <6860000.1046014615@[10.10.2.4]> (raw)
http://bugme.osdl.org/show_bug.cgi?id=393
Summary: IDE-SCSI : bad: scheduling while atomic
Kernel Version: 2.5.62
Status: NEW
Severity: normal
Owner: alan@lxorguk.ukuu.org.uk
Submitter: rol@as2917.net
CC: rol@as2917.net
Distribution:
RedHat 8.0
Hardware Environment:
P4S8X MB
P-IV
2 IDE HD
1 IDE CD-ROM
1 IDE DVD
1 SCSI HD
Software Environment:
Kernel 2.5.62
Lilo contains :
image=/boot/vmlinuz-2.5.62-smp-acpi
label=test
append="panic=30 hdd=ide-scsi console=ttyS0 console=tty1"
read-only
Problem Description:
While booting :
...
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS648 ATA 133 controller
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800BB-00CAA1, ATA DISK drive
hdb: IC35L040AVER07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: MATSHITADVD-ROM SR-8584A, ATAPI CD/DVD-ROM drive
hdd: TDK CDRW4800B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hda4
hdb: host protected area => 1
hdb: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(100)
hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 >
hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
end_request: I/O error, dev hdc, sector 0
ide-floppy driver 0.99.newide
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Vendor: FUJITSU Model: MAN3367MP Rev: 5507
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 64
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TDK Model: CDRW4800B Rev: S7S3
Type: CD-ROM ANSI SCSI revision: 02
ide-scsi: abort called for 21
bad: scheduling while atomic!
Call Trace:
[<c011e242>] schedule+0x34e/0x354
[<c02bf623>] poke_blanked_console+0x53/0x6e
[<c0109c2e>] __down+0xa4/0x11a
[<c011e298>] default_wake_function+0x0/0x12
[<c0123010>] __call_console_drivers+0x58/0x5a
[<c0109e80>] __down_failed+0x8/0xc
[<c031ddbd>] .text.lock.scsi_error+0x8e/0xa9
[<c031d46e>] scsi_sleep_done+0x0/0x12
[<c034a7c2>] idescsi_abort+0x116/0x120
[<c034a6ac>] idescsi_abort+0x0/0x120
[<c031ce89>] scsi_try_to_abort_cmd+0x83/0xaa
[<c031cfb5>] scsi_eh_abort_cmd+0x33/0x64
[<c031cf82>] scsi_eh_abort_cmd+0x0/0x64
[<c031d897>] scsi_unjam_host+0xa1/0xea
[<c0109e8b>] __down_failed_interruptible+0x7/0xc
[<c031d9bb>] scsi_error_handler+0xdb/0x11c
[<c031d8e0>] scsi_error_handler+0x0/0x11c
[<c0108c65>] kernel_thread_helper+0x5/0xc
bad: scheduling while atomic!
Call Trace:
[<c011e242>] schedule+0x34e/0x354
[<c0109c2e>] __down+0xa4/0x11a
[<c011e298>] default_wake_function+0x0/0x12
[<c012a51a>] add_timer+0x7a/0xb8
[<c0109e80>] __down_failed+0x8/0xc
[<c031ddbd>] .text.lock.scsi_error+0x8e/0xa9
[<c031d46e>] scsi_sleep_done+0x0/0x12
[<c034a7c2>] idescsi_abort+0x116/0x120
[<c034a6ac>] idescsi_abort+0x0/0x120
[<c031ce89>] scsi_try_to_abort_cmd+0x83/0xaa
[<c031cfb5>] scsi_eh_abort_cmd+0x33/0x64
[<c031cf82>] scsi_eh_abort_cmd+0x0/0x64
[<c031d897>] scsi_unjam_host+0xa1/0xea
[<c0109e8b>] __down_failed_interruptible+0x7/0xc
[<c031d9bb>] scsi_error_handler+0xdb/0x11c
[<c031d8e0>] scsi_error_handler+0x0/0x11c
[<c0108c65>] kernel_thread_helper+0x5/0xc
bad: scheduling while atomic!
Call Trace:
[<c011e242>] schedule+0x34e/0x354
[<c0109c2e>] __down+0xa4/0x11a
[<c011e298>] default_wake_function+0x0/0x12
[<c012a51a>] add_timer+0x7a/0xb8
[<c0109e80>] __down_failed+0x8/0xc
[<c031ddbd>] .text.lock.scsi_error+0x8e/0xa9
[<c031d46e>] scsi_sleep_done+0x0/0x12
[<c034a7c2>] idescsi_abort+0x116/0x120
[<c034a6ac>] idescsi_abort+0x0/0x120
[<c031ce89>] scsi_try_to_abort_cmd+0x83/0xaa
[<c031cfb5>] scsi_eh_abort_cmd+0x33/0x64
[<c031cf82>] scsi_eh_abort_cmd+0x0/0x64
[<c031d897>] scsi_unjam_host+0xa1/0xea
[<c0109e8b>] __down_failed_interruptible+0x7/0xc
[<c031d9bb>] scsi_error_handler+0xdb/0x11c
[<c031d8e0>] scsi_error_handler+0x0/0x11c
[<c0108c65>] kernel_thread_helper+0x5/0xc
bad: scheduling while atomic!
Call Trace:
[<c011e242>] schedule+0x34e/0x354
[<c0109c2e>] __down+0xa4/0x11a
[<c011e298>] default_wake_function+0x0/0x12
[<c012a51a>] add_timer+0x7a/0xb8
[<c0109e80>] __down_failed+0x8/0xc
[<c031ddbd>] .text.lock.scsi_error+0x8e/0xa9
[<c031d46e>] scsi_sleep_done+0x
Steps to reproduce:
reply other threads:[~2003-02-23 15:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='6860000.1046014615@[10.10.2.4]' \
--to=mbligh@aracnet.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®