From: Zhang Yi <yi.zhang@huaweicloud.com>
To: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: Baokun Li <libaokun1@huawei.com>,
linux-ext4@vger.kernel.org, Jan Kara <jack@suse.cz>,
Ritesh Harjani <ritesh.list@gmail.com>,
linux-kernel@vger.kernel.org, Yang Erkun <yangerkun@huawei.com>,
Theodore Ts'o <tytso@mit.edu>
Subject: Re: [PATCH] ext4: cache es->s_journal_inum in ext4_sb_info
Date: Wed, 26 Mar 2025 16:33:31 +0800 [thread overview]
Message-ID: <68b490b1-2c48-46e4-aa8a-a74f3547e063@huaweicloud.com> (raw)
In-Reply-To: <Z-OhNOVEcQNkYc18@li-dc0c254c-257c-11b2-a85c-98b6c1322444.ibm.com>
On 2025/3/26 14:39, Ojaswin Mujoo wrote:
> On Wed, Mar 26, 2025 at 12:01:45PM +0800, Zhang Yi wrote:
>> On 2025/3/26 10:16, Baokun Li wrote:
>>> On 2025/3/26 1:57, Ojaswin Mujoo wrote:
>>>> On Tue, Mar 18, 2025 at 10:31:29PM -0400, Theodore Ts'o wrote:
>>>>> On Tue, Mar 18, 2025 at 01:42:31PM +0530, Ojaswin Mujoo wrote:
>>>>>>> So this is something we need to do if the journal is actived, and if
>>>>>>> it's active, then sbi->s_journal will be non-NULL, and so we can just
>>>>>>> check to see if inode == sbi->s_journal instead. This will simplify
>>>>>> I believe you mean inode == sbi->s_journal->j_inode here right?
>>>>> Yes, that's what I meant; sorry for the not catching this before I
>>>>> sent my reply.
>>>>>
>>>>> Cheers,
>>>>>
>>>>> - Ted
>>>> Hi Ted, Baokun,
>>>>
>>>> I got some time to revisit this. Seems like checking against
>>>> s_journal->j_inode is not enough. This is because both
>>>> ext4_check_blockref() and check_block_validity() can be called even
>>>> before journal->j_inode is set:
>>>>
>>>> ext4_open_inode_journal
>>>> ext4_get_journal_inode
>>>> __ext4_iget
>>>> ext4_ind_check_inode
>>>> ext4_check_blockref /* j_inode not set */
>>>>
>>>> journal = jbd2_journal_init_inode
>>>> bmap
>>>> ext4_bmap
>>>> iomap_bmap
>>>> ext4_iomap_begin
>>>> ext4_map_blocks
>>>> check_block_validity
>>>>
>>>> journal->j_inode = inode
>>>>
>>>>
>>>> Now, I think in this case the best solution might be to use the extra
>>>> field like we do in this patch but set EXT4_SB(sb)->s_journal_ino
>>>> sufficiently early.
>>>>
>>>> Thoughts?
>>>
>>> Because system zone setup happens after the journal are loaded, I think we
>>> can skip the check if the journal haven't been loaded yet, like this:
>>>
>>> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
>>> index d04d8a7f12e7..38dc72ff7e78 100644
>>> --- a/fs/ext4/inode.c
>>> +++ b/fs/ext4/inode.c
>>> @@ -383,9 +383,10 @@ static int __check_block_validity(struct inode *inode, const char *func,
>>> unsigned int line,
>>> struct ext4_map_blocks *map)
>>> {
>>> + journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
>>> +
>>> if (ext4_has_feature_journal(inode->i_sb) &&
>>> - (inode->i_ino ==
>>> - le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum)))
>>> + (!journal || inode == journal->j_inode))
>>> return 0;
>>> if (!ext4_inode_block_valid(inode, map->m_pblk, map->m_len)) {
>>> ext4_error_inode(inode, func, line, map->m_pblk,
>>>
>>> If any part of the journal area overlaps with the system zone, we'll catch
>>> it when we add the journal area to the system zone later.
>>>
>>>
>>
>> Since the creation of the system zone relies on the journal being
>> loaded, I think there is no risk in proceeding to call
>> ext4_inode_block_valid() to perform a basic block range check for
>> the journal inode, or even better.
>>
>> Thanks,
>> Yi.
>
> Got it Yi, makes sense to me. So I believe you are suggesting something
> like:
>
> @@ -384,9 +384,10 @@ static int __check_block_validity(struct inode *inode, const char *func,
> unsigned int line,
> struct ext4_map_blocks *map)
> {
> + journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
> +
> if (ext4_has_feature_journal(inode->i_sb) &&
We are going to check ->s_journal, so I suppose we could drop this
feature check as well. Others looks good to me.
> - (inode->i_ino ==
> - le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum)))
> + (journal && journal->j_inode == inode))
> return 0;
> if (!ext4_inode_block_valid(inode, map->m_pblk, map->m_len)) {
> ext4_error_inode(inode, func, line, map->m_pblk,
>
>>
>
> So that even if it is a journal inode we can go ahead and perform some basic checks
> as the system zone rbtree will anyways be NULL at this point. From a cursory look,
> it seems that __ext4_iget(..., journal_inode) -> ext4_ext_check_inode() already relies
> on the fact that system zone is NULL, so we should be okay here as well.
Yeah, that's right. :)
Cheers,
Yi.
>
> If this looks good, I'll send a v2 with the suggested changes.
>
> Thanks,
> ojaswin
next prev parent reply other threads:[~2025-03-26 8:33 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-14 11:41 Ojaswin Mujoo
2025-03-15 7:19 ` Zhang Yi
2025-03-16 1:41 ` Theodore Ts'o
2025-03-17 3:54 ` Baokun Li
2025-03-18 8:12 ` Ojaswin Mujoo
2025-03-19 2:31 ` Theodore Ts'o
2025-03-25 17:57 ` Ojaswin Mujoo
2025-03-26 2:16 ` Baokun Li
2025-03-26 4:01 ` Zhang Yi
2025-03-26 6:39 ` Ojaswin Mujoo
2025-03-26 8:33 ` Zhang Yi [this message]
2025-03-26 9:26 ` Baokun Li
2025-03-27 6:20 ` Ojaswin Mujoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=68b490b1-2c48-46e4-aa8a-a74f3547e063@huaweicloud.com \
--to=yi.zhang@huaweicloud.com \
--cc=jack@suse.cz \
--cc=libaokun1@huawei.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ojaswin@linux.ibm.com \
--cc=ritesh.list@gmail.com \
--cc=tytso@mit.edu \
--cc=yangerkun@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®