[PATCH v3 4/5] thermal: khadas_mcu_fan: add support for Khadas Edge 2

[muhammed.efecetin.67@gmail.com]

From: Muhammed Efe Cetin <efectn@protonmail.com>

Fan control on the Khadas Edge 2 is controlled with the 0x8A register,
using percentage values from 0 to 100, whereas there are only 3 constant
steps in previous Khadas boards. Therefore, i adjusted max_level and
fan_ctrl_reg when the mcu node is defined with khadas,mcu-edge2 compatible.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 drivers/thermal/khadas_mcu_fan.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/khadas_mcu_fan.c b/drivers/thermal/khadas_mcu_fan.c
index d35e5313bea41..e3ac4fb6d1f82 100644
--- a/drivers/thermal/khadas_mcu_fan.c
+++ b/drivers/thermal/khadas_mcu_fan.c
@@ -15,10 +15,13 @@
 #include <linux/thermal.h>
 
 #define MAX_LEVEL 3
+#define MAX_LEVEL_EDGE2 100
 
 struct khadas_mcu_fan_ctx {
 	struct khadas_mcu *mcu;
 	unsigned int level;
+	unsigned int max_level;
+	unsigned int fan_ctrl_reg;
 	struct thermal_cooling_device *cdev;
 };
 
@@ -26,8 +29,7 @@ static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx,
 				    unsigned int level)
 {
 	int ret;
-
-	ret = regmap_write(ctx->mcu->regmap, KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
+	ret = regmap_write(ctx->mcu->regmap, ctx->fan_ctrl_reg,
 			   level);
 	if (ret)
 		return ret;
@@ -40,7 +42,9 @@ static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx,
 static int khadas_mcu_fan_get_max_state(struct thermal_cooling_device *cdev,
 					unsigned long *state)
 {
-	*state = MAX_LEVEL;
+	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
+
+	*state = ctx->max_level;
 
 	return 0;
 }
@@ -61,7 +65,7 @@ khadas_mcu_fan_set_cur_state(struct thermal_cooling_device *cdev,
 {
 	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
 
-	if (state > MAX_LEVEL)
+	if (state > ctx->max_level)
 		return -EINVAL;
 
 	if (state == ctx->level)
@@ -88,6 +92,14 @@ static int khadas_mcu_fan_probe(struct platform_device *pdev)
 	if (!ctx)
 		return -ENOMEM;
 	ctx->mcu = mcu;
+	ctx->max_level = MAX_LEVEL;
+	ctx->fan_ctrl_reg = KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG;
+
+	if (of_device_is_compatible(mcu->dev->of_node, "khadas,mcu-edge2")) {
+		ctx->fan_ctrl_reg = KHADAS_MCU_EDGE2_FAN_CTRL_REG;
+		ctx->max_level = MAX_LEVEL_EDGE2;
+	}
+
 	platform_set_drvdata(pdev, ctx);
 
 	cdev = devm_thermal_of_cooling_device_register(dev->parent,
-- 
2.51.1.dirty