Re: [PATCH v2 0/3] arm64: dts: ti: Introduce AM62P5 SoC and board

[Andrew Davis <afd@ti.com>]

On 8/14/23 2:26 PM, Krzysztof Kozlowski wrote:
> On 12/08/2023 00:49, Nishanth Menon wrote:
>> Hi Vignesh Raghavendra,
>>
>> On Sat, 12 Aug 2023 00:14:29 +0530, Vignesh Raghavendra wrote:
>>> This series adds basic support for AM62P family of SoCs and specifically
>>> AM62P5 variant. Also adds AM62P5-SK support with basic peripheral
>>> like UART.
>>>
>>> TRM at [0] and Schematics is at [1]
>>>
>>> [0]: https://www.ti.com/lit/pdf/spruj83
>>> [1]: https://www.ti.com/lit/zip/sprr487
>>>
>>> [...]
>>
>> Note: since the changes were trivial, I incorporated the cosmetic
>> fixup suggested by Andrew locally when I applied. I have also dropped
>> bootph property from board's reserved nodes inline with what we did
>> for j721s2[2]. Thanks for the bootlog.
>>
>> I have applied the following to branch ti-k3-dts-next on [1].
>> Thank you!
>>
>> [1/3] dt-bindings: arm: ti: Add bindings for AM62P5 SoCs
>>        commit: b57fc5cbdbdfd04d44697800a9d59aeb3be2f273
>> [2/3] arm64: dts: ti: Introduce AM62P5 family of SoCs
>>        commit: 29075cc09f43a024d962da66d2e4f9eb577713d0
>> [3/3] arm64: dts: ti: Add support for the AM62P5 Starter Kit
>>        commit: 935c4047d42e53a06ec768ddc495a44f6869209c
>>
> 
> A bit too fast. simple-mfd *is not allowed* on its own.
> 
We have the rule against ['syscon', 'simple-mfd'], which requires a 3rd
specific compatible, but it seems 'simple-mfd' is allowed in the same way
as "simple-bus" (not sure how or why, I would expect a `failed to match any
schema with compatible`, but I'm not getting that either?).

We can add something like simple-mfd.yaml for this to explicitly check that
the compatible has minItems: 2.

But in this case these seem to be just a typo and we meant "simple-bus" here,
then it got copy/pasted over our k3 tree.

So as Nishanth suggested, we can clean this up first thing next cycle, then
add a rule to prevent it from happening for anyone else again while we are at it.

Andrew

> Best regards,
> Krzysztof
>