From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
To: Chen-Yu Tsai <wenst@chromium.org>,
Marcel Holtmann <marcel@holtmann.org>,
Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>,
linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Date: Fri, 26 Jan 2024 10:13:40 +0100 [thread overview]
Message-ID: <69af3310-3e6f-4730-bebc-44d5e29498b6@collabora.com> (raw)
In-Reply-To: <20240126063500.2684087-2-wenst@chromium.org>
Il 26/01/24 07:34, Chen-Yu Tsai ha scritto:
> The MediaTek MT7921S is a WiFi/Bluetooth combo chip that works over
> SDIO. While the Bluetooth function is fully discoverable, the chip
> has a pin that can reset just the Bluetooth side, as opposed to the
> full chip. This needs to be described in the device tree.
>
> Add a device tree binding for MT7921S Bluetooth over SDIO specifically
> ot document the reset line.
>
> Cc: Sean Wang <sean.wang@mediatek.com>
> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
> Changes since v1:
> - Reworded descriptions
> - Moved binding maintainer section before description
> - Added missing reference to bluetooth-controller.yaml
> - Added missing GPIO header to example
>
> .../bluetooth/mediatek,mt7921s-bluetooth.yaml | 53 +++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 54 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
> new file mode 100644
> index 000000000000..ff11c95c816c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7921s-bluetooth.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek MT7921S Bluetooth
> +
> +maintainers:
> + - Sean Wang <sean.wang@mediatek.com>
> +
> +description:
> + MT7921S is an SDIO-attached dual-radio WiFi+Bluetooth Combo chip; each
> + function is its own SDIO function on a shared SDIO interface. The chip
> + has two dedicated reset lines, one for each function core.
> + This binding only covers the Bluetooth part of the chip.
> +
> +allOf:
> + - $ref: bluetooth-controller.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - mediatek,mt7921s-bluetooth
> + reg:
> + const: 2
> +
> + reset-gpios:
> + maxItems: 1
> + description:
> + An active-low reset line for the Bluetooth core; on typical M.2
> + key E modules this is the W_DISABLE2# pin.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + mmc {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bluetooth@2 {
> + compatible = "mediatek,mt7921s-bluetooth";
> + reg = <2>;
> + reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b64a64ca7916..662957146852 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13657,6 +13657,7 @@ M: Sean Wang <sean.wang@mediatek.com>
> L: linux-bluetooth@vger.kernel.org
> L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
> S: Maintained
> +F: Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
> F: Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
> F: drivers/bluetooth/btmtkuart.c
>
next prev parent reply other threads:[~2024-01-26 9:13 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-26 6:34 [PATCH v2 0/2] bluetooth: mt7921s: Add binding and fixup existing dts Chen-Yu Tsai
2024-01-26 6:34 ` [PATCH v2 1/2] dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Chen-Yu Tsai
2024-01-26 9:13 ` AngeloGioacchino Del Regno [this message]
2024-01-26 10:40 ` Krzysztof Kozlowski
2024-01-29 3:38 ` Chen-Yu Tsai
2024-01-29 7:34 ` Krzysztof Kozlowski
2024-01-30 3:32 ` Chen-Yu Tsai
2024-01-30 7:37 ` Krzysztof Kozlowski
2024-01-30 7:47 ` Chen-Yu Tsai
2024-01-30 16:25 ` Krzysztof Kozlowski
2024-01-30 22:38 ` Rob Herring
2024-01-31 3:39 ` Chen-Yu Tsai
2024-02-05 17:49 ` Ulf Hansson
2024-02-20 8:19 ` Chen-Yu Tsai
2024-01-26 6:34 ` [PATCH v2 2/2] arm64: dts: mediatek: mt8183-pico6: Fix bluetooth node Chen-Yu Tsai
2024-01-29 15:51 ` Matthias Brugger
2024-01-29 16:31 ` Paul Menzel
2024-01-29 16:36 ` AngeloGioacchino Del Regno
2024-01-30 3:21 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=69af3310-3e6f-4730-bebc-44d5e29498b6@collabora.com \
--to=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=wenst@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®