From: Suman Anna <s-anna@ti.com>
To: Drew Fustini <dfustini@baylibre.com>,
Tony Lindgren <tony@atomide.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Keerthy <j-keerthy@ti.com>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Tero Kristo <kristo@kernel.org>, <khilman@baylibre.com>
Subject: Re: [PATCH] clocksource/drivers/timer-ti-dm: fix regression from errata i940 fix
Date: Wed, 2 Feb 2022 15:33:45 -0600 [thread overview]
Message-ID: <69b94cab-43fb-23a7-5819-66a37205bd23@ti.com> (raw)
In-Reply-To: <20220202212554.1316032-1-dfustini@baylibre.com>
On 2/2/22 15:25, Drew Fustini wrote:
> The existing fix for errata i940 causes a conflict for IPU2 which is
> using timer 3 and 4. From arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi:
>
> &ipu2 {
> mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
> ti,timers = <&timer3>;
> ti,watchdog-timers = <&timer4>, <&timer9>;
> };
>
> I discovered the timer conflict from when booting mainline on a
> BeagleBoard X15 (AM5728):
>
> remoteproc remoteproc1: 55020000.ipu is available
> remoteproc remoteproc1: powering up 55020000.ipu
> remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4
> omap-rproc 55020000.ipu: could not get timer platform device
> omap-rproc 55020000.ipu: omap_rproc_enable_timers failed: -19
> remoteproc remoteproc1: can't start rproc 55020000.ipu: -19
>
> I modified the errata fix to use timer 15 and 16 instead which resolves
> the timer conflict.
>
> Fixes: 25de4ce5ed02 ("clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940")
> Link: https://lore.kernel.org/linux-omap/YfWsG0p6to3IJuvE@x1/
Suggested-by: Suman Anna <s-anna@ti.com>
regards
Suman
> Signed-off-by: Drew Fustini <dfustini@baylibre.com>
> ---
> Note: I am keeping the device tree and driver change together in one
> patch as that is how the original errata fix commit was structured.
>
> arch/arm/boot/dts/dra7-l4.dtsi | 5 ++---
> arch/arm/boot/dts/dra7.dtsi | 8 ++++----
> drivers/clocksource/timer-ti-dm-systimer.c | 4 ++--
> 3 files changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
> index 956a26d52a4c..0a11bacffc1f 100644
> --- a/arch/arm/boot/dts/dra7-l4.dtsi
> +++ b/arch/arm/boot/dts/dra7-l4.dtsi
> @@ -3482,8 +3482,7 @@ timer14: timer@0 {
> ti,timer-pwm;
> };
> };
> -
> - target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
> + timer15_target: target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
> compatible = "ti,sysc-omap4-timer", "ti,sysc";
> reg = <0x2c000 0x4>,
> <0x2c010 0x4>;
> @@ -3511,7 +3510,7 @@ timer15: timer@0 {
> };
> };
>
> - target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
> + timer16_target: target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
> compatible = "ti,sysc-omap4-timer", "ti,sysc";
> reg = <0x2e000 0x4>,
> <0x2e010 0x4>;
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 6b485cbed8d5..8f7ffe2f66e9 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -1339,20 +1339,20 @@ timer@0 {
> };
>
> /* Local timers, see ARM architected timer wrap erratum i940 */
> -&timer3_target {
> +&timer15_target {
> ti,no-reset-on-init;
> ti,no-idle;
> timer@0 {
> - assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
> + assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
> assigned-clock-parents = <&timer_sys_clk_div>;
> };
> };
>
> -&timer4_target {
> +&timer16_target {
> ti,no-reset-on-init;
> ti,no-idle;
> timer@0 {
> - assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
> + assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
> assigned-clock-parents = <&timer_sys_clk_div>;
> };
> };
> diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
> index b6f97960d8ee..c706d63e9f5c 100644
> --- a/drivers/clocksource/timer-ti-dm-systimer.c
> +++ b/drivers/clocksource/timer-ti-dm-systimer.c
> @@ -695,9 +695,9 @@ static int __init dmtimer_percpu_quirk_init(struct device_node *np, u32 pa)
> return 0;
> }
>
> - if (pa == 0x48034000) /* dra7 dmtimer3 */
> + if (pa == 0x4882C000) /* dra7 dmtimer15 */
> return dmtimer_percpu_timer_init(np, 0);
> - else if (pa == 0x48036000) /* dra7 dmtimer4 */
> + else if (pa == 0x4882E000) /* dra7 dmtimer16 */
> return dmtimer_percpu_timer_init(np, 1);
>
> return 0;
next prev parent reply other threads:[~2022-02-02 21:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-02 21:25 Drew Fustini
2022-02-02 21:33 ` Suman Anna [this message]
2022-02-02 21:36 ` Drew Fustini
2022-02-03 6:53 ` Tony Lindgren
2022-02-03 15:56 ` Suman Anna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=69b94cab-43fb-23a7-5819-66a37205bd23@ti.com \
--to=s-anna@ti.com \
--cc=daniel.lezcano@linaro.org \
--cc=dfustini@baylibre.com \
--cc=j-keerthy@ti.com \
--cc=khilman@baylibre.com \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®