From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <robh+dt@kernel.org>,
<krzysztof.kozlowski@linaro.org>,
<krzysztof.kozlowski+dt@linaro.org>, <linux@armlinux.org.uk>,
<vladimir.oltean@nxp.com>, <vigneshr@ti.com>, <nsekhar@ti.com>,
<netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <srk@ti.com>,
<s-vadapalli@ti.com>
Subject: Re: [PATCH net-next v6 3/3] net: ethernet: ti: am65-cpsw: Add support for SERDES configuration
Date: Wed, 18 Jan 2023 11:17:33 +0530 [thread overview]
Message-ID: <69d39885-68df-7c94-5a98-5f1e174c7316@ti.com> (raw)
In-Reply-To: <CAMuHMdWiXu9OJxH4mRnneC3jhqTEcYXek3kbr7svhJ3cnPPwcw@mail.gmail.com>
Hello Geert,
Thank you for reviewing the patch.
On 17/01/23 19:25, Geert Uytterhoeven wrote:
> Hi Siddharth,
>
> On Wed, Jan 4, 2023 at 11:37 AM Siddharth Vadapalli <s-vadapalli@ti.com> wrote:
>> Use PHY framework APIs to initialize the SERDES PHY connected to CPSW MAC.
>>
>> Define the functions am65_cpsw_disable_phy(), am65_cpsw_enable_phy(),
>> am65_cpsw_disable_serdes_phy() and am65_cpsw_enable_serdes_phy().
>>
>> Add new member "serdes_phy" to struct "am65_cpsw_slave_data" to store the
>> SERDES PHY for each port, if it exists. Use it later while disabling the
>> SERDES PHY for each port.
>>
>> Power on and initialize the SerDes PHY in am65_cpsw_nuss_init_slave_ports()
>> by invoking am65_cpsw_enable_serdes_phy().
>>
>> Power off the SerDes PHY in am65_cpsw_nuss_remove() by invoking
>> am65_cpsw_disable_serdes_phy().
>>
>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
>
> Thanks for your patch, which is now commit dab2b265dd23ef8f ("net:
> ethernet: ti: am65-cpsw: Add support for SERDES configuration")
> in net-next.
>
>> --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
>> +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
>> @@ -1416,6 +1416,68 @@ static const struct net_device_ops am65_cpsw_nuss_netdev_ops = {
>> .ndo_setup_tc = am65_cpsw_qos_ndo_setup_tc,
>> };
>>
>> +static void am65_cpsw_disable_phy(struct phy *phy)
>> +{
>> + phy_power_off(phy);
>> + phy_exit(phy);
>> +}
>> +
>> +static int am65_cpsw_enable_phy(struct phy *phy)
>> +{
>> + int ret;
>> +
>> + ret = phy_init(phy);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = phy_power_on(phy);
>> + if (ret < 0) {
>> + phy_exit(phy);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void am65_cpsw_disable_serdes_phy(struct am65_cpsw_common *common)
>> +{
>> + struct am65_cpsw_port *port;
>> + struct phy *phy;
>> + int i;
>> +
>> + for (i = 0; i < common->port_num; i++) {
>> + port = &common->ports[i];
>> + phy = port->slave.serdes_phy;
>> + if (phy)
>> + am65_cpsw_disable_phy(phy);
>> + }
>> +}
>> +
>> +static int am65_cpsw_init_serdes_phy(struct device *dev, struct device_node *port_np,
>> + struct am65_cpsw_port *port)
>> +{
>> + const char *name = "serdes-phy";
>> + struct phy *phy;
>> + int ret;
>> +
>> + phy = devm_of_phy_get(dev, port_np, name);
>> + if (PTR_ERR(phy) == -ENODEV)
>> + return 0;
>> +
>> + /* Serdes PHY exists. Store it. */
>
> "phy" may be a different error here (e.g. -EPROBE_DEFER)...
The Serdes is automatically configured for multi-link protocol (Example: PCIe +
QSGMII) by the Serdes driver, due to which it is not necessary to invoke the
Serdes configuration via phy_init(). However, for single-link protocol (Example:
Serdes has to be configured only for SGMII), the Serdes driver doesn't configure
the Serdes unless requested. For this case, the am65-cpsw driver explicitly
invokes phy_init() for the Serdes to be configured, by looking up the optional
device-tree phy named "serdes-phy". For this reason, the above section of code
is actually emulating a non-existent "devm_of_phy_optional_get()". The
"devm_of_phy_optional_get()" function is similar to the
"devm_phy_optional_get()" function in the sense that the "serdes-phy" phy in the
device-tree is optional and it is not truly an error if the property isn't present.
Thank you for pointing out that if the Serdes driver is built as a module and
the am65-cpsw driver runs first, then the "phy" returned for "serdes-phy" will
be "-EPROBE_DEFER".
>
>> + port->slave.serdes_phy = phy;
>> +
>> + ret = am65_cpsw_enable_phy(phy);
>
> ... so it will crash when dereferencing phy in phy_init().
>
> I think you want to add an extra check above:
>
> if (IS_ERR(phy))
> return PTR_ERR(phy);
Please let me know if posting a "Fixes" patch for fixing this net-next commit is
the right process to address this.
>
>> + if (ret < 0)
>> + goto err_phy;
>> +
>> + return 0;
>> +
>> +err_phy:
>> + devm_phy_put(dev, phy);
>> + return ret;
>> +}
>> +
>> static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned int mode,
>> const struct phylink_link_state *state)
>> {
>> @@ -1959,6 +2021,11 @@ static int am65_cpsw_nuss_init_slave_ports(struct am65_cpsw_common *common)
>
> Right out of context we have:
>
> port->slave.ifphy = devm_of_phy_get(dev, port_np, NULL);
> if (IS_ERR(port->slave.ifphy)) {
> ret = PTR_ERR(port->slave.ifphy);
> dev_err(dev, "%pOF error retrieving port phy: %d\n",
> port_np, ret);
>
> So if there is only one PHY (named "serdes-phy") in DT, it will be
> used for both ifphy and serdes_phy. Is that intentional?
The PHY corresponding to "ifphy" is meant to be the CPSW MAC's PHY and not the
Serdes PHY. The CPSW MAC's PHY is configured by the
drivers/phy/ti/phy-gmii-sel.c driver and this is NOT an optional PHY, unlike the
Serdes PHY. Therefore, it is assumed that the CPSW MAC's PHY is always provided
in the device-tree, while the Serdes PHY is optional, depending on whether the
Serdes is being configured for single-link protocol or multi-link protocol.
Please let me know if this appears to be an issue and I will fix it based on
your suggestion.
Regards,
Siddharth.
next prev parent reply other threads:[~2023-01-18 5:51 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-04 10:34 [PATCH net-next v6 0/3] Add support for QSGMII mode for J721e CPSW9G to am65-cpsw driver Siddharth Vadapalli
2023-01-04 10:34 ` [PATCH net-next v6 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Add J721e CPSW9G support Siddharth Vadapalli
2023-01-17 13:45 ` Geert Uytterhoeven
2023-01-17 17:17 ` Krzysztof Kozlowski
2023-01-18 17:21 ` Raghavendra, Vignesh
2023-01-04 10:34 ` [PATCH net-next v6 2/3] net: ethernet: ti: am65-cpsw: Enable QSGMII mode for J721e CPSW9G Siddharth Vadapalli
2023-01-04 10:34 ` [PATCH net-next v6 3/3] net: ethernet: ti: am65-cpsw: Add support for SERDES configuration Siddharth Vadapalli
2023-01-17 13:55 ` Geert Uytterhoeven
2023-01-18 5:47 ` Siddharth Vadapalli [this message]
2023-01-18 10:27 ` Geert Uytterhoeven
2023-01-18 11:27 ` Siddharth Vadapalli
2023-01-05 11:30 ` [PATCH net-next v6 0/3] Add support for QSGMII mode for J721e CPSW9G to am65-cpsw driver patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=69d39885-68df-7c94-5a98-5f1e174c7316@ti.com \
--to=s-vadapalli@ti.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=geert@linux-m68k.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
--cc=srk@ti.com \
--cc=vigneshr@ti.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®