mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Wu Zhangjin <wuzhangjin@gmail.com>
To: linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
	ralf@linux-mips.org
Cc: Wu Zhangjin <wuzhangjin@gmail.com>, Yan Hua <yanh@lemote.com>,
	Philippe Vachon <philippe@cowpig.ca>,
	Zhang Le <r0bertz@gentoo.org>, Zhang Fuxin <zhangfx@lemote.com>,
	loongson-dev <loongson-dev@googlegroups.com>,
	Liu Junliang <liujl@lemote.com>, Erwan Lerale <erwan@thiscow.com>,
	Arnaud Patard <apatard@mandriva.com>
Subject: [PATCH v4 09/16] [loongson] pci: clean up pcimap setup
Date: Thu,  2 Jul 2009 23:23:30 +0800	[thread overview]
Message-ID: <6a16acdd7c6617798d87b064dedbbca26f69a153.1246546684.git.wuzhangjin@gmail.com> (raw)
In-Reply-To: <cover.1246546684.git.wuzhangjin@gmail.com>

fixup the wrong original comment of pcimap, and make the source code
more understandable. and also, some new extra consideration is added in.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
---
 arch/mips/include/asm/mach-lemote/loongson.h |   17 +++++++++++
 arch/mips/include/asm/mach-lemote/pci.h      |    4 +-
 arch/mips/lemote/lm2e/pci.c                  |   41 ++++++++++++++++---------
 3 files changed, 45 insertions(+), 17 deletions(-)

diff --git a/arch/mips/include/asm/mach-lemote/loongson.h b/arch/mips/include/asm/mach-lemote/loongson.h
index 76cc2bd..916eace 100644
--- a/arch/mips/include/asm/mach-lemote/loongson.h
+++ b/arch/mips/include/asm/mach-lemote/loongson.h
@@ -33,4 +33,21 @@ extern void __init prom_init_memory(void);
 extern void __init prom_init_cmdline(void);
 extern void __init prom_init_env(void);
 
+/* PCI Configuration Registers */
+#define LOONGSON_PCI_ISR4C  BONITO_PCI_REG(0x4c)
+
+/* PCI_Hit*_Sel_* */
+
+#define LOONGSON_PCI_HIT0_SEL_L     BONITO(BONITO_REGBASE + 0x50)
+#define LOONGSON_PCI_HIT0_SEL_H     BONITO(BONITO_REGBASE + 0x54)
+#define LOONGSON_PCI_HIT1_SEL_L     BONITO(BONITO_REGBASE + 0x58)
+#define LOONGSON_PCI_HIT1_SEL_H     BONITO(BONITO_REGBASE + 0x5c)
+#define LOONGSON_PCI_HIT2_SEL_L     BONITO(BONITO_REGBASE + 0x60)
+#define LOONGSON_PCI_HIT2_SEL_H     BONITO(BONITO_REGBASE + 0x64)
+
+/* PXArb Config & Status */
+
+#define LOONGSON_PXARB_CFG      BONITO(BONITO_REGBASE + 0x68)
+#define LOONGSON_PXARB_STATUS       BONITO(BONITO_REGBASE + 0x6c)
+
 #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
diff --git a/arch/mips/include/asm/mach-lemote/pci.h b/arch/mips/include/asm/mach-lemote/pci.h
index 92b2f59..3e6b130 100644
--- a/arch/mips/include/asm/mach-lemote/pci.h
+++ b/arch/mips/include/asm/mach-lemote/pci.h
@@ -24,8 +24,8 @@
 
 extern struct pci_ops bonito64_pci_ops;
 
-#define LOONGSON2E_PCI_MEM_START	0x14000000UL
-#define LOONGSON2E_PCI_MEM_END		0x1fffffffUL
+#define LOONGSON2E_PCI_MEM_START	BONITO_PCILO1_BASE
+#define LOONGSON2E_PCI_MEM_END		(BONITO_PCILO1_BASE + 0x04000000 * 2)
 #define LOONGSON2E_PCI_IO_START		0x00004000UL
 
 #endif /* !__ASM_MACH_LEMOTE_PCI_H_ */
diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c
index bee846e..9812c30 100644
--- a/arch/mips/lemote/lm2e/pci.c
+++ b/arch/mips/lemote/lm2e/pci.c
@@ -34,33 +34,44 @@ static struct pci_controller  loongson2e_pci_controller = {
 	.io_offset      = 0x00000000UL,
 };
 
-static void __init ict_pcimap(void)
+static void __init setup_pcimap(void)
 {
 	/*
-	 * local to PCI mapping: [256M,512M] -> [256M,512M]; differ from PMON
-	 *
+	 * local to PCI mapping for CPU accessing PCI space
 	 * CPU address space [256M,448M] is window for accessing pci space
-	 * we set pcimap_lo[0,1,2] to map it to pci space [256M,448M]
-	 * pcimap: bit18,pcimap_2; bit[17-12],lo2;bit[11-6],lo1;bit[5-0],lo0
+	 * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
+	 *
+	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
+	 * 	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
 	 */
-	/* 1,00 0110 ,0001 01,00 0000 */
-	BONITO_PCIMAP = 0x46140;
-
-	/* 1, 00 0010, 0000,01, 00 0000 */
-	/* BONITO_PCIMAP = 0x42040; */
+	BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 |
+		BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) |
+		BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) |
+		BONITO_PCIMAP_WIN(0, 0);
 
 	/*
-	 * PCI to local mapping: [2G,2G+256M] -> [0,256M]
+	 * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
 	 */
-	BONITO_PCIBASE0 = 0x80000000;
-	BONITO_PCIBASE1 = 0x00800000;
-	BONITO_PCIBASE2 = 0x90000000;
+	BONITO_PCIBASE0 = 0x80000000ul;   /* base: 2G -> mmap: 0M */
+	/* size: 256M, burst transmission, pre-fetch enable, 64bit */
+	LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
+	LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
+	LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
+	LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
+
+	/* avoid deadlock of PCI reading/writing lock operation */
+	LOONGSON_PCI_ISR4C = 0xd2000001ul;
 
+	/* can not change gnt to break pci transfer when device's gnt not
+	deassert for some broken device */
+	LOONGSON_PXARB_CFG = 0x00fe0105ul;
 }
 
 static int __init pcibios_init(void)
 {
-	ict_pcimap();
+	setup_pcimap();
 
 	loongson2e_pci_controller.io_map_base = mips_io_port_base;
 
-- 
1.6.2.1


  parent reply	other threads:[~2009-07-02 15:30 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-02 15:15 [PATCH v4 00/16] Cleanup Lemote FuLoong2e Support Wu
2009-07-02 15:18 ` [PATCH v4 01/16] [loongson] eary_printk: Remove existing implementation Wu Zhangjin
2009-07-02 15:19 ` [PATCH v4 02/16] [loongson] kgdb: Remove out-of-date board-specific source code Wu Zhangjin
2009-07-22 20:31   ` Jason Wessel
2009-07-02 15:20 ` [PATCH v4 03/16] [loongson] early_printk: add new implmentation Wu Zhangjin
2009-07-06 10:43   ` Ralf Baechle
2009-07-06 13:57     ` Wu Zhangjin
2009-07-02 15:20 ` [PATCH v4 04/16] [loongson] pm: Remove redundant source code Wu Zhangjin
2009-07-02 15:21 ` [PATCH v4 05/16] [loongson] pm: clean up the reboot support Wu Zhangjin
2009-07-02 15:22 ` [PATCH v4 06/16] [loongson] pci: use existing mips_io_port_base Wu Zhangjin
2009-07-02 15:22 ` [PATCH v4 07/16] [loongson] split the implementation of prom,setup parts Wu Zhangjin
2009-07-02 15:23 ` [PATCH v4 08/16] [loongson] clean up the coding style Wu Zhangjin
2009-07-02 15:23 ` Wu Zhangjin [this message]
2009-07-02 15:24 ` [PATCH v4 10/16] [loongson] rtc: enable legacy RTC driver on fulong Wu Zhangjin
2009-07-02 15:25 ` [PATCH v4 11/16] [loongson] add oprofile support Wu Zhangjin
2009-07-02 15:26 ` [PATCH v4 12/16] [loongson] change naming methods Wu Zhangjin
2009-07-02 15:26 ` [PATCH v4 13/16] [loongson] split common loongson source code out Wu Zhangjin
2009-07-02 15:27 ` [PATCH v4 14/16] [loongson] add a machtype kernel command line argument Wu Zhangjin
2009-07-02 15:27 ` [PATCH v4 15/16] [loongson] add gcc 4.4 support for Loongson2E Wu Zhangjin
2009-07-02 15:28 ` [PATCH v4 16/16] [loongson] update the default config file for fuloong2e Wu Zhangjin
2010-06-17 10:47 ` [PATCH v4 00/16] Cleanup Lemote FuLoong2e Support Stuart Longland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6a16acdd7c6617798d87b064dedbbca26f69a153.1246546684.git.wuzhangjin@gmail.com \
    --to=wuzhangjin@gmail.com \
    --cc=apatard@mandriva.com \
    --cc=erwan@thiscow.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=liujl@lemote.com \
    --cc=loongson-dev@googlegroups.com \
    --cc=philippe@cowpig.ca \
    --cc=r0bertz@gentoo.org \
    --cc=ralf@linux-mips.org \
    --cc=yanh@lemote.com \
    --cc=zhangfx@lemote.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®